Metal roofing specialists
Why a metal-only roofer?
We don't sell asphalt, tile, slate or cedar. Every crew, every detail and every recommendation is about metal — on homes, two systems.
A metal-only roofer installs metal roofs and nothing else. Bishop's Metal Roofing focuses on two residential systems — Stone-Coated Steel Shingles and Standing Seam Metal Roofing — across Missouri and Illinois, so crews repeat the same manufacturer details on every job and recommendations aren't steered toward a cheaper asphalt roof.
- Installs
- Metal onlyTwo residential systems
- Does not install
- 6 typesAsphalt, tile, slate, cedar, membrane; exposed-fastener on homes
- Service area
- MO & ILStatewide in both
- Warranty
- 50-yearStated; written terms control
Focus
What does metal-only mean in practice?
It means the answer to "which roof should I get?" is always one of two metal systems, chosen for your house. We don't carry asphalt as a fallback, so there is no incentive to talk you into a cheaper roof you'll replace again in fifteen or twenty years.
It also means the crews do the same kinds of work every week: metal trim, flashing details, panel layout, seaming, snow retention. Metal roofs fail at the details, and details are learned by repetition.
- On homes we install: Stone-Coated Steel Shingles and Standing Seam Metal Roofing
- We do not install: asphalt shingles, tile, slate, cedar shakes, membrane (flat) roofing, or exposed-fastener panels on homes
- On commercial properties we also install: exposed-fastener panels, hidden-fastener panels and stone-coated steel
Details
Why do metal roofs need specialist installers?
Steel behaves differently from asphalt. It expands and contracts with temperature, sheds snow in sheets, and depends on formed trim instead of sealant to keep water out. Manufacturer installation instructions spell out clip spacing, fastener types, underlayment and flashing for each system, and the warranty often depends on following them[1][2].
General roofers who install metal a few times a year tend to improvise these details. We'd rather do them the same correct way every time.
| Detail | What goes wrong | What we do |
|---|---|---|
| Thermal movement | Panels fastened too tightly buckle or pull fasteners | Clip and fastener spacing per manufacturer instructions |
| Flashing | Sealant used instead of formed metal at walls and chimneys | Formed counterflashing that laps water outward |
| Underlayment | Standard felt under hot metal | High-temperature underlayment and ice barrier where required[3] |
| Snow | No plan for sliding snow | Snow retention laid out over entries and lower roofs[4] |
Recommendation
How do we decide which metal roof fits your house?
We inspect the roof and ask how you want the house to look. Then the decision is usually straightforward.
| Factor | Stone-Coated Steel Shingles | Standing Seam Metal Roofing |
|---|---|---|
| What it is | Formed steel panels coated with bonded stone granules, shaped to look like shingles, shake or tile | Long vertical steel panels joined by raised seams, with fasteners concealed under the seam |
| Look | Traditional texture; reads like an architectural shingle or shake from the street | Clean vertical lines; modern, farmhouse and lake-home styles |
| Best roof shapes | Pitched roofs with hips, valleys and dormers | Long, simple planes, porches and lower-slope sections |
| Minimum slope (IRC) | 3:12 for metal roof shingles (R905.4.2) | 1/4:12 for standing seam systems (R905.10.2) |
| Snow behavior | Granule texture holds snow longer, so it slides less suddenly | Smooth panels shed snow fast; plan snow retention above entries |
| Hail | Many products carry UL 2218 Class 4 impact ratings; granules mask minor dents | Class 4 ratings available on many panels; thicker gauges resist cosmetic dents better |
| HOA fit | Usually approved where shingle appearance is required | Check architectural rules before ordering |
Process
What does working with a metal-only specialist look like?
The same sequence on every project, from the first visit to the closeout package.
- Consultation and inspection
Roof measurements, deck and attic check, photos, and a conversation about style, budget and timing.
- Written recommendation
One system, profile and color, with tear-off, deck, underlayment, trim, ventilation and snow-retention details listed.
- Documents before signing
Warranty terms and, if requested, the financing offer.
- Installation
Tear-off, deck repair and installation to the manufacturer's instructions.
- Closeout
Walkthrough, clean-up, photos and the warranty package.
FAQ
Why a metal-only roofer: common questions
Does Bishop's Metal Roofing install asphalt shingles?
No. Bishop's is metal-only. On homes we install Stone-Coated Steel Shingles and Standing Seam Metal Roofing, and we do not install asphalt, tile, slate, cedar or membrane roofing.
Why choose a metal-only roofing contractor?
Metal roofs depend on system-specific details — clips, trim, flashing, underlayment and snow retention. A metal-only crew repeats those details on every job and has no reason to steer you toward a cheaper roof.
Do you install exposed-fastener metal panels on homes?
No. On homes we install concealed-fastener Standing Seam and Stone-Coated Steel Shingles only. Exposed-fastener panels are part of our commercial metal roofing work.
Where does Bishop's install metal roofs?
Throughout Missouri and Illinois, from the St. Louis and Kansas City metros to the Chicago suburbs, Springfield, Columbia, Peoria and rural communities.
References
Sources
- Installation Guides — DECRA Metal Roofing
- Standing Seam Roof Clips Best Practices — Metal Construction Association
- 2021 International Residential Code, Chapter 9: Roof Assemblies — International Code Council
- Qualifying Snow Retention Systems for Metal Roofing — Metal Construction Association
Consultation
Schedule Your Roofing Consultation
We inspect the roof, recommend the system that fits, and put the scope, warranty and financing options in writing.