Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Insurance, Permits & Documents

What Is a Metal Roof Submittal Package?

A metal roof submittal package gathers the product, installation, performance, and project documents needed to review one proposed roof system before materials are ordered or installed.

Quick answer

A metal roof submittal package is an organized set of documents showing the proposed roof system, how it will be installed, and the evidence supporting it. Typical contents include product data, installation instructions, shop drawings or samples, performance or evaluation reports, warranties, and jurisdiction-specific documents.

Key takeaways

  • A submittal package identifies the exact proposed roof system and its supporting documents, rather than describing metal roofing in general[1][2].
  • Product data, installation instructions, drawings, and performance evidence should agree on the profile, components, and conditions of use[3][4].
  • Local code officials and the authority having jurisdiction decide which permits and documents apply; model codes are adopted and modified by jurisdictions[5].
  • Bishop's Metal Roofing is a residential metal-only specialist serving incorporated communities in Missouri and Illinois, with stated systems of stone-coated steel shingles and standing seam metal roofing.

Why does a submittal package matter for a residential metal roof?

A submittal package turns a product conversation into a checkable roof-system record. Instead of saying only “metal roof,” it identifies the proposed profile, substrate, finish, fasteners, underlayment, trim, sealants, and installation method. A manufacturer’s resource library illustrates the range: product data sheets, product-information books, installation manuals, specifications, trim drawings, CAD files, warranties, and safety data sheets can all be relevant[1].

For a homeowner, the value is coordination. Roof panels are only one part of a weather-shedding assembly; a published metal-roof specification also addresses flashing, accessories, attachment hardware, sealants, underlayment, and related conditions[2]. Reviewing these items together can expose a profile mismatch, an omitted transition, or an instruction that does not apply to the selected system. It does not replace a permit review or an inspection, and it cannot certify an unseen roof.

Common parts of a metal roof submittal package
DocumentWhat it answersHomeowner check
Product data[1][2]What exact profile, material, finish, and accessories are proposed?Names and specifications match the contract.
Installation instructions[1][2][3]How does the manufacturer direct installation and detailing?Manual is current and applies to the selected system.
Shop drawings or details[2]How will this roof fit the actual geometry and transitions?Project details show edges, penetrations, and changes.
Evaluation or test report[4][5]What criteria were evaluated, and under which conditions?Scope and conditions of use fit the proposed assembly.
Warranty and care documents[1][2]What written terms and maintenance instructions apply?Read exclusions, start date, issuer, and required steps.

What core documents should a metal roof submittal include?

Start with product data for the exact system. Useful fields may include the product or model name, panel or shingle profile, base-metal information, thickness or gauge where published, seam or interlock description, finish, dimensions, compatible accessories, and limitations. A metal-roof master specification calls for detailed product literature describing the profile, material, gauge, seam height, panel spacing, finish, and sealant, along with the manufacturer’s installation guidelines[2]. Those details let the reviewer distinguish one assembly from a generic brochure.

Installation instructions explain the manufacturer’s approved sequence and details. They may cover layout, clips or fasteners, laps or seams, closures, flashing, underlayment, penetrations, storage, and field conditions. MCA describes its installation manual as covering storage, sealants, fasteners, accessories, reroofing, retrofit considerations, code-related requirements, and final inspection tools[3]. The package should use the current instructions for the selected product, not an old manual for a similar-looking panel.

When are shop drawings, details, and samples required?

Shop drawings are project-specific visual documents when the job requires them. They can show roof geometry, panel direction, edge conditions, valleys, hips, ridges, eaves, rakes, penetrations, transitions, and attachment or flashing details. A master specification distinguishes shop drawings from product data and requires complete drawings before production, with quality-control documentation tied to the specified performance criteria[2]. For a straightforward residential replacement, the contractor or jurisdiction may not require the same drawing set used on a larger project; the governing request controls.

Samples and color information answer a different question: what will the selected finish and profile look like? The cited specification calls for a sample of each roof-panel type and additional color information when a custom color is proposed[2]. Treat each document as evidence for one purpose, and confirm that the package labels it with the same product name and finish used in the proposal.

What performance reports and code evidence belong in the package?

A compliance document should identify the product or assembly, the criteria evaluated, installation guidance, and any conditions of use. ICC-ES explains that an Evaluation Report presents findings, conclusions, and recommendations from a technical evaluation, identifies the code provisions or acceptance criteria used, and includes product identification, installation guidelines, and conditions of use[4].

Roofing standards are not all interchangeable. NRCA distinguishes testing standards, rating standards, and design standards, while noting that codes are adopted by state or local governments and may reference industry standards[5]. A technical package may therefore contain test reports, an evaluation report, a design or load table, or a manufacturer certification, but each item answers a different question. Do not turn one documented test result into a blanket promise about wind, hail, fire, water, energy use, or insurance.

How does local review affect a submittal package?

The authority having jurisdiction, often a local building department, determines the permit path and documents it will review. NRCA notes that jurisdictions adopt model codes and may modify energy-code requirements, and it directs project teams to verify the applicable code with the government agency having jurisdiction[5]. That means a package prepared for one city or code edition may need additions or revisions for another location, even when the roof product is unchanged.

Ask who is responsible for submitting the permit materials and which code edition, amendments, design criteria, and forms apply. A jurisdiction-specific evaluation supplement can help where available; ICC-ES says supplement reports address additional state and local requirements and can streamline approval across jurisdictions[4]. Approval is a decision by the reviewing authority, not a manufacturer brochure or a contractor’s informal assurance.

How should a homeowner review a metal roof submittal package?

Before signing off on a proposal, compare the package with the written scope. Confirm the roof type and profile, finish, accessories, underlayment, flashing approach, penetrations, ventilation coordination, and any tear-off or deck-repair assumptions. Then check that the product data and installation manual identify the same system. Manufacturer resources show why this cross-check matters: downloads are often separated by product, trim, installation, specification, submittal, warranty, and safety-data categories[1]. Missing information is a reason to ask a question, not a reason to guess.

Keep the final package with the contract, permit records, installation instructions, color selection, and warranty documents. Ask for revisions when the selected product changes, when a detail is field-modified, or when the jurisdiction requests additional evidence. The goal is a coherent record of what was proposed and installed. It is not a substitute for a qualified inspection, and homeowners should not climb onto a roof to verify details themselves.

What documents will Bishop's Metal Roofing provide and clarify?

For a homeowner requesting a submittal package, the useful conversation is system-specific: identify the proposed Bishop's system, request the current manufacturer and project documents that apply, and compare them with the local jurisdiction’s requirements. Bishop's states that financing is available and that it states a 50-year warranty, while its manifest says the actual written offer and current written warranty control all terms. Do not infer coverage, approval, price, rate, or performance beyond those written documents.

This article provides general educational information, not a permit decision, engineering opinion, legal advice, financial advice, roof diagnosis, or guarantee of performance, coverage, approval, insurance treatment, or project outcome. Requirements vary by product, roof, code edition, and authority having jurisdiction. Review current written documents and consult the appropriate qualified professionals. Bishop's written proposal, financing offer, and warranty control their respective terms.

FAQ

What Is a Metal Roof Submittal Package: common questions

Is a submittal package the same as a roofing estimate?

No. An estimate or proposal describes price, scope, and commercial terms. A submittal package documents the proposed roof system and the evidence used to review it. It may include product data, installation instructions, drawings, samples, and compliance reports[1][2]. The two should agree on profile, accessories, and installation assumptions, but they serve different purposes. Ask for clarification if the estimate names one product while the technical documents identify another.

Do homeowners always need shop drawings for a metal roof?

The required level of documentation depends on the project, roof geometry, contractor, and authority having jurisdiction. A metal-roof specification may require complete shop drawings before production[2], while a residential permit review may request a different set of forms or details. Ask the local building department and the contractor what is required. Do not assume that a generic manufacturer detail is a project-specific shop drawing.

Can a manufacturer report guarantee my roof will qualify in my city?

No. An evaluation or test report has a defined scope, criteria, and conditions of use. ICC-ES says reports identify the evaluated provisions, product, installation guidance, and conditions[4]. Local jurisdictions adopt and sometimes modify model codes, so the authority having jurisdiction decides what it will accept[5]. A report can support review, but it is not a universal approval or a guarantee of a particular roof’s outcome.

What should I compare when reviewing two submittal packages?

Compare the exact system name, profile, material, finish, accessories, underlayment, flashing, attachment method, installation manual, and evidence scope. Check whether each package addresses the same roof geometry and site conditions. Manufacturer libraries commonly separate product data, drawings, specifications, installation manuals, warranties, and safety data[1].

Will Bishop's Metal Roofing provide every document in a package?

The documents needed depend on the selected Bishop's system, manufacturer, project, and local review. Bishop's identifies its work as residential metal-only roofing and lists stone-coated steel shingles and standing seam metal roofing among its installed systems. Request the current, system-specific documents that apply to your proposal and jurisdiction. Bishop's states that its written warranty controls warranty terms, and its written financing offer controls financing terms; do not rely on summaries instead of those documents.

References

Sources

  1. Downloadable Metal Roofing & Siding Resources — McElroy Metal
  2. Section 07 41 13 Metal Roofing Master Specification — Dimensional Metals, Inc.
  3. Metal Roof Installation Manual — Metal Construction Association
  4. Evaluation Report Program — ICC Evaluation Service
  5. Codes and Standards — National Roofing Contractors Association

Built to last. Backed by Bishop's.

Make your next roof your last.

Two metal systems, one installation standard. In a consultation we inspect the roof, explain which system fits the house, and put the scope, warranty and financing options in writing.

Schedule consultation Call now