Cook County, Illinois
Metal Roofing in Chicago, IL
Metal roofs for Chicago's 1950s-era housing, matched to the hail, wind and zone 5A winters recorded here.
Bishop's Metal Roofing installs Stone-Coated Steel Shingles and Standing Seam Metal Roofing on Chicago, IL homes, and with 20 days of 1-inch-plus hail and 59 days of 58-mph-plus wind within 10 miles from 2016 through 2025, the detail to get right here is zone 5A snow and ice details.
- Population
- 2,731,5852025 Census estimate
- Median home built
- 1953ACS 2020–2024
- 1-inch hail days
- 20Within 10 mi, 2016–2025
- Climate zone
- 5AIECC 2021
Local roof brief
What matters most for a metal roof in Chicago?
Chicago's climate is IECC 5A with 17 winter-storm event days and 2 ice-storm days recorded in Cook County from 2016–2025, so ice-barrier underlayment at eaves and snow retention near entries is commonly recommended. Severe wind has produced 59 days of ≥58 mph winds and an estimated peak gust of 96 mph, so attention to edge, rake and ridge fastening is important. Much of the housing stock is older (median year built 1953; 58% built before 1960), which increases the likelihood of deck inspection and full tear-off of old layers. Hail has occurred 20 days ≥1.0 inch with a largest reported 1.5-inch event, so ask about impact-rated products tested to UL 2218 Class 4. For Chicago's varied neighborhoods, Standing Seam often fits contemporary and flat-roofed profiles while Stone-Coated Steel Shingles tends to match traditional pitched homes, though final choice depends on the specific structure and ownership rules.
What it means
What do these numbers mean for roofs in Chicago?
- Snow and ice: retention and ice barrier
Chicago is in IECC climate zone 5A, and Cook County recorded 17 winter-storm days and 2 ice-storm days from 2016 through 2025 (most recent ice storm: February 2023). Metal sheds snow fast, so plan snow retention above entries, walkways and lower roofs, and self-adhered ice-barrier underlayment at the eaves and valleys.
- Tornado country: secure the perimeter
NOAA recorded 58-mph-plus wind within 10 miles of Chicago on 59 days; the top gust, 96 mph (estimated), came on June 13, 2022. That peak matches hurricane-force speed. 11 tornado tracks passed within 10 miles; the strongest was rated EF1 on July 15, 2024. Ask which tested uplift rating covers the whole assembly — panels, clips or nails, and trim — not just the panel itself.
- Older homes: plan the tear-off and deck check
Half of Chicago's 1,277,054 housing units were built in or before 1953, and 58% predate 1960. Houses from that period were often re-roofed over the original layer, so the proposal should price a complete tear-off, per-sheet deck replacement and balanced attic ventilation.
- Hail: check the impact rating
Within 10 miles of Chicago, hail of at least 1 inch fell on 20 days from 2016 through 2025, and the largest report was 1.5 inches on February 27, 2024. Most of those reports came in May. The most recent 1-inch event was May 15, 2025. Reported stones here stayed below golf-ball size; installed correctly, a steel roof rides out hail in that range without leaks. Hail and impact ratings explained.
Roof report
The Chicago roof record: storms, climate and homes
| Days with hail 1 inch or larger | 2033 reports |
|---|---|
| Days with hail 1.75 inches or larger | 0 |
| Days with hail 2 inches or larger | 0 |
| Largest hail reported | 1.5 inFebruary 27, 2024 |
| Most recent 1-inch hail | May 15, 2025 |
| Peak hail month | May |
| Days with wind 58 mph or stronger | 59259 reports |
|---|---|
| Highest wind | 96 mphEstimated, June 13, 2022 |
| Tornado tracks within 10 miles | 11Strongest EF1, July 15, 2024 |
| IECC climate zone | 5ACold, moist |
|---|---|
| Winter-storm days (Cook County) | 17 |
| Ice-storm days (Cook County) | 2Latest February 2023 |
| Median year built | 1953 |
|---|---|
| Built before 1960 | 58% |
| Built before 1980 | 75% |
| Built 2000 or later | 15% |
| Median home value | $334,000 |
| Housing units | 1,277,054 |
| Owner-occupied | 46% |
| Single-family detached | 26% |
Storm counts are NOAA Storm Events reports within 10 miles of Chicago's Census center point, January 2016 through December 2025; winter days are coded to Cook County. Reports depend on spotters and population, so rural totals run low. How we measure.
Two systems
Stone-coated steel or standing seam: which suits Chicago?
Stone-Coated Steel Shingles in Chicago
Steel panels with a bonded stone granule finish that look like shingles, shake or tile. The natural fit for traditional pitched roofs, HOA neighborhoods and owners who want a familiar look with a steel core.
Standing Seam Metal Roofing in Chicago
Continuous vertical panels with raised, concealed-fastener seams. The fit for clean modern lines, farmhouse and lake homes, low-slope sections and fast snow shedding.
Permits & codes
Permits, codes and planning for metal roofs in Chicago
For a Chicago home, metal roofing means choosing between Standing Seam Metal Roofing for long vertical-panel lines and Stone-Coated Steel Shingles for a dimensional shingle-style profile; the right choice depends on roof pitch, deck condition, drainage, penetrations, ventilation, permit path, and product instructions.
What does metal roofing in Chicago encompass?
Chicago is not one roof condition. Census Bureau estimates the city had 2,731,585 residents in 2025, and reports a 46.0% owner-occupied housing-unit rate for 2020–2024[7]. Those citywide figures do not identify a home’s roof type, condition, ownership approvals, or jurisdictional constraints. They do reinforce why an address-specific scope is more useful than a generic Chicago recommendation.
For this query, the practical comparison is between the two systems Bishop's installs: Stone-Coated Steel Shingles and Standing Seam Metal Roofing. Bishop's is a residential metal-only specialist serving Missouri and Illinois and offers financing.
| Decision factor | Stone-Coated Steel Shingles | Standing Seam Metal Roofing |
|---|---|---|
| Visual direction | Textured, dimensional metal shingle profile. | Long vertical-panel, architectural profile. |
| Installation documentation | Confirm profile-specific instructions, fastening, accessories, and application limits. | Confirm panel, attachment, seam, thermal-movement, and transition details. |
| Geometry review | Map ridges, hips, valleys, walls, and penetrations to the proposed system. | Map panel runs, seam layout, valleys, walls, and interruptions before selection. |
| Chicago scope check | Confirm pitch, deck or structural repairs, drainage, and permit applicability. | Confirm pitch, deck or structural repairs, drainage, and permit applicability. |
| How to compare proposals | Use a complete written assembly scope, not an appearance sample alone. | Use a complete written assembly scope, not a panel photo alone. |
What Chicago permit rules affect reroofing projects?
Chicago’s Express Permit Program covers many reroofing projects, including repair, recover, and replacement. The City lists roof replacement with no structural work among the eligible work, while structural repairs and recover over two or more existing roof-covering layers require drawings or calculations by an Illinois-licensed architect or structural engineer[1]. A proposal should separate covering replacement from deck or framing corrections discovered during work.
The City also lists a permit exception for repair, recover, or replacement on a pitched roof of at least 2:12 for residential buildings up to four stories and their accessory buildings. It specifically says structural repairs and low-slope roof work require a permit, and exempt work must still comply with applicable codes[2]. Historic status, public-way use, and the final scope can add requirements; verify them with the governing authority.
How does Chicago winter weather affect roof details?
NWS Chicago gives O’Hare 1991–2020 normal dates of November 18 for first measurable snow and April 2 for last measurable snow[3]. That is useful seasonal context, not a load calculation or a forecast for any property. It is a reason to ask how roof planes discharge water, where snow can accumulate or shed, and how eaves, gutters, valleys, walls, and entries will be treated.
Slope, orientation, exposure, surrounding structures, roof height, access, and existing drainage all remain property-specific. A metal roof should not be described as hail-proof, leak-proof, rust-proof, or maintenance-free. Request the proposed system’s documented edge metal, underlayment, flashing, penetration, ventilation, and snow-management approach where conditions warrant it; the appropriate approach depends on the exact roof and product instructions.
What are the two residential metal systems Bishop's installs?
Standing Seam Metal Roofing uses long panels with raised vertical seams. It is worth exploring when a homeowner wants a clean, linear architectural appearance and the roof can be thoughtfully laid out around panel runs, hips, valleys, chimneys, skylights, walls, and other interruptions. The decision is not simply visual: the exact panel system, attachment method, substrate, and transition details belong in the written scope.
Stone-Coated Steel Shingles are premium metal shingles with a textured, dimensional profile. DECRA describes stone-coated roofing as steel sheets with stone granules and standing seam as panels with raised vertical legs; it identifies appearance as a central distinction between the two[6]. Profile preference is legitimate, but the proposed manufacturer, accessories, roof pitch, fastening approach, and application limits still need project-specific confirmation.
Why is installation documentation important for metal roofs?
Metal roofing performs as an assembly, not as a material label. The Metal Construction Association’s installation manual addresses reroofing and retrofit considerations, storage, sealants, fasteners, accessories, final inspection, specifications, and code requirements[5]. That breadth is a useful reminder to compare a complete scope instead of choosing from a panel or shingle sample alone.
For standing seam, ask for the proposed panel and attachment approach, plus details at ridges, eaves, walls, valleys, penetrations, and transitions. For stone-coated steel, ask for the profile-specific installation instructions and listed accessories. The answer may change after measurements and deck observations. Manufacturer instructions and applicable code govern a particular assembly; a general web page cannot substitute for them.
How do I verify a metal-only roofing contractor in Illinois?
Illinois identifies Roofing Contractor as a licensed profession[4]. Before signing, use the state’s License Lookup, which IDFPR says is maintained by the State and updated regularly, to verify the relevant license[4]. Chicago’s reroof application guidance also calls for an Illinois roofing contractor license number and, for applicable permits, a licensed general contractor[1]. Verify active status and match it to the contracting entity.
Ask each bidder for the same essentials: measured roof and slope; deck and framing observations; tear-off or recover assumptions; underlayment; ventilation; flashings; edge metal; gutters or drainage interfaces; cleanup; exclusions; product documentation; and permit responsibilities. Bishop's limited scope is Stone-Coated Steel Shingles and Standing Seam Metal Roofing. That focused comparison may fit a homeowner seeking one of those systems, but it will not fit every roof type or budget.
What warranty, financing, and next steps should I expect?
Bishop's states a 50-year warranty and offers financing. The current written warranty controls every term, including eligibility, exclusions, transfer provisions, maintenance obligations, remedies, and any relationship to manufacturer coverage. Financing is subject to current terms and any approval process. Neither a warranty statement nor financing availability is a quote, a service-life prediction, or a promise of weather performance.
The useful next step is a property-specific evaluation followed by a written scope that distinguishes observed conditions from recommendations. Confirm the City permit path, historic or association approvals, product availability, schedule, and complete documentation before authorizing work.
Community
About Chicago, Illinois
Chicago is a city and the county seat of Cook County in northeastern Illinois. The U.S. Census Bureau estimates Chicago's July 1, 2025 population at 2,731,585 and lists 227.73 square miles of 2020 land area. Cook County contains 134 municipalities; Chicago and its suburbs account for approximately 85% of the county's 946 square miles.
Community sources: U.S. Census Bureau QuickFacts: Chicago city, Illinois · Cook County: About Cook County · City of Chicago: Reroofing · City of Chicago: Roofing Work · National Weather Service Chicago, IL
FAQ
Chicago metal roofing questions
How often does damaging hail reach Chicago, and does it matter for a metal roof?
Hail ≥1.0 inch occurred on 20 days within 10 miles from 2016–2025, with a largest reported 1.5-inch event. That frequency and size make impact resistance relevant; consider products tested to UL 2218 Class 4 for better protection against 1-inch-plus hail.
How hard does severe wind hit Chicago roofs?
Severe winds of 58 mph or higher were recorded on 59 days and the highest reported gust was an estimated 96 mph. Those wind levels call for careful design of edge, rake and ridge fastening, and attachment details appropriate for high-wind events.
Do metal roofs in Chicago need snow guards or extra ice protection?
Cook County recorded 17 winter-storm event days and 2 ice-storm days from 2016–2025, and Chicago sits in IECC climate zone 5A. That combination supports using ice-barrier underlayment at eaves and considering snow retention or guards above entries and pedestrian areas.
Is an older Chicago home ready for a metal roof as it stands?
Many Chicago homes are older (median year built 1953; 58% built before 1960), so a roof replacement commonly requires deck inspection and possible full tear-off of existing layers. Structural upgrades depend on the specific roof framing and load capacity of the individual house.
Does a metal roof replacement need a permit in Chicago, Illinois?
Chicago lists an exception for qualifying repair, recover, or replacement on a residential pitched roof of at least 2:12 up to four stories, but says structural repairs and low-slope roof work require a permit[2]. Its Express Permit Program covers many reroof projects[1]. Confirm the final scope with the City.
Which Bishop's metal roofing system is better for a Chicago home?
Stone-Coated Steel Shingles are the option to investigate for a dimensional shingle-style metal appearance, while Standing Seam Metal Roofing is the option to investigate for long vertical-panel lines. Roof pitch, geometry, drainage, planned details, visual preferences, product instructions, and current availability should drive the property-specific recommendation.
Why does snow matter when choosing metal roofing in Chicago?
NWS Chicago lists a normal measurable-snow window at O’Hare from November 18 to April 2[3]. That does not predict snow load or performance for a home, but it makes edge drainage, valleys, wall transitions, entry areas, gutters, and any needed snow-management details appropriate subjects for a site-specific review.
Nearby
Communities near Chicago
References
Chicago permit and code sources
- Reroofing — City of Chicago
- Roofing Work — City of Chicago
- Snow Climatology for the NWS Chicago County Warning Area — NOAA National Weather Service Chicago, Illinois
- Roofing Contractor — Illinois Department of Financial and Professional Regulation
- Metal Roof Installation Manual — Metal Construction Association
- Stone-Coated vs. Standing Seam Metal Roofing — DECRA Metal Roofing
- U.S. Census Bureau QuickFacts: Chicago city, Illinois — U.S. Census Bureau
Consultation
Schedule your Chicago roofing consultation
Tell us about the house. We'll inspect the roof, recommend Stone-Coated Steel or Standing Seam for it, and put the scope, warranty and financing options in writing.