Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Insurance, Permits & Documents

Questions to Ask Your Insurer Before Signing a Metal Roof Replacement Contract

Before signing a metal roof replacement contract, ask your insurer what is covered, which deductible applies, how payment works, and what documentation is required. This practical Missouri and Illinois guide helps you coordinate the claim without making promises your policy does not support.

Quick answer

Before signing, ask the insurer to confirm in writing whether the loss is covered, whether settlement is ACV or RCV, which deductible applies, what inspections or documentation are required before permanent repairs, how code work is handled, and how claim funds will be paid to you and your mortgage servicer.

Key takeaways

  • Confirm coverage, ACV or RCV settlement method, exclusions, and the exact deductible before you sign[1][3].
  • Ask whether the adjuster must inspect the roof and approve the scope before permanent work begins[3].
  • Request written answers about code upgrades, metal-roof materials, decking, flashing, ventilation, and supplements[2][5].
  • Keep the contract, estimate, photos, receipts, claim correspondence, and mortgage-servicer instructions together[3][4].

What coverage decision should I get from my insurer first?

Ask: “Is this roof loss covered under my policy, and what event does the claim recognize?” Have the insurer identify whether wind, hail, falling objects, water intrusion, or another peril is involved, and ask about exclusions, wear-and-tear language, prior damage, and any roof-age limitation. The Insurance Information Institute recommends asking whether damage is covered, how long you have to file, and whether the loss exceeds the deductible[3]. Coverage questions belong with your insurer or agent; a roofer can document observed conditions but cannot decide what the policy pays.

Ask for the claim number, assigned adjuster, inspection date, required forms, and the insurer’s deadline for your response. Do not treat a preliminary phone estimate as final authorization. Keep a dated record of every call and save emails, letters, photos, videos, and receipts. The III advises retaining copies of submissions and recording the names and phone numbers of people involved[3].

Questions to ask before signing
TopicAsk the insurerKeep in your file
CoverageWhat peril and roof damage are covered?[1][3]Claim number and written determination
SettlementIs payment ACV, RCV, or both?[1][4]Policy language and depreciation rules
DeductibleWhich deductible applies and how is it calculated?[1][3]Dollar or percentage calculation
ScopeWhat estimate, inspection, code, and supplement steps are required?[3][5]Adjuster scope and line-item metal estimate
PaymentHow will lender-held funds be released?[4]Servicer draw instructions and receipts

How do ACV, RCV, and my deductible affect payment?

Ask: “Is my roof settlement based on actual cash value (ACV), replacement cost value (RCV), or a combination?” ACV generally accounts for depreciation, while RCV is intended to pay the cost to repair or replace with similar materials and quality, subject to policy terms and limits[1][4]. Ask when withheld depreciation can be recovered, what deadline applies, and whether the insurer requires completed work or invoices before releasing it. Do not assume a contractor’s estimate equals your recoverable settlement.

Ask: “What deductible applies to this loss—standard, wind, hail, roof-specific, or percentage-based?” NAIC notes that some policies use special deductibles for wind or hail and that deductibles may apply specifically to a roof[1]. Request the exact calculation and ask whether temporary repairs count toward the total settlement. A deductible is your policy responsibility; never sign an arrangement that inaccurately represents who paid it or that promises the insurer a different amount.

What documentation does the insurer require before permanent work?

Ask: “Must an adjuster inspect the roof before I authorize replacement, and do you require a line-item estimate, proof of loss, or contractor documentation?” The III advises homeowners not to make extensive permanent repairs until the adjuster has assessed damage and recommends written, detailed bids[3]. If emergency protection is needed, ask what temporary work is allowed, what receipts to keep, and how to prevent further damage without destroying evidence.

Ask whether the carrier will accept a metal-roof estimate that identifies profile, manufacturer, underlayment, flashings, edge metal, ventilation, decking allowances, tear-off, disposal, labor, permits, and cleanup. If the adjuster’s scope omits an observed item, request the reason in writing and ask how to submit photos or a supplement. The goal is a documented comparison between the claim scope and the proposed contract—not an assumption that every requested upgrade is covered.

Will my policy cover a metal upgrade or only like-kind replacement?

Ask: “What roof material and quality does my policy authorize, and how will you handle a change from the existing covering to metal?” Replacement-cost coverage commonly addresses repair or replacement with similar materials or quality, while more expensive improvements may be treated differently[3][4]. Ask whether you must pay the difference for a voluntary upgrade, how that difference will be shown, and whether the insurer needs a signed change order. Get the answer before signing a contract whose price assumes insurance will fund the entire upgrade.

Ask the insurer to review a metal-specific scope rather than a generic “roof replacement” allowance. Your written contract should identify the selected system, and the insurer should state which portion is claim-related and which portion is owner-selected.

Does ordinance-or-law coverage pay for code-required roof work?

Ask: “If current code requires additional underlayment, ice barrier, flashing, ventilation, structural work, or other measures, does my policy include ordinance-or-law coverage?” The Insurance Information Institute explains that code compliance can add cost and is generally not covered unless an endorsement provides for it[3]. Because Missouri and Illinois requirements can vary by adopted local code and project conditions, ask the insurer and permitting authority which rules apply to your address; do not rely on a statewide assumption.

Ask how the carrier wants code items documented and whether a permit, code citation, or contractor explanation is required. The 2024 International Residential Code addresses underlayment for metal roof shingles and metal roof panels, ice barriers in areas with ice-dam history, and roof-replacement and roof-recover conditions[5]. Those provisions are useful scope questions, not a determination of your local jurisdiction’s adopted code or your policy’s payment.

Who controls claim payment and timing with my mortgage servicer?

Ask: “How will claim funds be paid, and what does my mortgage servicer require?” The Consumer Financial Protection Bureau says settlement checks are generally made out to the homeowner and mortgage servicer or lender; servicers commonly release funds in stages as work progresses[4]. Ask about endorsement, escrow, inspections, draw schedules, required invoices, and how long each release normally takes. Build those steps into the contract’s payment schedule instead of promising a date the lender controls.

Ask whether the insurer permits assignment or direction-to-pay forms and what safeguards apply. The III cautions homeowners to be completely satisfied that repair work is completed before signing forms that allow a firm to be paid directly[3]. Keep ownership of your claim correspondence, verify every payee, and avoid signing blank or incomplete documents. If claim and lender instructions conflict, pause and obtain written clarification from the responsible institution.

What documents should I assemble before signing the contract?

Before contract signing, assemble the declarations page, relevant endorsements, claim number, adjuster scope, photos and videos, inspection reports, written estimates, permit information, and your questions and answers. Ask the insurer whether it needs pre-loss photos, maintenance records, invoices for temporary repairs, or proof-of-loss forms. The III recommends photographs or video, written bids with line-item materials and prices, and copies of all documents exchanged[3]. Do not discard damaged materials before the adjuster has had a reasonable opportunity to inspect them.

Give the contractor only the records needed to produce a clear scope, and give the insurer the contract and estimate it requests. Separate three numbers: the insurer’s covered amount, your deductible, and the price of any owner-selected upgrade. If hidden decking damage or code work appears after tear-off, require a written change order and ask the insurer how to document a supplemental request before authorizing extra work.

Can I get a written insurer decision before I sign the contract?

Your final questions should be: “What exactly is approved, what is denied or pending, what deadline applies, and what would change the amount?” Request a revised scope or written explanation when the estimate does not match the observed damage. A contract can be valid even when coverage remains disputed, so read cancellation, contingency, deposit, change-order, warranty, and dispute terms carefully.

Its business information states that financing is available and that a 50-year warranty is stated, but the actual written offer and current warranty control all terms. Sign only when the scope makes sense independently of an unconfirmed insurance outcome.

This article is general educational information, not legal, financial, insurance-adjusting, engineering, or building-code advice. Coverage, deductibles, deadlines, claim procedures, permits, and payment decisions depend on your policy, insurer, mortgage documents, and local jurisdiction. Ask your insurer, permitting authority, and qualified advisers for advice about your situation. Bishop's Metal Roofing business facts are stated separately from general evidence; its current written contract, warranty, financing offer, and the insurer’s written determination control.

FAQ

Common questions about this topic

Can my insurer choose my roofing contractor?

Ask the insurer whether it has a preferred or managed-repair program, but also ask whether you may select your own contractor. The III states that the choice of repair firms is yours, while noting that some insurers may recommend firms or guarantee work through programs that are not available everywhere[3]. Compare the policy, claim correspondence, and program terms. Bishop's Metal Roofing is a residential metal-only specialist; confirm that the proposed system and scope are acceptable to you before authorizing work.

Should I sign a roof contract before the claim is approved?

Do not sign based on a verbal promise that insurance will pay. Ask your insurer what must happen first: inspection, estimate approval, proof of loss, or another step[3]. If you review a contract early, make sure it clearly addresses cancellation, deposits, insurance contingency language, change orders, and your responsibility for uncovered upgrades. A contractor can help document a scope, but only the policy and insurer’s written determination establish coverage.

Will insurance pay for a metal roof if I currently have shingles?

Not automatically. Ask how the policy treats replacement with a different material and whether payment is limited to like kind and quality. The III explains that replacement-cost coverage generally addresses similar materials and that more expensive code or design changes may require ordinance-or-law coverage or owner payment[3]. Give the adjuster a metal-specific estimate and request a written breakdown of covered work, deductible, depreciation, and any upgrade difference before signing.

What if the adjuster’s estimate is lower than the metal-roof contract?

Ask the adjuster to identify each difference and provide the process for submitting a supplement. Give the insurer a detailed, line-item estimate, photos, manufacturer information, permit or code documentation, and any concealed-condition evidence when available. The III recommends detailed written bids and keeping copies of claim records[3]. Do not assume the difference is covered, and do not authorize unpriced work. Separate legitimate scope corrections from voluntary upgrades and keep both in writing.

How does a mortgage affect my roof claim payment?

A mortgage servicer is commonly named on a structural insurance check, and funds may be released in stages as work progresses[4]. Ask the insurer how the check will be made payable, then ask the servicer about endorsement, escrow, inspections, draw timing, required invoices, and final release. Put those requirements into your project schedule. Continue following your mortgage terms, and do not treat a claim payment as permission to stop making loan payments; the CFPB says homeowners remain responsible for mortgage payments while a claim is paid out[4].

References

Sources

  1. Rebuilding After a Storm: Know the Difference Between Replacement Cost and Actual Cash Value When It Comes to Your Roof — National Association of Insurance Commissioners
  2. Settling Insurance Claims After a Disaster — Insurance Information Institute
  3. How do home insurance companies pay out claims? — Consumer Financial Protection Bureau
  4. Disasters — Illinois Department of Insurance
  5. 2024 International Residential Code, Chapter 9: Roof Assemblies — International Code Council
  6. Shopping Tips and Information — Illinois Department of Insurance

Built to last. Backed by Bishop's.

Make your next roof your last.

Two metal systems, one installation standard. In a consultation we inspect the roof, explain which system fits the house, and put the scope, warranty and financing options in writing.

Schedule consultation Call now