Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Planning a Metal Roof Replacement

Metal Roof vs Asphalt Shingles: Missouri & Illinois Guide

Replacing an aging asphalt roof is a long-view decision. Compare metal roofing and asphalt shingles through Midwest weather exposure, maintenance, appearance, roof complexity, and ownership plans, then use a practical quote checklist to document the scope before choosing a system.

Quick answer

Choose metal roofing when you plan to own the home for years, prefer its appearance and maintenance profile, and evaluate the full roof assembly. Asphalt shingles are sensible when their look, replacement approach, and expected ownership horizon align with the house, confirmed by written scope and weather-aware detailing.

Key takeaways

  • Match the roof category to your ownership horizon and priorities, not a single headline claim.
  • Treat Midwest storm exposure as a reason to scrutinize attachment and detailing, not as a guarantee.
  • Complex valleys, transitions, and low-slope areas deserve a system-specific written scope.
  • Document material, deck findings, flashings, ventilation, cleanup, and warranty information before signing.

How should I start the roof replacement decision?

An aging asphalt roof creates a category decision before it creates a product decision. Ask how long you expect to own the home, how much visible change you welcome, and whether you prefer a roof system that calls for a different maintenance routine. A metal roof is a roof covering made from formed metal components; asphalt shingles are overlapping units with an asphalt-based weathering surface. Neither label tells the full story of how a specific installation will perform.

Start with the conditions that can be observed now: shingle wear, stains inside the home, flashing condition, drainage paths, attic access, and the number of penetrations and transitions. After a storm, avoid treating a surface impression as a complete diagnosis. University of Missouri Extension notes that adjusters may examine missing shingle granules, dents in metal vents, and bruise-like dark spots in shingles, while insurance standards can differ.[3] Record what you see and have the roof assessed before deciding on a replacement scope.

Metal Roofing vs. Asphalt Shingles: Questions That Clarify the Fit
Decision factorMetal roofingAsphalt shinglesWhat to document in the quote
Ownership horizonConsider whether the long-term look and maintenance approach fit your plans.Consider whether the familiar material and future replacement approach fit your plans.Named system, written warranty documents, maintenance guidance, and assumptions.
Storm exposureReview attachment, edge, flashing, and penetration details for the selected system.Review shingle, underlayment, flashing, edge, and attachment details.Deck inspection process, condition documentation, and specific weather-exposed details.
AppearanceEvaluate profile, finish, roof edges, and transitions from the street and at close range.Evaluate color, texture, ridge treatment, and relationship to the home’s architecture.Product name, color, profile, sample approval, and accessory appearance.
Complex roof geometryDetail valleys, walls, penetrations, and pitch changes for the chosen metal system.Detail valleys, walls, penetrations, and pitch changes for the shingle assembly.Location-specific flashing, drainage, access, and unknown-condition plan.
Ongoing carePlan periodic observation and system-specific maintenance.Plan periodic observation and shingle-system maintenance.Owner maintenance responsibilities and recommended inspection intervals.

How do metal roofs and shingles differ in look and upkeep?

Asphalt shingles are familiar to many homeowners and can preserve a conventional shingle appearance. Metal roofing changes the visual language of the house and may suit an owner seeking crisp lines or a shingle-like metal profile. Appearance should be judged from the street, at roof edges, and around additions, not from a small sample alone. View proposed colors and profiles in daylight, and consider how they relate to siding, masonry, gutters, and nearby roofs.

Each category has its own installation sequence, accessories, repair considerations, and care needs. Metal should not be described as maintenance-free, and a shingle roof should not be assumed to need the same attention at every stage of its service life. Ask the contractor to define the inspection and maintenance recommendations for the proposed assembly, including penetrations, sealants, flashings, gutters, debris, and any areas where water tends to collect.

How should Missouri/Illinois weather shape my roof questions?

Weather exposure is a local condition, not a material guarantee. National Weather Service event reviews document large hail, damaging straight-line winds, and tornadoes across portions of Missouri and Illinois.[1] That history makes it reasonable to ask how a replacement design handles wind uplift pathways, debris exposure, drainage, and vulnerable intersections. It does not establish that any roof covering will prevent damage in every storm.

FEMA calls the roof a home’s first line of defense in a high-wind event and recommends attention to loose shingles and the connection between roof framing and walls.[2] For a replacement quote, ask what the installer will inspect once the old covering is removed, how deck concerns will be documented, and which attachment, flashing, and edge details are included.

How do roof shape and drainage set the project scope?

A simple gable roof and a roof with many valleys, dormers, skylights, chimneys, walls, and changes in pitch do not present the same detailing task. It does mean that a proposal should identify where the covering meets other building parts and how water will be guided away from those transitions. A small line item that simply says flashing may not explain enough.

Walk the property with the estimator and point out prior leaks, ponding or overflow, ice buildup, difficult access, and areas shaded by trees. Include gutters, downspouts, valley outlets, and wall-to-roof connections in the conversation. FEMA advises keeping gutters and downspouts secure and maintaining exterior conditions that can reduce wind-related damage.[2] The right scope is the one that makes the water-management plan visible for this particular roof; unknown concealed conditions should be identified as unknown rather than promised away.

What maintenance and comfort outcomes should I expect?

From the ground, watch for debris, displaced components, open-looking flashings, backed-up gutters, and changes after severe weather. Arrange professional inspection when there is a concern instead of walking a steep or damaged roof yourself. Maintain a dated photo record before and after storms, because it can help distinguish a new condition from ordinary weathering.[3]

Roof color and coating can affect surface temperature, but neither material category supports a universal comfort or energy outcome. ENERGY STAR explains that cool-roof performance depends on solar reflectance and thermal emittance, with lighter or reflective surfaces generally staying cooler in sun.[4] The Department of Energy adds that climate, insulation, roof type, and heating and cooling equipment affect the outcome; in colder conditions, reduced winter heat gain can also matter.[5] Ask for the actual product ratings rather than expecting a blanket result.

Which metal systems does Bishop’s install and how should I choose?

Once metal roofing is the preferred category, the conversation can narrow to the systems Bishop's Metal Roofing installs: Stone-Coated Steel Shingles and Standing Seam Metal Roofing. The choice should follow the home’s architecture, roof shape, desired appearance, drainage details, and the manufacturer’s instructions for the selected system. It should not be made from a generic claim that one metal profile solves every roof challenge.

Ask to see how the chosen system will terminate at ridges, eaves, valleys, walls, chimneys, skylights, and vents. Have the proposal name the specific material and accessory approach, then review how those elements coordinate with the existing roof deck and attic conditions. Bishop's Metal Roofing serves all of Missouri and Illinois, offers financing, and provides a 50-year warranty.

What should a comparable written roofing quote include?

A useful proposal lets you compare scope rather than trying to infer it from a material name. Ask for the roof areas included, material system, removal or overlay approach if applicable, deck inspection process, underlayment, edge treatment, flashing locations, ventilation-related work, drainage components, penetrations, cleanup, and how discovered conditions will be documented. For each item, identify what is included, what is excluded, and what requires approval if found after work begins.

Also ask who will perform the work, how the site will be protected, what access is needed, and what maintenance documentation the manufacturer requests. Make storm-related questions specific: What areas will be checked after removal? How will existing damage be photographed? Which parts of the scope respond to wind or water exposure, and what risks remain outside the contractor’s control? FEMA emphasizes that mitigation measures need to be tailored to the individual home.[2] A clear written answer is more useful than an absolute promise.

What evidence should guide my next roofing step?

Bring photos, the approximate age of the existing roof if known, records of past repairs, and notes on leaks or storm events to a consultation. Ask the estimator to separate observed conditions from recommendations and to explain any assumptions. If hail damage is part of the decision, keep the assessment process factual. Missouri Extension advises that an experienced roofer and the insurance adjuster can review visible damage together, while the insurer determines its own standards.[3] Do not assume a repair or replacement outcome before that review.

For a homeowner choosing between metal roofing and asphalt shingles, the strongest decision is usually the one that aligns the roof category with ownership plans, appearance, complexity, upkeep expectations, and verified site conditions. Bishop's Metal Roofing can discuss Stone-Coated Steel Shingles or Standing Seam Metal Roofing for homes throughout Missouri and Illinois. Before authorizing work, make sure the written scope, product information, financing discussion, and warranty documents answer the questions that matter for your house.

How do asphalt shingles and Stone‑Coated Steel Shingles differ?

Asphalt shingles use glass-felt reinforcement, asphalt coatings and weather-side mineral granules. ASTM D3462/D3462M evaluates manufactured products before installation; it does not establish in-service performance after application.[6] Architectural products add a laminated, dimensional look, but published ratings vary by product line.[7]

Stone-Coated Steel Shingles are formed steel panels surfaced with stone granules in an acrylic base coat. A representative profile uses concealed fasteners and interlocking panels to imitate shingles, shakes or tile.[8] It can suit an owner wanting dimensional texture instead of standing seam’s long vertical lines. Review the actual profile, color, trim and roof shape; a sample does not confirm the finished look.

What weather and impact documents should I request?

Louis records document large-hail and damaging-wind events affecting Missouri and Illinois, including central/northeast Missouri and west-central Illinois.[1] This is regional context, not a loss prediction for an address or a claim that any roof performs identically in every storm.

Request current fire, wind and impact documentation and applicable installation instructions. UL 2218 assigns Classes 1 through 4 from steel-ball impact energies, but does not account for every observable effect, such as denting or granule loss.[9] A Class 4 label for a specified product is a classification—not a hail-proof, damage-proof or insurance-coverage promise.

Why does installation scope decide much of the result?

A written scope should address deck observations, removal or overlay, underlayment, valleys, penetrations, flashings, ventilation, edge metal, accessories and cleanup. NRCA describes metal roofing as panels and shingles, but that category description is not project-specific detailing.[7]

Pitch, intersections, skylights, chimneys, gutters, existing layers and deck condition can change feasibility and cost. Concealed fastening is a feature of some stone-coated systems; it depends on current instructions and correctly integrated accessories.[8] Confirm local permit, code and manufacturer requirements.

This guide is general educational information, not a diagnosis, engineering opinion, insurance determination, code interpretation, or warranty statement. Roof conditions and requirements vary by property.

FAQ

Metal Roof vs Asphalt Shingles: common questions

Is a metal roof always better than asphalt shingles?

No. A metal roof may suit an owner who prefers its appearance and maintenance profile and expects to keep the home for years, but it is not automatically the best answer for every roof. Asphalt shingles can also be an appropriate category choice. The deciding evidence is the home’s roof shape, drainage, condition, storm exposure, ownership plans, and written scope. FEMA notes that wind-mitigation measures must be tailored to the individual home, which is a useful principle for any replacement decision.[2]

Should severe weather change how I compare roof materials in Missouri and Illinois?

Yes, but it should change the questions more than it should produce a guarantee. National Weather Service reviews show that parts of Missouri and Illinois have experienced large hail, damaging winds, and tornadoes.[1] Ask each contractor to identify the roof’s exposed edges, penetrations, valleys, flashings, and deck-inspection process. Then ask what the selected system is designed to address and what remains uncertain in a severe event.

Will metal roofing make my home more comfortable in summer?

It may affect roof-surface temperature depending on the product’s reflectance and emittance, but a comfort result cannot be predicted from the word metal alone. ENERGY STAR explains that cool roofs reflect sunlight and release heat, while lighter or reflective surfaces generally stay cooler.[4] The Department of Energy says climate, insulation, roof type, and heating and cooling equipment also affect the outcome, and cooler roofs can reduce useful winter heat gain in colder conditions.[5] Review actual product ratings and the whole home.

Can a complex roof use metal roofing?

Often, yes, but complexity makes design and documentation more important. Valleys, dormers, skylights, chimneys, walls, and changes in slope create places where water management and transitions need specific attention. Ask whether the proposed system is appropriate for each roof area and request a location-by-location flashing and drainage plan. FEMA recommends consulting appropriate construction professionals and local officials when making property changes, because measures must suit the individual building.[2] Do not accept a generic scope for a complicated roof.

What should I document before requesting a replacement quote?

Gather dated ground-level photos, notes on leaks or staining, previous repair records, the roof’s approximate age if known, and observations after storms. Include close photos of gutters, downspouts, vents, and obvious shingle conditions only when they can be taken safely. University of Missouri Extension identifies missing granules, dented metal vents, and bruise-like dark shingle spots as items that may be examined after hail.[3] Ask each estimator to document observed conditions separately from recommendations and assumptions.

Are Stone-Coated Steel Shingles the same thing as asphalt shingles?

No. Conventional asphalt shingles use a glass-felt reinforcement, asphalt coatings and mineral granules, while Stone-Coated Steel Shingles are steel panels surfaced with stone granules.[6][8] They may share a shingle-like appearance, but their construction, fastening approach, accessories and installation instructions are different. Compare the specified product documents rather than appearance alone.

Are metal shingles better for Missouri and Illinois hail?

They may be worth evaluating in this regional weather context, but ‘better’ needs an exact product and assembly comparison. NWS event records document large hail and damaging winds across parts of Missouri and Illinois.[1] Request current impact and wind documentation, then remember that an impact classification is not a promise against dents, cosmetic effects, damage or insurance claims.[9]

Does a Class 4 rating mean a roof is hail-proof?

No. UL 2218 uses four classifications based on steel-ball impact energies, but UL explains that the certification does not account for every observed outcome, including denting or granule loss.[9] Confirm whether the exact proposed product carries the claimed classification, follow the manufacturer’s assembly requirements, and avoid treating a rating as a guarantee.

References

Sources

  1. Significant Weather Event Reviews — National Weather Service St. Louis, Missouri
  2. Protect Your Property From Severe Winds — Federal Emergency Management Agency
  3. Call Insurance Adjuster To Determine Hail Damage — University of Missouri Extension
  4. Cool Roofs — ENERGY STAR
  5. Purchasing Energy-Efficient Cool Roof Products — U.S. Department of Energy, Federal Energy Management Program
  6. Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules — ASTM International
  7. Roofing Materials — National Roofing Contractors Association
  8. Tilcor Stone Coated Steel Shingle — McElroy Metal
  9. UL Solutions, IBHS Drive Trust in Residential Roofing Shingles — UL Solutions

Built to last. Backed by Bishop's.

Make your next roof your last.

Two metal systems, one installation standard. In a consultation we inspect the roof, explain which system fits the house, and put the scope, warranty and financing options in writing.

Schedule consultation Call now