Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Planning a Metal Roof Replacement

How Does Metal Roofing Handle Hail? Missouri & Illinois Guide

Hail resistance is not a single metal-roof feature. Learn the difference between an impact rating, a visible dent, a puncture, and whole-system performance, then use a practical verification checklist before selecting a roof for a Missouri or Illinois home.

Quick answer

Metal roofing can offer meaningful resistance to hail but is not hail-proof; performance depends on the exact tested product and installed assembly. For Missouri and Illinois homes, ask for the product name, tested configuration and report, the test standard cited, and the current warranty wording before deciding.

Key takeaways

  • An impact rating measures a defined test outcome, not every hailstorm or cosmetic result.
  • A dent, a puncture, and a system-performance problem are different findings.
  • Panel profile, support, slope, and hail conditions can affect visible results.
  • Verify current documents for the exact product and assembly, not the metal-roof category.

What does an impact rating actually prove for hail?

Impact testing gives homeowners a useful starting point because it tests a stated material or assembly under repeatable conditions. In UL 2218, prepared roof coverings receive Class 1 through Class 4 ratings based on steel balls dropped from specified heights to replicate impact energies associated with natural hailstones. A higher class describes success under that test protocol; it does not establish how a roof will look after every real storm.[1]

UL says its historical certification approach evaluates physical breach damage viewed from the back of shingles, rather than visible denting or other aesthetic changes.[1] That explanation is about the scope of the test, not a finding about every metal product. When comparing metal roofs, treat an impact class as one piece of evidence and ask which exact product, thickness, profile, support condition, and assembly were actually tested.

What Hail-Related Evidence Can and Cannot Tell You
Evidence or observationWhat it can help establishWhat it cannot establish by itself
UL 2218 impact classificationThat a prepared roof covering met the listed steel-ball impact test classification.[1]A promise that every hailstorm will leave no dents or that every proposed installation is identical.
ANSI/FM 4473 resultThat a rigid roofing material met a stated simulated-hail test using freezer ice balls.[2]That it is directly comparable to a different standard, product, or tested assembly.
Visible dent or scuffThat there is a localized visible change worth documenting and evaluating.Whether the covering is punctured or the entire roof system has lost performance.[3]
Current product and installation recordsWhich profile, components, documents, and warranty language apply to the selected roof.A substitute for examining the actual project conditions or future weather events.

How are denting, punctures, and surface appearance different?

A dent is a change in the panel’s shape that can be visible in reflected light. A metal-roof manufacturer notes that roofing metals are malleable, so they can change shape under hail impact; it distinguishes denting from puncturing and describes denting as mainly an aesthetic issue in its general discussion.[3] That does not mean every visible mark has the same significance. The exact panel, its coating, the support below it, and the location of the mark still need to be considered.

A puncture is a breach through the material. That is fundamentally different from a shallow depression because it directly concerns the roof covering’s continuity. Surface scuffs, localized finish changes, and dents are also not interchangeable observations. Do not decide from a ground-level photo whether a panel has been punctured or whether an assembly is performing as intended. Record what is visible, preserve the product documents, and have an appropriate professional assess any suspected functional issue.[3]

Why does a roof system matter beyond the visible panel?

A roof is a coordinated system: field panels or shingles, deck or supporting structure, underlayment, trim, transitions, fasteners or clips, and penetrations all work together. This is why a panel claim should not be treated as a whole-roof claim. FM’s steep-slope approval framework addresses several attributes, including simulated wind, fire, and hail testing, while its hail test reference, ANSI/FM 4473, uses freezer ice balls.[2] The scope and method belong beside the result.

System thinking also prevents a common comparison mistake: assuming that every product sold under a familiar label has identical performance. The Metal Construction Association’s resilience discussion emphasizes that hazard resistance is not solved by one material alone and that assessment is necessary.[8] For a specific home, the relevant question is whether the proposed components and installation details match the current documents for the selected roofing system.

How do storm conditions and roof design change hail damage?

Hail is not a uniform projectile. The National Weather Service notes that storms producing quarter-size hail or larger can dent vehicles and damage roofs, and that large hail can fall at speeds greater than 100 mph.[4] Stone size is therefore only one part of the event. The impact angle, wind, location on the roof, and repeated strikes can differ across one property. An impact-test result should not be converted into a forecast of the exact appearance after an untested storm.

Design choices can influence how readily a mark is seen. In manufacturer technical guidance, metal thickness, roof slope, panel shape or striations, deck support, and finish are identified as variables that can affect denting or its visibility.[3] This is helpful decision context, not a product guarantee. Compare full-size samples, profile options, and the documented installation approach for the exact system rather than relying on a broad claim that all metal roofs handle hail the same way.

How should Midwest homeowners use hail season to prepare?

For homeowners across Missouri and Illinois, hail preparation begins with reliable weather information and safe timing, not an assumption that a roof can absorb any event. The National Weather Service defines a severe thunderstorm as one with hail at least one inch in diameter and/or wind gusts of at least 58 mph, and it advises monitoring warnings for the affected area.[4] When a warning is issued, prioritize people and pets and take shelter in a sturdy building; do not go outside to inspect a roof during the storm.[5]

Before severe-weather periods, take date-stamped ground-level photos of the roof elevations, gutters, downspouts, skylights, and rooftop equipment. Keep the final product name, color, panel or shingle profile, installation documents, test documentation, and warranty paperwork in one place. NOAA’s Storm Events Database is a public source of significant weather records, but it does not substitute for a project-specific roof assessment.[6] Good records make it easier to compare observations to the actual system later.

What should I photograph and document after a hailstorm?

Start from the ground after conditions are safe. The National Weather Service advises sheltering away from windows during a severe-thunderstorm warning and going into a sturdy building rather than a shed or under a tree.[5] Do not climb onto a wet, steep, obstructed, or otherwise unsafe roof to look for hail marks. Safety comes before documentation, and a close inspection should be arranged only when it can be performed safely.

Photograph each elevation in consistent light, then document visible dents or scuffs from more than one angle, gutters and downspouts, roof-mounted equipment, and any debris that can be seen from the ground. Write down the date, approximate time, and location. NWS storm reports can later include location, time, and hail size, while Storm Data and the NOAA database may not be available until 90 to 120 days after an event.[7] Those reports provide context; they do not determine the condition of a particular roof.

What verification steps should I take before choosing a metal roof?

Ask for documents before relying on a hail-resistance statement. The useful request is specific: the full product name, panel or shingle profile, substrate description, tested configuration, test standard, class or result, issuing organization, report or listing date, and the installation documents tied to the proposal. UL 2218 and ANSI/FM 4473 use different impact media—steel balls and freezer ice balls, respectively—so their results should be read within their own methods rather than treated as interchangeable labels.[1][2]

Bishop's Metal Roofing installs only Stone-Coated Steel Shingles and Standing Seam Metal Roofing on homes, serves all of Missouri and Illinois, offers financing, and provides a 50-year warranty. During a consultation, ask which of those two systems fits the roof geometry and visual goals, then verify the exact offered product or assembly’s current test report and current warranty wording. A 50-year warranty is an important business offering, but its current written terms—not a general article—control what it says for the selected system.

This article is general educational information, not a roof design, engineering, weather, safety, code, or warranty determination. Test standards, product documents, assemblies, roof conditions, and warranty wording can change. Verify current documents for the exact offered product and assembly before work begins.

FAQ

How Does Metal Roofing Handle Hail: common questions

Are metal roofs hail-proof?

No. Metal roofing can be impact resistant, but no responsible product comparison should call it hail-proof. A test result describes performance under a defined method, while a real storm varies in hail size, impact angle, wind, and strike location. The National Weather Service notes that quarter-size hail or larger can damage roofs, and large hail can fall at high speeds.[4] Verify the particular product and assembly instead of relying on the material category alone.

Does a Class 4 rating mean a metal roof will not dent?

No. UL 2218 classes are based on steel-ball impact energies, and UL explains that its historical evaluation focused on physical breach rather than cosmetic damage.[1] Class 4 is the highest class in that system, but it is not an appearance guarantee. Ask for the current report or listing for the exact proposed product, and separately discuss how its profile, thickness, finish, and support conditions may affect visible denting.[3]

Can hail dent a metal roof without puncturing it?

Yes. Denting and puncturing are different outcomes. A dent changes the surface shape; a puncture breaches the roof covering. Manufacturer technical guidance on metal roofing identifies both possibilities and notes that metal can change shape under impact.[3] A visible mark alone does not establish a puncture or whole-system failure. Document the observation and have a qualified professional examine suspected functional concerns using the selected system’s current instructions.

What should I ask to verify hail resistance before choosing a roof?

Request the exact product name, profile, tested configuration, test standard, rating or result, report or listing date, and the current installation documents. Also request the full current warranty wording for the offered product or assembly. UL 2218 uses steel balls, while ANSI/FM 4473 uses freezer ice balls, so confirm which standard a claim refers to.[1][2] This makes the conversation about documented evidence rather than a broad promise about metal roofing.

What should Missouri and Illinois homeowners photograph after a hailstorm?

Once conditions are safe, photograph roof elevations from the ground, gutters, downspouts, roof-mounted equipment, visible debris, and any suspected marks from multiple angles. Note the date, time, and location; do not climb onto an unsafe roof. The NWS advises taking shelter in a sturdy building during severe thunderstorms, and later NWS reports may include hail size, time, and location.[5][7] Photos and weather reports provide useful context, not a condition determination.

References

Sources

  1. UL Solutions, IBHS Drive Trust in Residential Roofing Shingles — UL Solutions
  2. FM Approvals Offers Steep-Slope Guidance — National Roofing Contractors Association, Professional Roofing
  3. Metal Roofing and Hail: How Hail Is Tested — Sheffield Metals
  4. Hail Safety Rules — NOAA National Weather Service
  5. During a Thunderstorm — NOAA National Weather Service
  6. Storm Events Database — NOAA National Centers for Environmental Information
  7. Storm Report Records — NOAA National Weather Service
  8. How Metal Is Shaping Resilient Building Design in a Climate of Crisis — Metal Construction Association

Built to last. Backed by Bishop's.

Make your next roof your last.

Two metal systems, one installation standard. In a consultation we inspect the roof, explain which system fits the house, and put the scope, warranty and financing options in writing.

Schedule consultation Call now