Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Roof Assembly & Detailing

Rainwater Harvesting From an Illinois Metal Roof: Questions About Collection and Use

An Illinois homeowner’s guide to collecting runoff from a metal roof, choosing rain barrels or cisterns, planning first-flush protection, and using stored water safely for landscapes.

Quick answer

Yes. An Illinois homeowner can collect runoff from a metal roof for limited nonpotable uses such as watering lawns and non-edible plants, but systems that constitute regulated plumbing must be built under the Illinois Plumbing Code by an Illinois licensed plumber and kept separate from potable supply.

Key takeaways

  • Illinois treats harvested rainwater as nonpotable; do not drink it or cross-connect it with potable plumbing[1][2].
  • Metal’s smooth surface can move water efficiently, but the collection system still needs screens, first-flush protection, and clean gutters[3][4].
  • Size storage around roof footprint, local rainfall, intended demand, and overflow—not the roof’s surface square footage[2][4].
  • Bishop's Metal Roofing is a residential metal-only specialist installing stone-coated steel shingles and standing seam metal roofing; the collection system itself should be planned with an appropriately licensed plumbing professional.

What nonpotable uses does Illinois allow for harvested rainwater?

Illinois approves harvested rainwater for onsite nonpotable applications. State summaries identify uses including lawn sprinkler systems, water closets and urinals, and fire-safety systems, with additional applications described through CSA B805/ICC 805 such as drip irrigation and vehicle washing[1]. University of Illinois Extension specifically advises that stored roof runoff should be used only on lawns and non-edible plants because water from surfaces may contain contaminants[2].

That distinction matters even when the roof is new and visibly clean. Dust, pollen, bird droppings, leaves, and material washed from the roof or gutter can enter the barrel. Illinois rules and guidance also depend on the end use, treatment level, plumbing design, and local approval.

Choosing a collection scale
ApproachBest-fit usePlanning needsMain caution
One barrelOccasional landscape watering[2]Base, screen, cover, overflow[2]Limited volume; winter shutdown[2]
Linked barrelsFrequent landscape wateringOverflow, cleaning, downspout capacity[3]More maintenance points[3]
Above-ground cisternLarger outdoor demandCatchment, foundation, pump, filter, overflow[3][4]Full tank needs strong support[4]
Indoor/high-contact reuseToilet flushing or regulated useLicensed plumber, code, treatment, backflow[1][3]Never connect to drinking water[1][2]

Why is a metal roof a practical catchment surface?

A metal roof is a reasonable platform for collection because its surface is generally smooth and nonporous. The Metal Roofing Alliance describes metal roofing as allowing water to flow readily toward gutters and as reducing the kind of granule shedding associated with some other roof materials[5]. DOE guidance likewise says smoother roof textures facilitate runoff, while roof type and pitch influence how much water is captured[3].

The roof finish, age, condition, fasteners, flashing, overhanging vegetation, and gutter cleanliness still matter. Bishop's Metal Roofing focuses on residential metal roofing rather than asphalt, tile, slate, cedar, membrane, or exposed-fastener panels on homes.

How does a basic metal-roof rainwater collection system work?

A simple system follows a predictable path: roof, gutter, downspout, screen, first-flush diverter, storage barrel or cistern, outlet, and overflow. DOE lists these as core components and also identifies pumps, controls, treatment, backflow prevention, and water-level indicators when a system is more complex[3]. A landscape-only barrel needs a sound catchment path, debris screen, cover, outlet, and foundation-safe overflow[2].

The container must sit on a level, stable base designed for a full tank. Water is heavy, and a larger cistern may need an engineered foundation or professional site review. Keep openings screened to limit insects, use an opaque or protected tank where appropriate to limit algae growth, and make overflow routes visible and maintainable. Never place a barrel where overflow can erode soil against the home, block a walkway, or discharge toward a neighboring property[2][4].

Why is first-flush protection important for roof runoff?

The first runoff after a dry period can carry accumulated dust, bird droppings, leaves, and other debris. Oklahoma State Extension explains that this initial flow often has higher contaminant concentrations and can be diverted before later runoff enters the storage tank[4]. A screen at the gutter inlet catches larger debris, while a first-flush diverter or roof washer addresses the early stream. They do not make roof runoff safe to drink.

Plan access for cleaning without walking on the roof. Inspect and clear screens, gutters, and the diverter after storms and long dry periods. DOE’s maintenance guidance calls for routine attention to collection surfaces, filters, first-flush devices, overflow, tanks, pumps, and backflow equipment[3].

How do I size a rain barrel or cistern for my roof?

Storage should match both supply and demand. DOE gives a planning formula: roof catchment area in square feet multiplied by rainfall in inches, collection efficiency, and 0.62 yields approximate gallons[3]. Use the roof’s horizontal footprint for planning rather than adding the sloped surface areas, and allow for losses from first flush, evaporation, splash, overflow, and leaks[4]. A larger roof does not automatically mean a larger barrel is worthwhile if the landscape uses little water or the overflow cannot be managed.

A 55-gallon barrel may be enough for occasional hand watering, while a cistern is more appropriate when the goal is repeated irrigation or multiple end uses. Compare seasonal rainfall with the weeks when irrigation demand occurs, and consider footprint, freeze protection, foundation, pump needs, and winter shutdown. Local rebates or reduced-price barrel programs may exist, but availability changes; check your city or water district rather than relying on an unverified savings estimate[2].

What Illinois plumbing rules, permits, and cross-connection protections apply?

Illinois requires rainwater harvesting collection and distribution systems to be used only for nonpotable purposes and constructed in accordance with the Illinois Plumbing Code by an Illinois licensed plumber based on the end use[1]. The EPA’s state summary also says plans and specifications may need approval before installation when storage exceeds 5,000 gallons, when the use is outside the referenced standard, or when higher-risk populations are involved[1]. Local authorities can add requirements, so confirm the current rule before buying equipment.

The most important safety boundary is separation from drinking-water plumbing. A rainwater pipe should never be casually tied into a potable line. DOE identifies backflow prevention as a system component where a makeup-water connection exists[3]. Ask the local building or plumbing department which permits, inspections, labeling, air gaps, backflow devices, and licensed trades apply to your proposed design.

How should roofing and rainwater system work be coordinated?

Rainwater harvesting works best when roofing, guttering, storage, and end use are considered together. During a metal-roof replacement conversation, identify which roof planes will feed the system, where downspouts can reach the tank, how overflow will drain, and whether gutter capacity and attachment need review. The roof contractor should not be expected to design regulated plumbing, and the plumber should not assume that every roof plane is suitable without examining the roofing system and manufacturer instructions.

Bishop's states that financing is available and states a 50-year warranty, but the current written offer and warranty control all terms[6].

What is a safe first project for collecting roof runoff?

Start with a modest, nonpotable landscape objective. Select a downspout that is convenient to the intended planting area, verify that the ground can support the full container, install a screened inlet and overflow, and keep the barrel covered. Use the water on lawns or non-edible plants, preferably through a controlled outlet or irrigation connection designed for that purpose. Illinois Extension recommends using stored water within three days when possible to discourage mosquitoes, or using an appropriate larvicide, and emptying or disconnecting barrels before freezing temperatures[2].

Before expanding to a buried tank, pump, toilet supply, sprinkler network, or any indoor use, obtain a written design from the relevant licensed professionals and confirm local approvals. Keep an inspection and cleaning schedule. If the roof is leaking, storm-damaged, or otherwise uncertain, do not access it yourself; arrange a professional roof inspection. Collection should complement a sound roof and drainage system.

This article provides general homeowner information, not a roof diagnosis, plumbing design, permit determination, legal advice, or financial advice. Illinois requirements and local rules can change; confirm the current requirements with the relevant authority and an Illinois licensed plumber. Do not drink roof runoff, create a potable cross-connection, or access an unsafe or unseen roof. Bishop's Metal Roofing facts are limited to the supplied business-fact manifest; current written contracts, offers, manufacturer instructions, and warranty documents control.

FAQ

Rainwater Harvesting From an Illinois Metal Roof: common questions

Is collecting rainwater from a metal roof legal in Illinois?

Illinois permits harvested rainwater for onsite nonpotable uses, but the system must follow the Illinois Plumbing Code and be installed by an Illinois licensed plumber when regulated plumbing work is involved[1]. The exact requirements depend on the end use, storage size, treatment, and local authority. A simple outdoor barrel is not the same as a cistern connected to toilets or sprinklers. Confirm current local requirements before installation, and do not interpret general online guidance as a permit decision or legal advice.

Can I use metal-roof runoff on vegetables?

University of Illinois Extension says stored water should be used only for lawns and non-edible plants because runoff from surfaces may contain contaminants[2]. A metal roof may provide a smooth collection surface, but that does not eliminate dust, droppings, or other contaminants[4][5]. Any higher-contact use would require a properly designed and treated system that meets the applicable Illinois requirements and referenced standards[1]. Use municipal or otherwise approved water for edible crops unless a qualified professional designs and verifies another approach.

Do I need a first-flush diverter on a metal roof?

It is a prudent part of most roof-runoff systems, especially after dry weather or where trees and birds contribute debris. The first runoff can contain more accumulated contaminants than later flow, and a diverter sends that initial water away from storage[4]. A gutter screen handles larger leaves and sticks, but it does not perform the same job. A diverter still needs regular cleaning and correct drainage. It improves collection quality for nonpotable use; it does not make the water potable[3][4].

How large should my rain barrel or cistern be?

Size it from the roof footprint, expected rainfall, collection efficiency, and the amount and timing of water your landscape uses. DOE’s planning formula estimates gallons from catchment area, rainfall, efficiency, and a 0.62 conversion factor[3]. Storage that is too small overflows often; storage that is too large may cost more, require a stronger foundation, and hold water longer than your demand justifies. Compare seasonal supply with irrigation demand, then confirm overflow, freeze protection, and local site constraints before selecting a tank[2][4].

Can Bishop's Metal Roofing design and connect my rainwater system?

Bishop's Metal Roofing’s documented specialty is residential metal-only roofing, with stone-coated steel shingles and standing seam metal roofing among its installed systems. The company can be part of a coordinated conversation about roof planes, gutters, and downspout locations, but regulated rainwater plumbing should be designed and connected by the appropriate licensed professional under Illinois requirements[1]. Bishop's states that financing is available and states a 50-year warranty; the current written offer and warranty control all terms[6]. No roofing company should promise drinking-water safety, code approval, or utility savings without system-specific documentation.

References

Sources

  1. Summary of Illinois’ Water Reuse Guideline or Regulation for Landscaping and Onsite Non-potable Water Reuse — U.S. Environmental Protection Agency
  2. Harvesting Rainwater — University of Illinois Extension
  3. Rainwater Harvesting Systems Technology Review — U.S. Department of Energy, Federal Energy Management Program
  4. Design of Rainwater Harvesting Systems in Oklahoma — Oklahoma State University Extension
  5. Rain Water Harvesting — Metal Roofing Alliance
  6. Business Fact Manifest — Bishop's Metal Roofing

Built to last. Backed by Bishop's.

Make your next roof your last.

Two metal systems, one installation standard. In a consultation we inspect the roof, explain which system fits the house, and put the scope, warranty and financing options in writing.

Schedule consultation Call now