Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Installation

Does a Chimney Need a Cricket Before a Metal Roof Is Installed?

Quick answer

Not every chimney needs a cricket before metal roofing. Review chimneys that interrupt upslope drainage—especially wide chimneys, close to or crossing the ridge, on steep roofs, or where snow, ice, water, or debris concentrate; the locally adopted code and the metal system’s flashing instructions decide the requirement.

When does a chimney need a cricket on a metal roof?

Width and ridge relationship
Interpret width relative to the ridge. IRC provisions commonly address chimneys over 30 inches parallel to the ridge, while NRCA uses a broader review trigger; the adopted edition controls[1][2].
Slope and water volume
Steep roofs and concentrated runoff, snow, ice, or debris can make a saddle useful even when width alone does not decide the question[2][3].
Drainage path
The question is where water can go around the chimney without trapping debris or overwhelming upslope flashing. Geometry controls cricket size, slope, and support[3].
Metal system detail
Standing seam and stone-coated-steel systems use different laps, clips, flashings, closures, and counterflashing. Follow current instructions for the exact product[2][4].
Masonry condition
Open joints, movement, damaged mortar, an unstable cap, or rebuilding changes the sequence. Obtain qualified chimney or masonry findings first[2][5].
What prompts a cricket review
Observed conditionWhy a cricket may be reviewedWho verifies it
Upslope flow blockedSaddle redirects water, snow, ice, or debris[2][3].Roofer using system detail
Wide chimney or steep roofNRCA flags >24 inches and 6-in-12+; IRC wording controls[1][2].Code official and roofer
Masonry deteriorationFlashing cannot replace masonry or cap work[2][5].Chimney/masonry professional
Clear drainage and approved detailMetal alone does not mandate a cricket; code and detail apply[1][4].Roofer and code official
Can the cricket review proceed?
Cricket review can proceedResolve first
Sound masonry[5]Deterioration or movement[5]
Documented geometryDimensions or runoff unclear[1][2]
Exact system detail[4]No detail or incompatible metals[3][4]
Code requirements identified[1]Edition or exception unknown[1]

How do width, slope, masonry, and metal system affect the need?

This entry compares adopted-code provisions, NRCA guidance, metal-roof cricket guidance, installation documentation, and chimney-inspection boundaries[1][2][3][4][5].

When metal makes sense

  • Masonry condition and drainage path are reviewed[5].
  • Adopted code and any cricket exception are checked locally[1].
  • Exact system flashing and counterflashing detail is available[4].
  • Geometry makes diversion of runoff, snow, ice, or debris valuable[2][3].

When it is not recommended

  • Masonry deterioration, movement, or rebuilding remains unresolved[5].
  • The owner wants metal to conceal or cure a leak; this page does not diagnose leaks.
  • Geometry, dimensions, or drainage path are unknown[1][2].
  • The system lacks a current detail or requires incompatible metals[3][4].

This page does not inspect masonry, measure or draw a cricket, diagnose a leak, or state that an individual chimney meets code. It does not replace local code review, qualified chimney findings, or system-specific flashing details.

FAQ

Common questions about this topic

Does every chimney on a metal roof need a cricket?

No. Review width, ridge relationship, slope, drainage, expected snow or water, code, masonry, and the product detail. Local code and qualified professionals decide the project-specific resolution[1][2][3].

What width triggers a chimney cricket?

IRC provisions commonly address more than 30 inches parallel to the ridge, subject to edition and exceptions[1]. NRCA uses more than 24 inches, steep roofs, or substantial precipitation and debris as review triggers[2]. Local adoption controls.

Is a cricket different for standing seam and metal shingles?

The purpose is similar, but details differ. Standing seam coordinates panels, clips, seams, flashings, and closures; stone-coated-steel shingles use their own trim and flashing sequence. Follow current instructions for the exact product[3][4]. Do not adapt an asphalt detail without product documentation.

Can a cricket fix a leaking chimney?

Water entry may involve masonry, cap, counterflashing, step flashing, underlayment, fasteners, or geometry. Obtain appropriate inspection before changing the roof detail[2][5]. A cricket should not be treated as a universal leak cure.

Should chimney masonry be inspected before metal roofing?

Yes when deterioration, movement, open joints, a damaged cap, or rebuilding is present or suspected. Roofing cannot make failing masonry sound. Obtain qualified findings, then coordinate roof scope and flashing[5]. This does not certify code compliance. The findings guide sequencing; they do not replace a code decision.

Who decides whether my chimney meets code?

The authority having jurisdiction applies the locally adopted code, including amendments and exceptions[1]. A roofer can document geometry and propose a manufacturer detail; a chimney professional can assess condition. A proposal is not a code certification.

References

Sources

  1. 2018 International Residential Code, Section R1003.20 Chimney Crickets — International Code Council
  2. The Ins, Outs, and Arounds of Proper Crickets and Saddles — National Roofing Contractors Association
  3. Roof Crickets — ATAS International
  4. Roofing Installation Manual — Metal Construction Association / McElroy Metal
  5. Chimney and Masonry Safety Resources — Chimney Safety Institute of America

Built to last. Backed by Bishop's.

Make your next roof your last.

Two metal systems, one installation standard. In a consultation we inspect the roof, explain which system fits the house, and put the scope, warranty and financing options in writing.

Schedule consultation Call now