Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

The Beauty of Shingles. The Strength of Steel.

Stone-Coated Steel Shingles

Metal roofing doesn't have to look like metal panels. Stone-coated steel gives you the dimensional look of shingles, shake or tile, formed from steel and finished in bonded stone granules.

Quick answer

Stone-Coated Steel Shingles are steel roofing panels coated with bonded stone granules and formed to look like architectural shingles, shake or tile. Bishop's Metal Roofing installs them on pitched roofs of 3:12 or steeper across Missouri and Illinois, where they give a traditional appearance with a steel core, impact-rated options and a stated 50-year warranty.

Material
SteelMetallic-coated, stone-granule finish
Profiles
Shingle · Shake · TileManufacturer-dependent
Minimum slope
3:12IRC R905.4.2 metal roof shingles
Warranty
50-yearStated; written terms control
Stone-coated steel shingle roof in a weathered wood tone on a traditional brick home
01

What it is

What are stone-coated steel shingles made of?

A stone-coated steel panel starts as sheet steel with a protective metallic coating. The panel is pressed into a shingle, shake or tile shape, coated with an acrylic base, embedded with crushed stone granules and sealed with a clear overglaze[1][2]. The result reads like a familiar roof from the street while the substrate is steel.

Because each panel covers several square feet and interlocks with its neighbors, a stone-coated roof goes on as a system, not as individual shingles. Ridge, hip, valley and edge trim are made by the same manufacturer and finished to match, which is where most of the installation craft lives[3].

02

Best fit

Which homes are a good fit for stone-coated steel?

Stone-Coated Steel is the system we recommend most often for traditional Missouri and Illinois houses: ranches, colonials, Cape Cods, Tudors and brick two-stories with hips, valleys and dormers. Its smaller panel format follows complex roof geometry without the long, uninterrupted runs Standing Seam needs.

It also solves a common neighborhood problem. Many subdivisions and HOAs expect a shingle or shake appearance, and a stone-coated profile usually satisfies those design rules while giving the owner a steel roof. We still recommend getting architectural approval in writing before ordering.

  • Pitched roofs of 3:12 or steeper, the code minimum for metal roof shingles[4]
  • Complex roofs with hips, valleys, dormers and chimneys
  • Neighborhoods with shingle- or shake-look design standards
  • Owners who want a textured, traditional look rather than vertical seams
Close detail of stone-coated steel panels and ridge trim on a finished roof
03

Weather

How does stone-coated steel handle hail, wind and snow?

Hail is part of life in our two states: across the communities we serve, NOAA recorded hail of 1.75 inches or larger near most towns between 2016 and 2025[5]. Many stone-coated steel products are tested to UL 2218, the impact standard insurers reference, and carry its Class 4 rating, the highest class[2][6]. The granule finish also hides minor surface marks better than a smooth painted panel.

Wind performance depends on the fastening schedule and trim details in the manufacturer's installation instructions, so we install to those instructions rather than to habit[3]. In snow, the textured surface holds snow longer than a smooth panel, so it tends to release gradually; snow guards are still worth placing above entries and walkways.

04

Installation

How do we install a stone-coated steel roof?

Every project follows the same sequence so nothing is skipped when the weather turns or the schedule tightens.

  1. Tear-off and deck inspection

    Existing roofing comes off down to the deck. Soft, delaminated or gapped decking is replaced before anything new goes on.

  2. Underlayment and ice barrier

    Self-adhered ice-barrier membrane at eaves and valleys where the climate calls for it, then the manufacturer-approved underlayment over the field[4][7].

  3. Edge metal and valleys

    Drip edge, rake trim and valley metal set the water-shedding lines for the whole roof.

  4. Panels

    Panels are installed from the eave up, interlocked and fastened to the manufacturer's pattern for the profile and wind exposure[3].

  5. Ridge, hip and ventilation

    Ridge and hip trim close the roof, with balanced intake and exhaust ventilation planned with the attic.

  6. Walkthrough and documents

    A final inspection with you, clean-up, and the warranty and closeout documents.

05

Compare

Stone-coated steel or standing seam: what's the difference?

Both systems are steel roofs we stand behind. The choice comes down to the shape of the roof and how you want the house to look.

Stone-Coated Steel Shingles vs. Standing Seam Metal Roofing
FactorStone-Coated Steel ShinglesStanding Seam Metal Roofing
What it isFormed steel panels coated with bonded stone granules, shaped to look like shingles, shake or tileLong vertical steel panels joined by raised seams, with fasteners concealed under the seam
LookTraditional texture; reads like an architectural shingle or shake from the streetClean vertical lines; modern, farmhouse and lake-home styles
Best roof shapesPitched roofs with hips, valleys and dormersLong, simple planes, porches and lower-slope sections
Minimum slope (IRC)3:12 for metal roof shingles (R905.4.2)1/4:12 for standing seam systems (R905.10.2)
Snow behaviorGranule texture holds snow longer, so it slides less suddenlySmooth panels shed snow fast; plan snow retention above entries
HailMany products carry UL 2218 Class 4 impact ratings; granules mask minor dentsClass 4 ratings available on many panels; thicker gauges resist cosmetic dents better
HOA fitUsually approved where shingle appearance is requiredCheck architectural rules before ordering
06

Ownership

What maintenance does a stone-coated steel roof need?

Very little, but not none. Look at the roof after major hail or wind events and once a year from the ground. Keep gutters and valleys clear of leaves, keep tree limbs off the roof, and avoid pressure-washing the granule surface.

Some granule shedding in the first months is normal. If a panel is damaged by a falling limb, individual panels can be replaced. Walking on the roof should follow the manufacturer's guidance for where to step, so call us before other trades go up for satellite dishes, solar or chimney work.

FAQ

Stone-Coated Steel Shingles: common questions

Are stone-coated steel shingles the same as metal shingles?

Yes. Stone-Coated Steel Shingles are often called metal shingles or steel shingles. They are steel panels with a bonded stone finish, shaped like traditional shingles, shake or tile.

Can stone-coated steel go on a low-slope roof?

Not below 3:12. The International Residential Code sets 3:12 as the minimum slope for metal roof shingles, so low-slope porches and additions are usually better served by Standing Seam Metal Roofing.

Do stone-coated steel shingles dent in hail?

Large hail can mark any metal, but many stone-coated products carry a UL 2218 Class 4 impact rating and the granule texture hides minor marks. Ask to see the product's rating and how the warranty treats cosmetic damage.

Can you install stone-coated steel over my existing shingles?

Our standard is a full tear-off so the deck can be inspected and repaired. Covering old shingles hides rot and gaps that shorten the life of the new roof.

Is a stone-coated steel roof noisy in the rain?

Installed over a solid deck and underlayment with an insulated attic below, a stone-coated roof sounds much like any other roof. The granule surface also breaks up the sound of rain.

What warranty comes with stone-coated steel from Bishop's?

Bishop's states a 50-year warranty. The written warranty documents for your specific system define the coverage, issuer, conditions and claim process, and we provide them before you sign.

References

Sources

  1. Installation Guides — DECRA Metal Roofing
  2. Tilcor Stone Coated Steel Shingle — McElroy Metal
  3. Unified Steel Resource Library — Westlake Royal Building Products
  4. 2021 International Residential Code, Chapter 9: Roof Assemblies — International Code Council
  5. Storm Events Database — NOAA National Centers for Environmental Information
  6. Roof Guide: Codes & Standards — Insurance Institute for Business & Home Safety
  7. Preventing Roof Ice Dams — National Weather Service

Consultation

Schedule Your Roofing Consultation

We inspect the roof, recommend the system that fits, and put the scope, warranty and financing options in writing.

We use your details only to schedule your consultation. See our privacy policy.
Schedule consultation Call now