Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Planning a Metal Roof Replacement

Are Metal Roofs Fire-Resistant? What Homeowners Should Verify

Metal roofing is often a strong fire-resistant choice, but “metal” alone is not a complete rating. Learn how Class A testing, underlayment, deck materials, penetrations, and installation work together.

Quick answer

Yes—metal roofs are generally fire-resistant: many metal shingles and panels can be part of a Class A roof assembly under UL 790 or ASTM E108, but the rating applies to a tested assembly and depends on deck, underlayment, penetrations, and installation matching the evaluated configuration.

Key takeaways

  • Metal is noncombustible in ordinary roof-fire conditions, but the complete roof—not just the panel—must be evaluated for a meaningful Class A claim[1][2].
  • Class A is the highest roof-covering classification; it addresses exterior flame, intermittent flame, and burning-brand exposure under UL 790 or ASTM E108[1][3].
  • A Class A product can be paired with a combustible deck and still need a listed underlayment, gypsum layer, or other tested protection; installation must match the tested assembly[1][2].
  • Ask for the exact product report, assembly details, penetrations and edge treatment, and local code requirements rather than accepting “fireproof” as a blanket promise[1][4].

Are metal roofs fire-resistant?

Steel, aluminum, and other common metal roof materials do not readily ignite like combustible roof coverings, which is why metal shingles and panels are widely used in fire-resistant roof designs[2]. That provides a useful layer against embers and exterior flame exposure. Extreme heat can affect coatings, sealants, fasteners, adjacent materials, and the structure beneath the covering.

A roof can be exposed to a severe wildfire, interior fire, falling debris, or wind-driven embers through a vent or joint. FEMA emphasizes that the full roof assembly should satisfy Class A testing, not merely the covering by itself[1]. Treat the rating as evidence about a defined test configuration—not a guarantee that a home cannot ignite or that fire damage will be prevented.

What the fire-rating evidence tells you
EvidenceWhat it supportsWhat it does not prove
Metal panel or shingle product data[2]Material and product-level performanceThat the installed roof assembly has the same rating
UL 790 or ASTM E108 Class A assembly report[1][3]Performance of the specified tested roof build-upThat different layers or installation will qualify
ICC-ES evaluation report[4]Product materials, installation, fire classification, and other listed propertiesThat every local jurisdiction accepts every configuration
Written scope and installation instructions[2][4]What will be installed and howA guarantee against wildfire or fire damage

What does a Class A roof rating measure?

Roof classifications are commonly Class A, B, or C, with Class A providing the highest level of resistance in the roof-covering classification system[3]. UL 790 and ASTM E108 evaluate exterior fire exposure through tests such as flame spread, intermittent flame, and burning-brand exposure[3].

The important distinction is product versus assembly. A metal panel may have documentation for a product, while the house has a deck, underlayment, insulation, battens, fasteners, flashings, and penetrations. Those components can change the result[1][2]. Sheffield Metals explains that an assembly must be installed in the manufacturer’s specified configuration to qualify for its tested rating[2]. The contractor should identify the applicable document and included components.

Why do deck and underlayment affect fire resistance?

Metal skin does not erase combustible materials below it. PNNL’s Building America guidance notes that metal roofs in wildfire-prone areas generally need a noncombustible deck or fire-resistant underlayment for the roof assembly to qualify as Class A[4]. FEMA likewise lists fire-resistant underlayment and sheathing as important design considerations and describes gypsum or fiber-cement protection as examples[1]. The correct layer depends on the tested system, roof design, and code—not on a universal recipe.

This is why a homeowner should ask whether the proposal is a replacement down to the deck, a roof-over, or another configuration. Existing sheathing condition, concealed damage, and the selected underlayment can affect both fire performance and water management. PNNL advises consulting the product’s ICC Evaluation Service report for material, installation, fire classification, wind, and impact details[4]. Do not assume that two roofs with the same visible metal finish have the same tested assembly.

How do embers, vents, and edges create weak points?

Wildfire exposure is not only a sheet-of-flame problem. FEMA identifies embers, ash, sparks, radiant heat, and direct flame contact as ignition pathways; roof penetrations can give burning material access to combustible layers[1]. Valleys, eaves, roof-to-wall joints, skylights, vents, and accumulated debris also deserve attention because geometry and gaps can create places for embers to lodge. The covering is strongest when those transitions are detailed as one system.

The practical verification question is not simply “Is the metal Class A?” Ask how the proposed system treats pipe boots, chimneys, skylights, ridge and soffit ventilation, valleys, eaves, rakes, and wall intersections. FEMA recommends appropriate flashing and approved firestop treatment where required[1]. Do not climb onto a roof to inspect these areas; request documentation or a professional inspection instead.

Do standing seam and metal shingles have different fire claims?

Standing seam panels and metal shingles are different system families, not interchangeable fire claims. PNNL describes standing seam panels as concealed-fastener systems and metal shingles as a separate category, with each requiring its own slope, deck, attachment, and manufacturer instructions[4]. Both may be used in Class A assemblies, but the classification belongs to the documented configuration. The profile alone does not establish a rating.

Bishop's stated installed systems are stone-coated steel shingles and standing seam metal roofing, and the company identifies itself as a residential metal-only roofing specialist. For a Bishop's proposal—or any proposal—request the named product, gauge or material information where relevant, underlayment, deck assumptions, assembly report, and installation requirements. The written scope should identify inclusions and field-condition allowances.

What documents should I verify before signing a roofing proposal?

Start with five documents or answers: the exact product data sheet; the Class A listing or evaluation report; the tested assembly layers; the manufacturer’s installation instructions; and the local code requirements. PNNL notes that manufacturers normally provide reports with fire classification and installation details, while local jurisdictions may impose requirements beyond the model code[4]. If a proposal says only “fire-resistant metal,” ask for the specific evidence behind that phrase.

Then compare the proposal to the evidence. Confirm whether the report covers the roof deck and underlayment you will receive, whether roof-over construction is included, how penetrations and edges are detailed, and who handles permit questions. Get any change in materials or assemblies in writing. Because listings and local requirements can change, current manufacturer documentation and the authority having jurisdiction should control—not an old brochure or verbal assurance[1][4].

How does Bishop's Metal Roofing fit into the decision process?

Bishop's Metal Roofing says it serves all incorporated communities in Missouri and Illinois and focuses on residential metal-only roofing. These facts define scope, but do not replace project-specific fire documentation.

A useful conversation with a metal-only specialist identifies the roof system, tested assembly, deck and underlayment assumptions, instructions, and written scope. Bishop's states a 50-year warranty, but its current written warranty controls all terms; warranty duration is not the same thing as a fire rating or a promise of fire survival. No contractor can guarantee that a home will avoid wildfire or fire damage.

What conclusion should homeowners draw about metal roof fire resistance?

Metal roofing is a credible fire-resistant choice because many metal shingles and panels can achieve or contribute to Class A performance, and government guidance identifies metal coverings among common Class A options[1][4]. That advantage is most meaningful when the roof is designed as a complete assembly with compatible deck protection, underlayment, flashing, edge treatment, and penetration details. The installation must follow the tested instructions and applicable code.

Keep the product report and scope with your records, and address roof maintenance and nearby combustible debris through safe, local guidance. Ask for exact Class A documentation and its limits.

This educational article is general information, not a diagnosis, code determination, legal advice, financial advice, insurance advice, or a guarantee of fire performance. Roof ratings depend on the specific tested assembly, products, installation, site conditions, and applicable jurisdiction. Do not access a roof unsafely; use a qualified professional and confirm current requirements with the manufacturer and local authority having jurisdiction. Bishop's current written proposal and warranty control its services and terms.

FAQ

Are Metal Roofs Fire-Resistant: common questions

Are steel roofs fireproof?

No. Steel is noncombustible in ordinary roof-fire conditions, and many steel shingles and panels can be used in Class A assemblies[1][2]. “Fireproof” overstates what a roof can promise: extreme heat, embers entering openings, combustible decking, adjacent construction, and structural damage can still create risk. Ask for the exact Class A assembly report, including deck and underlayment, and confirm that the planned installation matches it. A rating describes tested performance under defined conditions; it does not guarantee that a particular home will survive every fire.

Is Class A the best metal roof fire rating?

Class A is the highest classification in the common A, B, and C roof-covering system[3]. It indicates the tested roof product or assembly performed best among those classifications during exterior flame-spread, intermittent-flame, and burning-brand tests under UL 790 or ASTM E108[3]. It still matters whether the rating applies to the complete assembly or only a product. Homeowners should request the report number, tested layers, installation method, and any limitations rather than relying on a label detached from its documentation.

Does a metal roof protect my house from wildfire embers?

It can reduce one important ignition vulnerability, because metal shingles and panels are commonly used in Class A roof assemblies[1]. But embers can collect in valleys, gutters, roof edges, joints, vents, and other openings, and a detached or poorly detailed roof can expose combustible layers[1]. FEMA recommends considering the entire roof assembly, flashing, penetrations, and wind resistance. Keep combustible debris away where local guidance recommends, and have roof details evaluated by a qualified professional rather than attempting unsafe roof access.

What should I ask a roofer about fire resistance?

Ask for the named product, the Class A listing or evaluation report, and the complete tested assembly: deck, underlayment, fasteners, panels or shingles, flashings, edges, and penetrations[1][2][4]. Ask whether the report covers the proposed roof-over or replacement method, and request the manufacturer’s installation instructions. Confirm local code or permit requirements with the contractor and authority having jurisdiction. Put substitutions and exclusions in writing. If the answer is only “metal is fireproof,” that is a reason to request more precise documentation, not a basis for signing.

Does Bishop's Metal Roofing provide a fire rating or fire guarantee?

Those facts do not establish one fire rating for every project. The applicable rating comes from the selected manufacturer’s documented assembly and installation[1][4]. Ask Bishop's to identify that documentation in the written scope. Its stated 50-year warranty is governed by the current written warranty and should not be interpreted as a guarantee against fire or wildfire damage.

References

Sources

  1. Maui Wildfires Mitigation Assessment Team Recovery Advisory #3: Designing New Residential Structures to Decrease Wildfire Damage — Federal Emergency Management Agency (FEMA)
  2. Fire Ratings for Roofs: Class A and Product vs. Assembly — Sheffield Metals International
  3. Roof Ratings — UL Code Authorities
  4. Metal Roofs — Pacific Northwest National Laboratory Building America Solution Center
  5. Fire Performance: Are Metal Roofs Fire-Resistant? — Metal Roofing Alliance
  6. Metal Roof Fire Resistance - Class A, B & C Fire Rated Roof Systems — Metal Construction Association / MBCI

Built to last. Backed by Bishop's.

Make your next roof your last.

Two metal systems, one installation standard. In a consultation we inspect the roof, explain which system fits the house, and put the scope, warranty and financing options in writing.

Schedule consultation Call now