Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Jackson County, Missouri

Metal Roofing in Lee's Summit, MO

Metal roofs for Lee's Summit's 1990s-era housing, matched to the hail, wind and zone 4A winters recorded here.

Quick answer

Bishop's Metal Roofing installs Stone-Coated Steel Shingles and Standing Seam Metal Roofing on Lee's Summit, MO homes, and with 18 days of 1-inch-plus hail and 50 days of 58-mph-plus wind within 10 miles from 2016 through 2025, the detail to get right here is edge and ridge fastening.

Population
107,5142025 Census estimate
Median home built
1994ACS 2020–2024
1-inch hail days
18Within 10 mi, 2016–2025
Climate zone
4AIECC 2021
01

Local roof brief

What should you check before putting a metal roof on a home in Lee's Summit?

Lee's Summit faces notable severe wind and tornado activity that influences metal roof detailing: 50 severe-wind days and a recorded 81 mph gust mean edge, rake and ridge fastening should be specified for high uplift. Hail is also a factor: 18 days of 1.0"+ hail and a largest reported 3.0" hailstone argue for impact-rated panels or coatings. Winter exposure includes 7 winter-storm days and 3 ice-storm days in nearby Jackson County, consistent with IECC Climate Zone 4A—consider ice-barrier and targeted snow retention. Much of the housing stock is relatively modern (median year built 1994, 36% built 2000 or later), so roof replacements often must address HOA or aesthetic guidelines. Bishop's Metal Roofing installs Stone-Coated Steel Shingles and Standing Seam; Stone-Coated often matches suburban shingle-style neighborhoods while Standing Seam suits clean, contemporary profiles.

02

Roof report

The Lee's Summit roof record: storms, climate and homes

Hail, 2016–2025, within 10 miles of Lee's Summit
Days with hail 1 inch or larger1849 reports
Days with hail 1.75 inches or larger9
Days with hail 2 inches or larger2
Largest hail reported3 inJuly 17, 2023
Most recent 1-inch hailSeptember 16, 2025
Peak hail monthMarch
Wind and tornadoes, 2016–2025
Days with wind 58 mph or stronger50136 reports
Highest wind81 mphMeasured, May 25, 2024
Tornado tracks within 10 miles11Strongest EF3, March 6, 2017
Winter and climate
IECC climate zone4AMixed, humid
Winter-storm days (Jackson County)7
Ice-storm days (Jackson County)3Latest January 2020
Housing snapshot (ACS 2020–2024)
Median year built1994
Built before 19607%
Built before 198025%
Built 2000 or later36%
Median home value$341,000
Housing units42,240
Owner-occupied73%
Single-family detached72%

Storm counts are NOAA Storm Events reports within 10 miles of Lee's Summit's Census center point, January 2016 through December 2025; winter days are coded to Jackson County. Reports depend on spotters and population, so rural totals run low. How we measure.

03

What it means

What do these numbers mean for roofs in Lee's Summit?

  1. Wind and tornadoes: fasten the edges

    From 2016 through 2025, 50 days brought severe wind within 10 miles of Lee's Summit, with a measured peak of 81 mph on May 25, 2024. That peak matches hurricane-force speed. 11 tornado tracks passed within 10 miles; the strongest was rated EF3 on March 6, 2017. Roofs fail at the edges first in wind like that; get the eave, rake and ridge fastening schedule and the assembly's uplift rating in the scope.

  2. Hail: put impact ratings in writing

    Within 10 miles of Lee's Summit, hail of at least 1 inch fell on 18 days from 2016 through 2025, and the largest report was 3 inches on July 17, 2023. March has the most reports in the local record. The most recent 1-inch event was September 16, 2025. Hail in that range marks nearly any roof surface; specify a UL 2218 Class 4 product and get the warranty's cosmetic-damage language in writing. Hail and impact ratings explained.

  3. Snow load: plan retention and ice barrier

    Lee's Summit is in IECC climate zone 4A, and Jackson County recorded 7 winter-storm days and 3 ice-storm days from 2016 through 2025 (most recent ice storm: January 2020). Ice-barrier underlayment at eaves and valleys is cheap insurance here, and snow guards are worth it over doors and walkways.

  4. Newer neighborhoods: clear the HOA first

    36% of the 42,240 housing units in Lee's Summit were built in 2000 or later (median year built 1994). Subdivisions this young usually have architectural covenants; submit the exact profile and color for approval first, which is where shingle-profile stone-coated steel tends to fit.

04

Two systems

Stone-coated steel or standing seam: which suits Lee's Summit?

Stone-Coated Steel Shingles in Lee's Summit

Steel panels with a bonded stone granule finish that look like shingles, shake or tile. The natural fit for traditional pitched roofs, HOA neighborhoods and owners who want a familiar look with a steel core.

Standing Seam Metal Roofing in Lee's Summit

Continuous vertical panels with raised, concealed-fastener seams. The fit for clean modern lines, farmhouse and lake homes, low-slope sections and fast snow shedding.

05

Permits & codes

Permits, codes and planning for metal roofs in Lee's Summit

Begin a Lee’s Summit metal-roof project by evaluating roof geometry, deck condition, drainage paths, penetrations, access, and city permit requirements. Bishop’s installs two residential systems: Stone-Coated Steel Shingles and Standing Seam Metal Roofing; permits are filed through the CityView portal and code review changes October 1, 2026.

What Lee’s Summit factors affect my roof decision?

Lee’s Summit is a homeowner market rather than a uniform housing type. Census QuickFacts reports a 73.4% owner-occupied housing rate for 2020–2024, 40,526 households, and 63.90 square miles of land area in 2020.[4] That range supports a roof-by-roof approach: a compact ranch, a steep multi-gable home, and a newer low-slope addition can call for different access, drainage, trim, and material discussions.

The National Weather Service documented several tornadoes in Lee’s Summit in July 2015; the most significant caused minor structural damage, while the storms brought heavy rain and flash flooding.[3] A roof evaluation can therefore identify existing wind-related wear, drainage paths, attic ventilation, and vulnerable transitions before a system is selected.

Lee’s Summit metal-roofing comparison points
ConsiderationStone-Coated Steel ShinglesStanding Seam Metal Roofing
Profile and visual scaleDimensional premium metal-shingle profile; review how it relates to the home’s architecture.Long-panel, linear appearance; review panel direction and seam layout.
Roof geometryDiscuss hips, valleys, dormers, and smaller planes during measurement.Discuss panel lengths, valleys, penetrations, and seam details during measurement.[5]
Movement and fasteningConfirm the applicable product installation details for the selected shingle system.Concealed clips can accommodate panel movement; the specific panel system and details matter.[5]
City and property checksCoordinate scope with CityView permit requirements and the address-specific roof review.[1]Coordinate scope with CityView permit requirements and the address-specific roof review.[1]

What residential metal systems does Bishop’s install?

Stone-Coated Steel Shingles are Bishop's dimensional premium metal-shingle option. They can be a useful conversation for an owner who prefers a shingle-scale appearance or whose roof has dormers, hips, valleys, and other changes in plane. Fit still depends on measured slopes, field conditions, flashing locations, substrate condition, and the manufacturer’s applicable installation requirements; a profile preference does not replace that review.

Standing Seam Metal Roofing uses long panels and concealed fasteners. A manufacturer describes standing-seam systems as panels secured with clips that accommodate thermal movement, with snap-lock and mechanically seamed variations.[5] For a Lee’s Summit home, the inspection should establish panel direction, eave and ridge details, valleys, penetrations, panel lengths, and how expansion and contraction will be addressed in the chosen system.

How do Lee’s Summit permits and code timing work?

Lee’s Summit states that roofing permits must be submitted through the CityView Online Portal and that permits may be obtained by a licensed contractor or a homeowner for that homeowner’s primary residence.[1] Confirm the application pathway, scope description, documents, and inspection expectations with Development Services before scheduling work.

The city says projects submitted before October 1, 2026 are reviewed under the listed 2018 I-Codes, while projects submitted on or after that date are reviewed under the listed 2024 I-Codes.[2] That published transition is a planning checkpoint, not design advice. The permit authority determines the applicable requirements, and the selected system’s documentation should be coordinated to the submitted scope.

How should water, drainage, and floodplain be reviewed?

The City participates in FEMA’s National Flood Insurance Program and explains that its current Flood Insurance Rate Maps became effective January 20, 2017. It also notes that work in a designated Special Flood Hazard Area requires a Floodplain Development Permit before it starts.[6] A roof project does not establish a property’s flood status, so owners should check the address and any site-work implications separately from the roofing permit.

At the roof level, property-specific review should trace water from each plane to gutters, downspouts, valleys, sidewalls, skylights, chimneys, and lower roofs. It should record drainage limitations, leaf accumulation zones, and signs of moisture at the deck or attic. These observations shape flashing and scope decisions better than a citywide climate statement.

How should homeowners document and inspect after severe weather?

Lee’s Summit’s documented tornado and heavy-rain event is a reason to discuss details, not to make impact or leak promises.[3] Before work, photograph the roof, note prior repairs, identify branches and site access, and review proposed transitions around penetrations and wall intersections. After severe weather, use a qualified inspection and the written product and installation documentation to understand roof condition.

National Weather Service guidance says damaging wind or large hail may approach during a severe thunderstorm warning and directs people to a secure location.[7] That is personal-safety guidance, not a roofing test standard. Keep permit records, the signed scope, material information, and current warranty documents together for later reference.

What determines whether shingles or standing seam is right?

A generic municipality service page can describe broad service availability, but this Lee’s Summit regional page adds city-specific permit routing, the published code transition, Census housing context, severe-weather history, and floodplain resources.[1][2][3][4][6] It does not state that Bishop's has a local office, and it does not substitute regional facts for an inspection or an authority determination.

What remains property-specific is decisive: roof measurements, pitch, deck and attic condition, roof-to-wall intersections, skylights, chimneys, drainage, access, electrical clearances, neighborhood or association rules, product profile, color, permit documents, and final scope. Those findings determine whether Stone-Coated Steel Shingles or standing seam is the more appropriate Bishop's option for the individual home.

06

Community

About Lee's Summit, Missouri

Lee's Summit is an incorporated Missouri city in Jackson County that extends south into Cass County. The U.S. Census Bureau estimates 107,514 residents as of July 1, 2025. The city reports 65.87 square miles and identifies I-470, U.S. 50, M-291, and M-150 as key highways; regional lakes named include Longview Lake, Lake Jacomo, and Blue Springs Reservoir.

Community sources: U.S. Census Bureau QuickFacts: Lee's Summit city, Missouri · City of Lee's Summit Demographics & Stats · National Weather Service Kansas City/Pleasant Hill Severe Weather Preparedness Week · U.S. Census Bureau Congressional District 5 Map, Missouri

FAQ

Lee's Summit metal roofing questions

How common is damaging hail in Lee's Summit, and what does it mean for a metal roof?

Damaging hail has occurred 18 days with 1.0" or larger stones within 10 miles (2016–2025). That frequency supports asking about impact-rated metal products tested to UL 2218 Class 4 or similar impact measures to reduce cosmetic and functional risk.

What is the strongest storm wind recorded near Lee's Summit?

Severe wind events include 50 days with 58+ mph wind and a highest measured gust of 81 mph. Those wind levels make edge, rake, ridge and fastener details important for metal roofs to resist uplift and loosening during storms.

How much snow and ice protection does a metal roof need in Lee's Summit?

Nearby Jackson County had 7 winter-storm days and 3 ice-storm days (2016–2025), and the area is IECC Climate Zone 4A. Those conditions support using an ice-barrier at eaves and considering snow-retention above entries and high-traffic areas.

Does a metal roof make sense on a newer Lee's Summit house?

Many homes are relatively new (median year built 1994; 36% built 2000 or later). For newer homes, a metal roof can be matched to neighborhood appearance and HOA rules—Stone-Coated Steel often aligns with shingle-style subdivisions, while Standing Seam offers a more modern look.

Do I need a permit to replace a roof in Lee’s Summit?

Lee’s Summit states that roofing permits must be submitted through its CityView Online Portal. The city also says permits may be obtained by a licensed contractor or by a homeowner for that homeowner’s primary residence. Confirm the current application materials, scope, fees, and inspection needs directly with Development Services before work is scheduled.[1]

Which building codes apply to a Lee’s Summit metal-roof project?

The city’s published schedule says projects submitted before October 1, 2026 are reviewed under the listed 2018 I-Codes, while those submitted on or after that date are reviewed under the listed 2024 I-Codes. The city and permit reviewer determine requirements for a particular project, so submission timing and the final scope matter.[2]

What metal roofing choices does Bishop's install for residences?

Bishop's is a residential metal-only specialist serving Missouri and Illinois. Its two residential systems are Stone-Coated Steel Shingles, described here as a premium dimensional metal-shingle option, and Standing Seam Metal Roofing. The appropriate choice depends on the home’s geometry, drainage, penetrations, deck condition, desired appearance, and documented system requirements.

References

Lee's Summit permit and code sources

  1. Construction Permits — City of Lee’s Summit
  2. Building Codes & Amendments — City of Lee’s Summit
  3. July 1, 2015 - Lee’s Summit Tornado — National Weather Service Kansas City/Pleasant Hill, Missouri
  4. U.S. Census Bureau QuickFacts: Lee’s Summit city, Missouri — U.S. Census Bureau
  5. Standing Seam Metal Roof Panels — MBCI
  6. Floodplain Information — City of Lee’s Summit
  7. Severe Thunderstorm Safety — National Weather Service

Consultation

Schedule your Lee's Summit roofing consultation

Tell us about the house. We'll inspect the roof, recommend Stone-Coated Steel or Standing Seam for it, and put the scope, warranty and financing options in writing.

We use your details only to schedule your consultation. See our privacy policy.
Schedule consultation Call now