Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Stone-Coated Steel Shingles

How Should Moss Be Removed From a Stone-Coated Steel Roof in the Midwest?

For Missouri and Illinois homeowners, moss removal starts with safety, gentle cleaning, and product compatibility. Learn when simple prevention is enough and when a metal-roof specialist should inspect the roof.

Quick answer

Remove moss from a stone-coated steel roof with a gentle, manufacturer-approved cleaner and a soft rinse rather than pressure washing; avoid copper- or iron-based treatments on DECRA roofs. Reduce shade and debris to limit recurrence, and get a metal-roof professional if the coating is damaged or access is unsafe.

Key takeaways

  • Treat moss as a moisture-and-shade problem. North-facing slopes, overhanging branches, debris, and slow drainage can keep a roof damp[4].
  • Never use a pressure washer or forceful scrubbing on a stone-coated surface; both can dislodge protective granules[1][2].
  • Product instructions control. DECRA specifically prohibits copper- and iron-based moss treatments and limits water pressure to 500 psi[1].
  • Roof access is hazardous. If the surface is slippery, steep, damaged, or unfamiliar, arrange a professional evaluation instead of climbing[2][3].

Why does moss grow on Midwest roofs?

Moss needs persistent moisture and tends to favor shaded roof planes. The Asphalt Roofing Manufacturers Association identifies north-facing slopes, overhanging branches, and roof debris as common conditions that keep surfaces damp and support growth[4]. Missouri’s humid summers, Illinois rain and snow cycles, and shaded urban or wooded lots can create those conditions, but a roof’s actual exposure matters more than a state line. Moss is different from flat black algae streaks; it forms a thicker, plant-like mat that can hold moisture against the surface.

Stone-coated steel is not the same as an asphalt shingle, so an asphalt-cleaning recipe should not automatically be transferred to it. The coating’s stone granules are part of the finished surface. DECRA’s technical guidance says forceful removal can strip granules, and it rejects copper- or iron-based treatments for its roofs[1]. Identify the roof product, read its current care instructions, and treat any manufacturer-specific direction as the controlling instruction before selecting a cleaner.

Moss-removal choices for a stone-coated steel roof
ApproachUse it?Why
Ground-level observation and preventionYesReduces exposure without roof-access risk; shade and debris control discourage growth[2][3].
Manufacturer-approved non-corrosive treatmentSometimesUse only when the roof documentation and product label agree; protect landscaping and runoff[1].
Gentle rinseSometimesA rinse can remove loosened material, but it should not blast granules[1].
Pressure washing, wire brushing, or scrapingNoForce can remove stone coating and shorten surface life[1][2].
Copper- or iron-based treatmentNo for DECRA; verify other systemsDECRA warns of corrosion from copper and rust staining from iron[1].

How do I evaluate moss from the ground?

From the ground, look for green or brown growth on shaded slopes, leaf mats behind roof features, overflowing gutters, and branches touching or hovering over the roof. Binoculars or a camera with a zoom lens can help without putting a homeowner on the roof. Also check interior ceilings and attic-access areas for signs that warrant prompt attention, such as water staining or daylight around penetrations; moss alone does not establish the cause of a leak.

Do not diagnose an unseen roof or assume every dark patch is moss. A qualified roofer should evaluate loose or missing shingles, exposed metal, damaged flashing, rust staining, blocked drainage, and any area where the coating appears disturbed. The Metal Roofing Alliance emphasizes that roof maintenance should prioritize safety and recommends professional evaluation when trouble spots or needed repairs are possible[3].

What is a compatible, gentle cleaning method?

For a product that permits cleaning, select a non-corrosive moss or algae product and follow its label for dilution, dwell time, rinsing, vegetation protection, and disposal. DECRA lists several compatible products but notes that the list is not comprehensive; the important principle is compatibility with the roof and surrounding landscape, not a one-size-fits-all chemical[1]. OSU Extension recommends physical removal with a brush or broom for roof moss, while warning that high pressure can degrade a roof’s granular layer[2]. On a stone-coated roof, that advice means gentle—not aggressive—action.

Water should be a rinse, not the main force that tears growth from the surface. DECRA says not to exceed 500 pounds per square inch for its roofs, to avoid forceful granule removal, and not to exceed 160°F when heated water or steam equipment is used[1]. A garden-hose rinse may be appropriate when the product instructions allow it. Never improvise with a pressure washer, wire brush, scraper, solvent, or abrasive pad. Protect siding, plants, pets, and collection systems from runoff according to the product label.

Why avoid copper, iron, and unverified treatments?

Copper strips and copper-containing treatments are often suggested for moss, but DECRA warns that copper can accelerate corrosion through a galvanic reaction with its roof panels. It also warns that iron-based products can rust-stain the roof[1]. The safe rule is to verify the roof manufacturer and use only a treatment documented as compatible with that system.

Do not copy an asphalt-shingle recipe simply because it appears in a general roofing article. ARMA describes a bleach-and-water approach for asphalt systems and separately warns against pressure washing asphalt shingles[4][5]. A stone-coated steel roof may have different coating, runoff, fastener, and warranty considerations. If the roof’s documentation is missing, ask a metal-roofing professional to identify the system before applying anything stronger than gentle water and approved cleaner.

How can I prevent moss from returning?

After cleaning, prevention focuses on shade, debris, and water. Trim branches that block sunlight or drop leaves, while using an arborist when tree work is near utility lines or beyond safe homeowner reach. Remove loose debris with a non-abrasive method directed down the slope only when it can be done safely from the ground or by a professional. OSU Extension identifies more sunlight and less incidental moisture as practical ways to discourage moss[2].

Keep gutters and downspouts clear so water can leave the roof system. The Metal Roofing Alliance calls gutter maintenance essential for proper drainage and recommends trimming trees to reduce debris and winter damage[3]. Prevention will not eliminate moss spores or guarantee a moss-free roof, especially on a shaded north slope. It can, however, reduce the damp, debris-rich conditions that allow growth to return quickly.

When should a professional handle moss removal?

A professional evaluation is the prudent choice when moss is extensive, the surface is steep or slippery, access requires roof travel, or the coating appears loose or missing. It is also appropriate after a storm, when flashing or penetrations may be compromised, or when water is entering the home. A cleaning contractor who regularly works on asphalt roofs may not be familiar with stone-coated steel; ask what products, pressure limits, fall protection, and manufacturer instructions they will use.

What is a practical care sequence for Missouri and Illinois roofs?

A sensible sequence is: observe from the ground; identify the roof manufacturer and profile; photograph growth and drainage areas; clear nearby gutters only where safely reachable; trim or schedule trimming of overhanging branches; then obtain a qualified evaluation before treatment. If a compatible cleaner is approved, protect landscaping and follow its label. Schedule work for stable weather, because rain, ice, wind, and wet growth increase slip risk and make runoff harder to control.

Recheck shaded slopes after the next wet season and after major storms. Keep records of the product used, date, photographs, and any professional recommendations. If moss returns rapidly, ask whether a drainage, tree-shade, flashing, ventilation, or coating issue is contributing. The goal is not cosmetic perfection at any cost; it is to preserve the roof surface, manage moisture, and address real defects before they become leaks[1][2][3].

This article provides general homeowner information, not a roof diagnosis, engineering opinion, legal advice, or financial advice. Follow the current roof and cleaner manufacturer instructions. Roof access and chemical handling can be hazardous; use qualified professionals when conditions are unsafe or the roof system is uncertain. Bishop's written warranty, financing, and service terms control any project.

FAQ

Common questions about this topic

Can I pressure-wash moss off a stone-coated steel roof?

No. Pressure washing can dislodge the roof’s stone coating, and OSU Extension warns that high-pressure devices degrade granular roof surfaces[2]. DECRA says water pressure on its roofs should not exceed 500 psi and should be used as a gentle rinse rather than the primary removal method[1]. Because brands and roof conditions differ, do not treat 500 psi as a universal homeowner target. If growth requires force to remove, stop and arrange a metal-roof professional evaluation instead of increasing pressure.

Are copper strips safe for a stone-coated steel roof?

Not automatically. DECRA specifically says not to use copper-based products or solutions on its roofs because dissimilar-metal galvanic reaction can accelerate corrosion; it also warns that iron-based products can rust-stain the surface[1]. Other manufacturers may publish different instructions, but a generic internet recommendation cannot replace the roof system’s care guide. Identify the product first and obtain written compatibility guidance before installing strips or applying a moss treatment.

Can I remove moss myself from a roof in Missouri or Illinois?

A homeowner can often manage ground-level prevention, such as trimming accessible vegetation through appropriate means and keeping reachable gutters clear. Roof cleaning itself is a safety decision, not just a maintenance task. OSU Extension notes that moss makes a roof slippery and recommends considering professional help[2]. The Metal Roofing Alliance likewise places safety first and advises professional evaluation when roof trouble spots or maintenance needs are present[3]. Do not climb an unfamiliar, wet, steep, or damaged roof.

Will moss damage a stone-coated steel roof?

Moss should be addressed, but visible growth alone does not prove that the steel substrate or roof deck is damaged. Moss retains moisture and can conceal loose coating, debris, flashing problems, or drainage defects. ARMA documents how moss can contribute to problems on asphalt systems, while stone-coated steel requires its own product-specific assessment[4]. Have a qualified metal-roof professional inspect persistent or heavy growth, especially when there are stains, leaks, rust, loose shingles, or disturbed granules.

How can I keep moss from coming back?

Reduce the conditions moss prefers: shade, trapped debris, and persistent moisture. OSU Extension recommends increasing sunlight and restricting extra moisture where practical[2]. The Metal Roofing Alliance recommends trimming overhanging trees and keeping gutters clean for drainage[3]. Keep branches away from the roof, remove debris with a non-abrasive method when safe, and watch shaded slopes after wet seasons. These steps reduce recurrence; they do not guarantee a moss-free roof. Rapid return deserves an inspection for drainage or roof-system issues.

References

Sources

  1. Cleaning A DECRA Roof — DECRA Metal Roofing
  2. How to remove moss from my roof? — Oregon State University Extension Service
  3. 7 Steps to Get Your Roof Winter Ready — Metal Roofing Alliance
  4. 3 Tips to Clean a DECRA Metal Roof From Algae, Lichen, and Mold — DECRA Metal Roofing
  5. Algae & Moss Prevention and Cleaning for Asphalt Roofing Systems — Asphalt Roofing Manufacturers Association

Built to last. Backed by Bishop's.

Make your next roof your last.

Two metal systems, one installation standard. In a consultation we inspect the roof, explain which system fits the house, and put the scope, warranty and financing options in writing.

Schedule consultation Call now