Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Planning a Metal Roof Replacement

Questions Homeowners Should Ask About Metal Roof Underlayment

Before signing a metal-roof proposal, ask what underlayment is specified, where it goes, how it is attached, and how the details fit your slope, deck, climate, and metal system.

Quick answer

Ask for the underlayment’s exact product name, applicable standard, coverage map, slope and deck assumptions, attachment method, enhanced membrane locations, compatibility with the metal system, manufacturer installation instructions, how deck repairs and substitutions are handled, and what completion documentation and warranty you’ll receive.

Key takeaways

  • Get the exact underlayment product, standard, and manufacturer instructions in writing[1][3].
  • Confirm where self-adhered or ice-dam membrane is included, especially at eaves, valleys, transitions, and penetrations[2].
  • Compare slope, deck, laps, attachment, compatibility, and substitution language—not vague material labels[1][2].
  • Treat Bishop's scope and current written warranty as controlling documents; do not assume unseen conditions or storm outcomes.

What is underlayment’s role under a metal roof?

Underlayment is the water-shedding layer between the roof deck and the metal covering. Metal panels and shingles are designed to shed water, not function as a single, uninterrupted waterproof membrane; the underlayment is a secondary line of defense beneath seams, laps, penetrations, and other details[1][2]. Ask the contractor to explain exactly what the proposed product does, where it will be installed, and how it works with the selected metal system.

In a Missouri or Illinois reroof, the answer should distinguish the roof covering from the complete assembly. A sound proposal identifies the deck, underlayment, metal profile, flashings, ventilation work, and fasteners rather than treating “metal roof” as one product.

Underlayment proposal details to compare
Ask forWhy it mattersWhat a clear answer includes
Product and standard[1][3]Confirms the material is approved for the assemblyManufacturer, product name, standard, data sheet
Coverage and membrane zones[2][4]Shows where secondary protection is providedFull deck or marked eaves, valleys, transitions, penetrations
Slope and deck assumptions[1][2]Requirements can change with conditionsMeasured slope, substrate, tear-off or recover plan
Attachment and compatibility[2][3]Reduces movement and corrosion riskFasteners, laps, sealants, approved contacts
Change and completion recordsMakes the promise verifiableSubstitution process, photos, warranty documents

Which underlayment product and standard are you proposing?

Ask for the underlayment’s exact manufacturer, product name, type, thickness or weight where applicable, and published installation instructions. Do not settle for “premium synthetic” or “ice-and-water shield” without a product identification. The 2024 International Building Code lists recognized underlayment standards for metal roof panels on solid or closely fitted decks, while also providing an exception for structural metal panels that do not require a substrate or underlayment[1]. Your local code official and the panel manufacturer determine what applies to your home.

Ask whether the product is asphalt-saturated felt, synthetic/polymer underlayment, self-adhered modified bitumen, or a combination. MBCI notes that synthetic products can be viable for metal panels when the panel manufacturer permits them, and that the installation must follow manufacturer instructions[3]. Request the technical data sheet and the standard or evaluation information cited in the proposal so you can compare like with like.

Where will enhanced self-adhered protection be used?

Ask whether self-adhered membrane is planned at eaves, valleys, sidewalls, headwalls, roof-to-wall transitions, penetrations, and other vulnerable areas. NRCA describes ice-dam protection at downslope perimeters, transitions, valleys, and around penetrations as a consideration in cold regions and where local code requires it[2]. That is especially relevant to homeowners planning for freeze-thaw weather in the Midwest, but the exact locations should be drawn or written rather than assumed.

Also ask whether the proposal includes full-deck coverage, limited-area membranes, or a sealed-deck strategy—and why. FEMA explains that a sealed roof deck can provide additional protection if the primary covering is damaged or lost in high winds, but its guidance is not a promise that every roof or underlayment arrangement will perform identically[4]. The contractor should explain compatibility, ventilation implications, and any limits of the proposed detail.

How will laps, fasteners, and vulnerable details be handled?

A useful comparison asks how laps, end laps, fasteners, perimeter edges, valleys, and penetrations will be handled. Code tables and manufacturer instructions can vary with roof covering, slope, wind exposure, and product; MBCI’s summary, for example, describes different lap and attachment approaches by slope and notes corrosion-resistant cap fasteners for certain applications[3].

Ask how the installer will keep the underlayment secure before panels are installed and how exposed material will be protected from tearing, wrinkling, or prolonged weather. McElroy Metal’s roofing manual is an example of manufacturer-led technical documentation: the relevant panel system’s instructions should govern sequencing and details[5]. A homeowner does not need to climb onto the roof; request marked-up drawings, photos taken by the crew, or a completion checklist instead.

What slope, deck, and existing-roof assumptions are included?

Ask what roof slope and deck condition the proposal assumes. NRCA’s metal-shingle guidance recommends different underlayment quantities by slope and notes that lower-slope applications need enhanced underlayments and careful consideration of climate and accumulation conditions[2]. A proposal that omits slope or simply says “standard underlayment” leaves an important design question unanswered.

Ask whether the project is a tear-off, a recover, or an installation over a batten or purlin arrangement, and whether the deck will be opened for inspection. Underlayment requirements can change with the substrate and the metal profile. The contractor should identify how damaged or unsuitable sheathing is handled, including whether repairs are included, documented as an allowance, or priced only after exposure; never assume a concealed condition is covered without written language.

Which materials contact the metal and how is movement addressed?

Metal expands and contracts as temperatures change, and adjacent materials can create corrosion or adhesion problems if they are incompatible. NRCA advises using fasteners compatible with the base metal to reduce galvanic corrosion and says fastener service life should meet or exceed the expected service life of the secured metal[2]. Ask which fasteners, tapes, sealants, primers, and membranes contact the roof metal, and whether each is approved for that system.

For metal shingles or shingle panels, ask whether a slip sheet or other separation layer is specified. NRCA explains that a slip sheet can protect the underlayment from movement and help prevent metal from sticking to the primary underlayment[2]. This is not a universal instruction for every standing-seam assembly; the correct answer depends on the selected manufacturer’s details. The proposal should name the assembly rather than blend instructions from unrelated systems.

What documentation and completion records will I receive?

Ask the contractor to attach product data sheets, installation instructions, roof-area diagrams, and a written list of included and excluded details. The proposal should state the underlayment product, coverage areas, membrane locations, fastening or adhesion method, deck assumptions, and who supplies each component. It should also identify how substitutions are approved. This turns a broad promise into something you can compare with another proposal.

Finally, ask what documentation you receive at completion: photographs, permit or inspection records where applicable, product registration instructions, and the final warranty documents. Bishop's business facts state that the company installs metal-only systems on homes and states a 50-year warranty, but the current written warranty controls all terms.

This article is general educational information, not a roof diagnosis, code determination, legal advice, or financial advice. Local requirements and manufacturer instructions control. Do not access a roof; ask a qualified professional to evaluate site-specific conditions. Bishop's written proposal and current written warranty control its services and terms.

FAQ

Common questions about this topic

Is underlayment required under every metal roof?

Many metal roof assemblies over solid or closely fitted decks require underlayment under applicable building-code provisions, while structural metal panels may fall under a stated exception[1]. The answer depends on the panel or shingle type, substrate, slope, jurisdiction, and manufacturer instructions. Do not assume that a roof-over, purlin system, or specialty structural panel follows the same rules as residential metal panels installed over sheathing.

Is synthetic underlayment better than felt?

Neither label alone proves that one option is better for your house. MBCI notes that synthetic or polymer-based underlayments can be viable for metal panels when the panel manufacturer permits them[3]. Compare the approved product, standard, attachment method, slope application, membrane details, and compatibility—not just the material name. The best choice is the one specified for the complete roof assembly, installed according to the current product and metal-system instructions.

Should ice-and-water membrane cover the whole roof?

Not automatically. Enhanced self-adhered membrane is commonly discussed for eaves, valleys, transitions, and penetrations in cold regions or where code requires it[2]. Full-deck systems can provide a different kind of secondary protection, but they may affect air and vapor movement and must be compatible with the roof design[3]. Ask the contractor to show the exact coverage on a diagram and explain ventilation, adhesion, laps, and manufacturer approval before accepting an upgrade.

What underlayment details belong in a metal-roof proposal?

At minimum, look for the product name, applicable standard, coverage area, membrane locations, slope assumptions, lap and edge treatment, attachment method, deck assumptions, and substitution procedure. Also ask who handles concealed deck repairs and what completion records you receive. Code provisions and manufacturer instructions can differ by metal system and conditions[1][3], so a proposal should identify the assembly rather than use a generic phrase such as “install underlayment per standard practice.”

Can underlayment prevent every roof leak?

No. Underlayment is a secondary water-shedding layer, not a substitute for correct metal panels, flashing, penetrations, slope, fastening, and maintenance[2]. FEMA describes a sealed roof deck as additional protection when a primary covering is damaged, not as an unconditional promise of leak-free performance[4]. Ask what the proposed underlayment is designed to do and what exclusions apply. A contractor cannot responsibly diagnose an unseen roof or promise a particular storm outcome without evaluating the assembly.

References

Sources

  1. 2024 International Building Code, Section 1507.1.1 — International Code Council
  2. Mad About Metal — National Roofing Contractors Association
  3. Metal Roof Underlayment Requirements & Attachment — MBCI
  4. Improving Windstorm and Tornado Resilience: Recommendations for One- and Two-Family Residential Structures — Federal Emergency Management Agency
  5. Metal Construction Association Roofing Installation Manual — McElroy Metal / Metal Construction Association
  6. Building America Best Practices Series: Volume 5 — U.S. Department of Energy

Built to last. Backed by Bishop's.

Make your next roof your last.

Two metal systems, one installation standard. In a consultation we inspect the roof, explain which system fits the house, and put the scope, warranty and financing options in writing.

Schedule consultation Call now