Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Greene County, Missouri

Metal Roofing in Springfield, MO

Metal roofs for Springfield's 1970s-era housing, matched to the hail, wind and zone 4A winters recorded here.

Quick answer

Bishop's Metal Roofing installs Stone-Coated Steel Shingles and Standing Seam Metal Roofing on Springfield, MO homes, and with 22 days of 1-inch-plus hail and 66 days of 58-mph-plus wind within 10 miles from 2016 through 2025, the detail to get right here is a tested uplift rating and secure perimeter trim.

Population
169,8472025 Census estimate
Median home built
1975ACS 2020–2024
1-inch hail days
22Within 10 mi, 2016–2025
Climate zone
4AIECC 2021
01

Local roof brief

What should you check before putting a metal roof on a home in Springfield?

Springfield has local storm exposure that affects roof decisions: 66 severe-wind days and an estimated peak gust of 91 mph imply careful edge, rake and ridge fastening and tested wind attachment details; 11 tornado tracks within 10 miles and a strongest EF2 (April 30, 2019) argue for attention to uplift resistance. Hail is frequent and can be large — 22 days of 1.0"+ hail and a largest reported hail of 2.25" (May 4, 2020) — so ask about impact-rated products tested to UL 2218 Class 4. Winter needs include 11 winter-storm days and 2 ice-storm days, plus IECC climate zone 4A, indicating ice-barrier at eaves and targeted snow retention above entries. With a median house year of 1975 and 58% built before 1980, inspect the roof deck and plan for full tear-off if decking or layers are deteriorated. Bishop's Metal Roofing installs Stone-Coated Steel Shingles and Standing Seam; Stone-Coated often fits established neighborhood aesthetics, while Standing Seam tends to suit simpler roof geometry and elevated wind performance.

02

Roof report

Springfield roof weather and housing report

Hail, 2016–2025, within 10 miles of Springfield
Days with hail 1 inch or larger2261 reports
Days with hail 1.75 inches or larger6
Days with hail 2 inches or larger1
Largest hail reported2.25 inMay 4, 2020
Most recent 1-inch hailSeptember 15, 2025
Peak hail monthMay
Wind and tornadoes, 2016–2025
Days with wind 58 mph or stronger66238 reports
Highest wind91 mphEstimated, April 29, 2025
Tornado tracks within 10 miles11Strongest EF2, April 30, 2019
Winter and climate
IECC climate zone4AMixed, humid
Winter-storm days (Greene County)11
Ice-storm days (Greene County)2Latest February 2019
Housing snapshot (ACS 2020–2024)
Median year built1975
Built before 196029%
Built before 198058%
Built 2000 or later19%
Median home value$178,000
Housing units84,761
Owner-occupied44%
Single-family detached60%

Storm counts are NOAA Storm Events reports within 10 miles of Springfield's Census center point, January 2016 through December 2025; winter days are coded to Greene County. Reports depend on spotters and population, so rural totals run low. How we measure.

03

What it means

How should Springfield's storm and housing record shape your roof?

  1. Tornado country: secure the perimeter

    NOAA recorded 58-mph-plus wind within 10 miles of Springfield on 66 days; the top gust, 91 mph (estimated), came on April 29, 2025. That peak matches hurricane-force speed. 11 tornado tracks passed within 10 miles; the strongest was rated EF2 on April 30, 2019. Wind failures start at the perimeter, so ask how eave, rake and ridge trim is fastened and which uplift rating the full assembly carries.

  2. Hail: impact class comes first

    Within 10 miles of Springfield, hail of at least 1 inch fell on 22 days from 2016 through 2025, and the largest report was 2.25 inches on May 4, 2020. Most of those reports came in May. The most recent 1-inch event was September 15, 2025. At that size, confirm UL 2218 Class 4 testing for the exact panel or shingle being quoted, and ask whether cosmetic dents are excluded from coverage. Hail and impact ratings explained.

  3. Snow and ice: retention and ice barrier

    Springfield is in IECC climate zone 4A, and Greene County recorded 11 winter-storm days and 2 ice-storm days from 2016 through 2025 (most recent ice storm: February 2019). Snow leaves a metal roof in sheets, so mark the doors, walks and lower roofs that need snow retention, and confirm ice barrier at eaves and valleys.

  4. 1970s homes: check the deck first

    Half of Springfield's 84,761 housing units were built in or before 1975, and 29% predate 1960. Roofs that age often hide extra shingle layers, plank decking with gaps and undersized ventilation. Expect a full tear-off, deck repairs priced per sheet, and an intake-and-exhaust ventilation plan in the scope.

04

Two systems

Which metal roof fits homes in Springfield?

Stone-Coated Steel Shingles in Springfield

Steel panels with a bonded stone granule finish that look like shingles, shake or tile. The natural fit for traditional pitched roofs, HOA neighborhoods and owners who want a familiar look with a steel core.

Standing Seam Metal Roofing in Springfield

Continuous vertical panels with raised, concealed-fastener seams. The fit for clean modern lines, farmhouse and lake homes, low-slope sections and fast snow shedding.

05

Permits & codes

Permits, codes and planning for metal roofs in Springfield

Metal roofing can be practical in Springfield when the roof geometry, drainage, and installation details support the selected system. Bishop's installs two residential options—Standing Seam Metal Roofing and Stone-Coated Steel Shingles—and proposals should address valleys, flashings, underlayment, ventilation, and local permits given Springfield’s precipitation and snowfall normals.

What are Springfield’s climate normals for roofing?

Springfield’s 1991–2020 normals report 44.71 inches of precipitation and 13.7 inches of snowfall annually[1]. They are averages, not a forecast or design load, but they make valleys, walls, penetrations, eaves, gutters, and drainage central to a metal-roof discussion.

NWS Springfield also provides location-based snowfall and ice forecasts[3]. A city average cannot prescribe a roof solution: pitch, orientation, shade, tree cover, overhangs, drainage discharge, access below eaves, and structure must be assessed at the property.

Springfield metal-roofing decision matrix
Decision pointStanding Seam Metal RoofingStone-Coated Steel Shingles
Visual directionLong, raised seams and a clean linear expression.Dimensional premium-metal shingle appearance.
Start withPanel layout, seam approach, edges, and penetrations.Selected profile, shingle layout, and accessory details.
Roof geometry questionCan the roof planes and transitions support a considered panel layout?Does a segmented shingle profile better suit the desired appearance and roof layout?
Documentation to requestExact panel system, attachment/seam details, underlayment, flashing, and manufacturer instructions.Exact shingle profile, deck or batten approach where applicable, accessories, underlayment, and manufacturer instructions.
Springfield reviewCheck runoff, valleys, eaves, gutters, snow/ice management, and local approval path.Check the same water-management and approval items; appearance does not replace detailing.
Do not assumeThat one standing-seam system’s test data or warranty applies to every assembly.That a stone-coated steel profile makes a complex roof detail automatic.

What metal roofing systems does Bishop’s install?

Bishop's installs Standing Seam Metal Roofing and Stone-Coated Steel Shingles for residential projects. Standing seam uses long, raised-seam panels for a crisp, linear appearance. Some manufacturer systems are mechanically field-seamed, showing why seam method, clips, and perimeter details must be system-specific[4].

Stone-Coated Steel Shingles provide a dimensional, shingle-like premium-metal appearance. Manufacturer resources distinguish direct-to-deck, batten, vent, and accessory instructions[5]. Match the exact profile, roof plane, flashing sequence, ventilation plan, and current instructions before selecting either system.

How does roof shape affect system choice?

A simple gable roof and a roof with dormers, valleys, intersecting walls, skylights, or additions demand different details. Standing seam may fit a continuous-panel visual direction; stone-coated steel may fit a dimensional shingle profile.

Map every slope, penetration, valley, edge, wall connection, and drainage outlet before choosing. Review deck condition, attic ventilation, access, and tear-off or overlay feasibility where allowed. Color and trim matter, but should follow the water-shedding and detailing review.

What should I verify about storm and impact claims?

The Metal Roofing Alliance says underlayment and installation quality are as important as roofing material to overall storm performance[6]. It describes UL 2218 impact ratings from Class 1 through Class 4. Request documents for the exact product and assembly; do not assume ratings transfer across profiles or installations.

A metal roof is not hail-proof, leak-proof, maintenance-free, or rust-proof. Metal does not attract lightning simply because it is metal; the alliance identifies location, height, size, and topography as strike factors[7]. After major storms, inspect the roof, flashings, gutters, and surroundings.

What permits and codes apply in Springfield?

Springfield’s Building Development Services maintains a Building Permits & Codes resource[2]. Confirm the current path for the address and scope—replacement, alteration, structural work, deck repair, or accessory changes.

The selected system should align with applicable local requirements and the manufacturer’s current instructions. Ask what documents guide the work, how deck findings are handled, when approvals are checked, and who coordinates inspections if required. Authority approval and warranty terms are separate matters.

How should I evaluate a metal-only contractor for my roof?

Give each bidder the same known conditions, then compare written scope: system and profile, removal or preparation, underlayment, flashings, ventilation, penetrations, trim, debris handling, changes, and payment milestones. A metal-only specialist can explain a focused offering, but every scope still merits line-by-line review.

Ask Bishop's which of its two residential systems fits the roof and why. Bishop's offers financing and states a 50-year warranty. The current written warranty—not a website summary—controls coverage, exclusions, transferability, responsibilities, and all other terms.

What is a property-specific decision process for metal roofing?

Define the problem, then inspect deck, attic, drainage, flashings, and geometry; verify local approvals; and compare both systems against documented conditions. NOAA/NCEI identifies 1991–2020 as the standard 30-year normals period for most purposes[8], but climate normals cannot diagnose a particular roof.

Request a proposal naming the system, scope boundaries, findings, assumptions, warranty documents, and schedule conditions. Allow for concealed conditions discovered during work.

06

Community

About Springfield, Missouri

Springfield is a city in southwest Missouri with an estimated 2025 population of 169,847. The metro spans Greene, Christian, Webster, Polk, and Dallas counties and includes Missouri State University, Drury University, Evangel University, Ozarks Technical Community College, 105 parks, and Ozarks Greenways.

Community sources: About Our Community | City of Springfield, Missouri · Building Permits & Codes | City of Springfield, Missouri · Severe Weather Climatology for the Springfield, MO NWSO County Warning Area | National Weather Service · Regional Planning | City of Springfield, Missouri · City Limits of Incorporated Areas of Greene County, Missouri | City of Springfield Open Data

FAQ

Springfield metal roofing questions

How often does damaging hail reach Springfield, and does it matter for a metal roof?

Springfield has experienced 22 days with hail 1.0" or larger from 2016 through 2025. Yes: frequent and sometimes large hail (largest 2.25" on May 4, 2020) means homeowners should ask about impact-rated products tested to UL 2218 Class 4.

How strong have severe storm winds been around Springfield?

There were 66 severe-wind days within 10 miles from 2016–2025 and an estimated peak gust of 91 mph (April 29, 2025). Those numbers support attention to edge, rake and ridge fastening and specifying wind-rated attachment details.

Do metal roofs in Springfield need snow guards or extra ice protection?

Springfield’s county recorded 11 winter-storm days and 2 ice-storm days (latest ice February 2019) and it lies in IECC climate zone 4A. That profile supports ice-barrier underlayment at eaves and selective snow retention above entries and walkways.

What should a mid-century Springfield homeowner check before switching to metal?

With a median year built of 1975 and 58% of homes built before 1980, inspect the roof deck condition and existing layers. Plan for a full tear-off when decking is deteriorated or multiple layers exist to ensure secure fastening and a flat substrate for metal panels or shingles.

Is metal roofing a practical choice for Springfield, Missouri?

It can be practical when the roof and installation details support the selected system. Springfield’s 1991–2020 normals include 44.71 inches of precipitation and 13.7 inches of snowfall[1], so the proposal should address valleys, flashings, drainage, underlayment, and winter runoff. A site review—not the city average alone—determines fit.

What metal roofing systems does Bishop's install in Springfield?

Bishop's installs Standing Seam Metal Roofing and Stone-Coated Steel Shingles for residential work. Standing seam is the more linear panel look, while stone-coated steel offers a dimensional metal-shingle direction. The appropriate option depends on roof geometry, selected profile, details, desired appearance, and the manufacturer’s current instructions—not a universal ranking.

Do I need a permit for a metal roof in Springfield?

Confirm that directly with Springfield Building Development Services for your address and project scope. The City provides a Building Permits & Codes resource[2], but requirements can differ with location, structural changes, repairs, and associated work. Your contractor should verify the current path rather than treating a general rule as a determination for your home.

References

Springfield permit and code sources

  1. Climatology - Springfield, MO - Monthly Normals — National Weather Service, Springfield, Missouri
  2. Building Permits & Codes — City of Springfield, Missouri
  3. SGF Snow and Ice Potential Forecasts — National Weather Service, Springfield, Missouri
  4. Double-Lok® at Eave Installation — MBCI
  5. Installation Guides — DECRA Metal Roofing
  6. True or False? Pros Share the Best Roofs to Take the Worst Beating From Storms — Metal Roofing Alliance
  7. Other Weather Performance — Metal Roofing Alliance
  8. U.S. Climate Normals Quick Access — NOAA National Centers for Environmental Information

Consultation

Schedule your Springfield roofing consultation

Tell us about the house. We'll inspect the roof, recommend Stone-Coated Steel or Standing Seam for it, and put the scope, warranty and financing options in writing.

We use your details only to schedule your consultation. See our privacy policy.
Schedule consultation Call now