Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Stone-Coated Steel Shingles

What Are Stone-Coated Steel Shingles Made Of?

Stone-coated steel shingles combine a formed steel core, corrosion-resistant metallic coating, bonding layers, and colored stone granules. This guide explains what each layer does and why the complete roof system matters.

Quick answer

Stone-coated steel shingles are built from a profiled steel core protected by a corrosion-resistant metallic coating, factory-applied primers or acrylic resin that bond mineral stone granules, and often finished with a clear sealer. Each layer provides structural support, corrosion resistance, adhesion, and a weather-facing finish.

Key takeaways

  • The core is formed steel, while a zinc-aluminum-silicon metallic coating helps protect it from corrosion[1].
  • Acrylic or polymer bonding layers hold the stone granules to the prepared metal surface; the granules are not the structural part of the shingle[1][2].
  • Stone coating changes appearance and surface texture, but it does not make every product identical: gauges, profiles, coatings, fasteners, and installation details vary by manufacturer[2][3].
  • A durable roof is a system. Underlayment, flashing, attachment, ventilation, and compatible accessories matter alongside the shingle material[3][4].

What is the steel core made of?

The load-carrying foundation of a stone-coated steel shingle is a profiled sheet of structural-quality steel. A manufacturer forms or stamps the sheet into a shingle, shake, or tile-inspired shape before the decorative finish is completed. That core gives the panel its rigidity and lets a relatively thin covering span between attachment points while remaining light compared with many traditional tile products[1][2].

Steel is not, by itself, the whole answer to weather exposure. Bare steel can corrode when water and oxygen reach it, so roofing steel is normally protected by a metallic coating and additional finish layers. Product data should identify the substrate and relevant coating specifications rather than relying on the broad label “metal shingle.” The exact steel grade, thickness, profile, and forming method are product-specific[1][2].

What each layer contributes
Layer or componentTypical roleWhat to verify
Formed steel core[1]Structural strength and panel shapeSteel grade, thickness, profile
Aluminum-zinc-silicon metallic coating[1]Corrosion protection beneath the finishCoating specification and product data
Primer/acrylic bonding layer[1][2]Adheres granules and supports the finishApproved finish and curing details
Mineral stone granules[1][2]Color, texture, and surface appearanceGranule finish, color, and care instructions
Clear sealer or overglaze[1][2]Additional surface protectionWhether the product includes one and its maintenance guidance
Underlayment, flashing, fasteners[3][5]Completes the water-shedding roof systemCurrent installation guide and local code

What metallic coating protects the steel?

Many stone-coated steel products use a hot-dip aluminum-zinc alloy coating that also contains silicon. DECRA describes this coating as a bonded protective layer over the steel, while its manufacturing explanation identifies silicon as part of the corrosion-resistance and bonding system[1]. In practical terms, this metallic layer separates the steel substrate from much of the moisture and oxygen that would otherwise accelerate corrosion.

It is a thin, engineered metallic layer beneath the primers and granules. Its performance depends on the complete assembly, including cut edges, penetrations, compatible accessories, drainage, and installation. For that reason, a product’s published technical documentation is more useful than assuming every stone-coated shingle has identical coating weights or chemistry[1][3].

How do primers and acrylic resin work?

After metallic coating, manufacturers prepare the surface so the next layers adhere consistently. The Metal Roofing Alliance explains that stone-coated panels are specially primed, coated with an acrylic polymer adhesive, and then covered with granular stone; it also describes a clear coat sealer as a final protective step[2]. DECRA similarly identifies acrylic resin coatings as a bonding surface and an added barrier against weathering[1].

This bonding layer is why the granules should not be thought of as loose gravel sprinkled over a roof. They are factory-applied to an engineered adhesive or resin surface and cured as part of the product’s finish. The resin also helps isolate the metallic coating from handling and ultraviolet exposure, although the precise formulation, thickness, and curing process vary among brands. A sample or color name cannot reveal those construction details; ask for the current product data sheet[1][2].

What do stone granules provide?

The visible surface consists of mineral granules selected for size, texture, and appearance. Manufacturers can use pigments or colored coatings on the granules to create blended colors and profiles that resemble asphalt shingles, wood shakes, or clay tile. The stone layer is therefore primarily a finish and visual surface, not the structural skeleton of the shingle[1][2].

The granules can also change how a metal roof looks from the ground by breaking up reflections and adding texture. IBHS notes that stone-coated metal roofs have a textured stone coating that can mask the appearance of dents after hail impacts[4]. Hail behavior depends on the product, impact conditions, and the complete roof system[4].

Why is a clear sealer added?

Many systems add a clear overglaze or sealer above the granules. The Metal Roofing Alliance identifies the clear coat as extra protection, and DECRA describes a protective overglaze and final curing stage[1][2]. This top layer helps hold the finish together and contributes to resistance against weathering, but it should not be confused with the underlying metallic corrosion coating or with a field-applied paint job.

Aggressive chemicals, abrasive tools, or incompatible touch-up materials can damage a coating even when the steel below remains sound. Homeowners should retain the product name, installation guide, color, and warranty documents so a future inspection or repair can be matched to the original system[2][3].

How does a stone-coated shingle fit into the full roof system?

A stone-coated shingle sheds water as part of a larger assembly. The roof deck supports the covering; underlayment provides a secondary water-shedding layer; flashings manage transitions and penetrations; fasteners or interlocks attach panels; and ventilation and edge details influence moisture management. Installation manuals specify how these elements work together. The Florida Building Code approval documentation, for example, addresses deck, underlayment, slope, and fastening requirements for a stone-coated roof product[3].

That is why two shingles made with similar ingredients can perform differently in service. A concealed or protected fastening layout, engineered interlocks, correct overlap, and properly detailed valleys and penetrations affect water resistance. McElroy Metal’s Tilcor description highlights concealed fastening and interlocking panels as system features, not as properties of the stone granules alone[5]. A contractor should explain the complete assembly and identify which details are manufacturer requirements versus local code requirements.

How should homeowners evaluate product construction?

For a homeowner comparing products, start with documentation rather than marketing shorthand. Ask for the product data sheet, installation guide, substrate and coating description, profile dimensions, approved accessories, and any evaluation reports that apply to the intended installation. Confirm the required minimum slope, underlayment, fastener type, flashing approach, and whether the manufacturer permits the proposed reroofing method[3][5].

Then separate material questions from project questions. “What is it made of?” concerns the steel, metallic coating, bonding resin, granules, and sealer. “Will it work on my house?” concerns roof geometry, deck condition, drainage, penetrations, ventilation, local code, and workmanship. Bishop's Metal Roofing focuses on residential metal-only roofing and installs stone-coated steel shingles and standing seam metal roofing in incorporated communities across Missouri and Illinois; the written scope and selected manufacturer documents should control any specific project details.

This educational article explains common stone-coated steel shingle construction at the system level. Products and codes vary. Do not infer the condition of an unseen roof from this article, and do not walk on a roof or attempt repairs without appropriate professional guidance. Current manufacturer instructions, applicable local code, and the written project scope control. Bishop's Metal Roofing’s written warranty, financing offer, and any project-specific terms control over general statements here.

FAQ

What Are Stone-Coated Steel Shingles Made Of: common questions

Are stone-coated steel shingles made of stone or steel?

They are steel shingles with a stone-based surface finish. The formed steel sheet supplies the structural core, while the metallic coating, primer or acrylic resin, granules, and sometimes a clear sealer build the protective and decorative surface[1][2]. The exact substrate thickness, coating chemistry, granule treatment, and sealer vary by manufacturer, so the product data sheet—not the name alone—should answer questions about a specific line[1][3].

What is the coating under the stone granules?

A typical system uses a corrosion-resistant metallic coating over the steel, followed by primers or an acrylic polymer bonding layer that holds the granules. DECRA identifies an aluminum-zinc-silicon coating and acrylic resin layers; the Metal Roofing Alliance describes a specially primed panel, acrylic adhesive, granular stone, and clear sealer[1][2]. Products differ, so ask for the manufacturer’s current construction description and installation documentation before assuming a particular alloy, thickness, or finish sequence[3].

Do the stone granules make the shingles stronger?

The steel core supplies the primary structural strength. Granules contribute texture, color, and a protective surface, but they do not turn a light-gauge panel into a solid stone roof[1][2]. IBHS reports that textured stone coating can mask the appearance of dents on stone-coated metal after hail, while also explaining that metal roofs can dent under impact[4]. Actual resistance depends on product design, attachment, support, impact conditions, and any applicable test documentation[4][5].

Is underlayment part of a stone-coated steel shingle?

No. Underlayment is a separate roof-system component installed beneath the shingles, usually over the roof deck. It can provide secondary water-shedding protection, while flashings, fasteners, interlocks, and ventilation address other system needs. Installation manuals and local code establish the required type and application; the Florida Building Code documentation illustrates that deck, slope, underlayment, and attachment requirements must be considered together[3]. A quote should identify these components instead of treating the visible shingle as the entire roof.

Can I compare two products by looking only at the granule color?

No. Color is only one visible finish choice. Compare the steel substrate, metallic coating, profile, bonding system, granule finish, sealer, attachment method, approved accessories, slope limits, underlayment, and published installation requirements[1][2][3]. Concealed fastening and interlocking panels, for example, are system features that can affect detailing and water management[5]. A qualified contractor should connect the selected product’s documents to your roof’s geometry and local requirements rather than making a decision from a sample alone.

References

Sources

  1. How Is DECRA Metal Roofing Made? — DECRA Metal Roofing by IKO
  2. Metal Roof Performance: How to Finish Strong — Metal Roofing Alliance / Build Using Steel
  3. Stone Coated Steel Roofing Tiles Installation Manual — Florida Building Commission
  4. Natural Weathering and Hazard Exposure — Insurance Institute for Business & Home Safety
  5. Tilcor Stone Coated Steel Shingle — McElroy Metal

Built to last. Backed by Bishop's.

Make your next roof your last.

Two metal systems, one installation standard. In a consultation we inspect the roof, explain which system fits the house, and put the scope, warranty and financing options in writing.

Schedule consultation Call now