Insurance, Permits & Documents
What Underlayment Documentation to Retain for an Illinois Metal Roof Warranty File
A complete underlayment file helps Illinois homeowners connect the product, roof assembly, installation instructions, local requirements, and warranty terms long after the crew leaves.
Keep the underlayment’s exact commercial name, technical data sheet, package label or lot information, the underlayment and metal-panel installation instructions, approved assembly/detail drawings, pre‑concealment photos, permit/inspection records when applicable, the signed contract and completion record, maintenance notes, and all warranty documents.
Key takeaways
- Record the exact underlayment brand, product, standard designation, type, lot or batch information, and where it was used; code provisions rely on product identification and applicable standards[1].
- Keep both sets of manufacturer instructions: the underlayment instructions and the metal-roof system instructions. The roof covering must be installed according to applicable manufacturer instructions[1][3].
- Photograph the dry-in stage, valleys, eaves, penetrations, seams, and transitions before panels or trim hide them. Photos support your file; they do not replace required inspections or written approvals[4].
- Ask for the signed warranty, completion documentation, permit and inspection records when applicable, and a written explanation of exclusions, maintenance duties, and claim steps. The written terms—not a sales summary—control.
Why include underlayment in the warranty file?
Underlayment is part of the roof assembly, not an unimportant leftover beneath the visible metal. The International Residential Code says roof coverings must follow the applicable code provisions and the manufacturer’s installation instructions; its underlayment section covers metal roof shingles and metal roof panels and calls for materials to meet applicable standards[1]. A record that identifies what was specified and installed gives a future reviewer a way to compare the actual assembly with those instructions.
That distinction matters because a long metal-roof service life does not automatically mean every underlayment, fastener, sealant, or detail is interchangeable. Manufacturer guidance notes that synthetic or polymer-based underlayments can be acceptable when the panel manufacturer permits them, and emphasizes installation according to the manufacturer’s instructions[3]. Retain the documents that show compatibility rather than relying on memory or a generic product description.
| Record group | Examples | Why it matters | When to obtain |
|---|---|---|---|
| Product identity | Brand, product number, label, ASTM designation, lot or batch | Connects the installed membrane to published requirements[1] | Before or during installation |
| Instructions and approvals | Underlayment guide, panel guide, revisions, substitutions, approved details | Shows the intended compatible assembly[1][3][4] | Before work; update if changed |
| Concealed work | Dated photos of dry-in, valleys, eaves, penetrations, transitions | Preserves evidence before cover-up[4] | During installation |
| Local records | Permit, inspection sign-offs, corrections, close-out or local determination | Documents local oversight where applicable[2] | Before close-out |
| Warranty and completion | Signed warranties, registration, contract, change orders, final invoice | Defines parties, duties, exclusions, and claim path[5] | At final walk-through |
What underlayment product information should I request?
Ask the installer for the underlayment’s complete commercial name, manufacturer, product number, intended use, published technical data sheet, installation guide, and applicable ASTM designation or type classification. If available, retain a photograph or scan of the package label, including lot or batch information and any compliance marking. Code provisions call for labels on underlayment materials required to comply with listed standards, while roof-covering materials are to carry manufacturer identification and required testing-agency labels[1].
Also note where each product was installed: field areas, valleys, eaves, wall transitions, around penetrations, or other special locations. Do not assume one roll or membrane was used everywhere. Illinois’ Capital Development Board advises homeowners to verify local requirements and the roofing manufacturer’s warranty conditions, particularly for repairs to existing single-family homes[2]. A location-specific product schedule makes that verification easier.
Which installation instructions must match the underlayment and metal?
Keep the underlayment manufacturer’s current installation instructions alongside the metal panel or metal-shingle manufacturer’s instructions. The file should show required deck preparation, slope limits, overlaps, side laps, end laps, fastening or adhesion method, temperature limits, exposure limits, ventilation cautions, and treatment of penetrations. The IRC requires roof coverings to be applied in accordance with manufacturer instructions, and MBCI explains that underlayment selection and attachment for metal panels depend on those instructions[1][3].
Request the precise revision or publication date used for the project, plus any written technical clarification or approved substitution. A generic web page saved years later may not be the instruction set that governed the installation. If a product was substituted, retain the request, response, and approval in writing; Sheffield Metals’ warranty procedure illustrates why product approvals, drawings, specifications, and installation details are assembled before work begins for a system warranty[4].
What assembly drawings and concealed‑work evidence are needed?
For a residential project, the assembly record can be simple but specific: roof plan, panel or shingle profile, deck condition, underlayment layers, valley and eave details, flashing approach, fastener type, ventilation components, and penetrations. Include approved shop drawings or detail sheets when the manufacturer or installer provides them. Sheffield’s documented warranty process requires roof plans, specifications, elevations, and installation details, and says approved details should remain available at the project site[4].
Photographs are especially useful before the metal conceals the dry-in work. Have the installer document broad roof areas and close views of valleys, eaves, rakes, sidewalls, headwalls, chimneys, skylights, pipe boots, and other penetrations, with a date and location note. Do not climb onto the roof to take these images; ask the contractor to provide them. Photos support a record but cannot override an inspector’s determination, a manufacturer’s approval, or the warranty’s written conditions.
How do Illinois permits and inspections affect my warranty file?
Illinois is not a single permit rulebook for every residential roof project. The state’s official FAQ says repairs to existing homes may be regulated by the local authority having jurisdiction, and that privately funded plan reviews, permits, and inspections—when required—are handled locally[2]. Save the permit application or permit number, approved scope, inspection sign-offs, correction notices and close-out record, or a written statement from the local office explaining what was and was not required.
Use the municipality or county’s current contact information, not an old contractor assumption. The state also says the local code official is the authority on privately funded projects and directs owners to the local authority for guidance[2]. This record is not a promise that a warranty claim will succeed; it simply helps establish which local requirements applied and whether the documented work reached the required close-out stage.
What should the signed warranty and completion package include?
Keep the manufacturer’s product warranty, installer workmanship warranty, registration confirmation, signed contract, change orders, final invoice, completion certificate, and a written maintenance or inspection schedule. Separate product coverage from workmanship coverage and record who receives a notice, how quickly notice is required, what exclusions apply, and whether transfer or repair work affects coverage. NRCA cautions that roof-system warranties commonly have limitations and should be read as documents rather than treated as a general promise that a roof will never leak[5].
Ask the contractor to identify the exact roof system, not merely the metal color or profile. The file should connect the visible covering to the underlayment, flashings, accessories, and approved details. Sheffield’s process shows the practical value of completed, signed copies distributed to the owner and installer[4]. For Bishop's Metal Roofing, retain the current written warranty and any project-specific documents; Bishop's states a 50-year warranty, but the current written warranty controls all terms.
How should I organize the warranty and maintenance records?
Create one folder named with the property address and installation date, then use subfolders for contract, products, instructions, assembly details, photos, permits, inspections, warranty, and maintenance. Put a one-page index at the front listing the roof type, installer, manufacturer contacts, underlayment products, installation date, warranty numbers, and where the originals are stored. Scan paper documents as searchable PDFs and keep a second copy in a secure location.
Never alter an original image or certificate; if you annotate a copy, label it as an annotation.
What to request at the final walk‑through?
Before the crew leaves, ask for a plain-language handoff: the product schedule, underlayment data sheet, installation instructions, final assembly details, pre-concealment photos, permit and inspection record when applicable, signed warranty documents, registration proof, maintenance guidance, and contact process for a concern. Compare the handoff against the contract and note any missing document in writing. Do not accept a verbal assurance that a generic warranty will be sent later without a clear delivery date.
Have the installer explain which questions require the manufacturer, which require the local authority, and which belong to the installer under the contract. A metal-only roofing specialist focused on homes, such as Bishop's, works with stone-coated steel shingles and standing seam metal roofing; the project’s actual written scope and manufacturer documents identify the installed assembly. Keep the file accessible, but do not interpret it as a guarantee beyond the signed terms.
This homeowner education article is general information, not building-code, legal, insurance, engineering, or financial advice. Illinois requirements vary by local authority and code edition. Confirm project-specific requirements with the local authority, the applicable manufacturer, and the signed contract and warranty. Do not access a roof or attempt repairs yourself. Bishop's Metal Roofing states a 50-year warranty; its current written warranty controls all terms.