Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Metal Shingle Answers

Can a manufactured home have stone-coated steel shingles?

Quick answer

Yes — a manufactured home may be eligible for stone-coated steel shingles, but the decision depends on the home’s documented roof-load design, framing and deck, wind and snow-load zones, transport-built construction, the exact stone-coated steel system, and the authority having jurisdiction. Collect the home records first.

What factors determine if stone-coated steel can go on my manufactured home?

Home identity and records
Find HUD labels, data plate, serial/model, manufacturer, manual, prior roof work, and permits. HUD identifies the data plate as a source for design zones and manuals as repair guidance[1][2].
Roof load path
The assembly transfers dead load and weather forces through deck, framing, walls, chassis, supports, and foundation. “Lightweight” marketing does not establish capacity; property-specific review is required[1][4].
Deck and attachment
Stone-coated steel instructions can require particular slope, deck or battens, underlayment, fasteners, penetration, and flashing[3]. Damaged or unsuitable substrate can rule out the system.
First-pass review outcomes
StatusWhat is documentedNext step
Potentially feasibleHome records, roof measurements, substrate condition, and product instructions appear compatible[1][3]Obtain a written system-specific scope and verify local requirements[1][4]
Needs confirmationMissing data plate or manufacturer guidance, uncertain deck/load path, or unusual alteration[2][5]Ask the manufacturer, authority, or licensed structural engineer for written direction[1][4]
Do not proceed yetThe system cannot meet documented slope, fastening, substrate, load, or approval requirements[3][4]Use a different approved assembly or resolve the underlying condition first[1][3]
What the review is actually comparing
QuestionEvidence to collectWhy it matters
Can the home carry and transfer the assembly?Data plate, manufacturer records, roof framing/deck information, site observations, and engineer input when required[1][2]Capacity is an assembly and load-path question, not a shingle-weight shortcut[4].
Can the exact roof system be installed?Current installation manual, slope, substrate, fasteners, underlayment, flashing, and accessories[3]Product instructions control the system’s permitted details[3].

How do I get approval and who decides?

This answer prioritizes HUD guidance and a current stone-coated steel installation guide[1][2][3], supplemented by manufactured-home installation resources[4]. A state reroofing document illustrates why approval depends on scope and jurisdiction, not a Missouri or Illinois rule[5].

When metal makes sense

  • The home’s records identify a compatible roof-load design and the roof assembly can be evaluated without guessing[1][2].
  • The exact stone-coated steel manufacturer instructions match the measured slope, deck or battens, fasteners, flashing, and underlayment[3].
  • The manufacturer, authority having jurisdiction, and—when required—a licensed structural engineer provide a documented path forward[1][4].

When it is not recommended

  • The data plate, manufacturer information, or roof-load documentation is missing and no responsible party will confirm the design[1][2].
  • The deck, framing, supports, anchorage, or prior alterations raise unresolved structural questions[4].

This educational page does not determine structural capacity, interpret a HUD data plate, promise permitting or warranty eligibility, provide a price, or replace the individual home’s records, manufacturer guidance, authority review, or licensed engineering when required.

FAQ

Can a manufactured home have stone-coated steel shingles: common questions

Is a manufactured home the same as a mobile home for this question?

HUD describes post-June 15, 1976 manufactured homes as built to federal standards with certification labels on transportable sections[1]. Older mobile homes, altered homes, and additions may have different records and approval questions.

Does the HUD data plate approve stone-coated steel shingles?

No. HUD says the plate provides wind, snow, and roof-load zones[2]. It is a starting record, not product approval or structural certification for a new roof. The exact system and local review remain necessary.

Can a roof-over make the question easier?

It can conceal the original roof, add dead load, alter drainage and flashing, and make deck conditions harder to verify. The manufacturer instructions and authority requirements control; covering an existing roof does not automatically avoid structural or approval review[3][5].

Who should answer the structural-capacity question?

The owner provides records; the roofing professional identifies the proposed assembly; the manufacturer or a licensed structural engineer may address design questions. HUD directs owners to manufacturers, State Administrative Agencies, or HUD for concerns[1].

Will Missouri or Illinois always require a permit?

Administration varies with state, county, municipality, home type, and scope. Contact the authority having jurisdiction before work and obtain written direction. A state guide treats structural reroofing as a distinct permit question, not merely a covering replacement[5].

Can Bishop's confirm warranty eligibility from a photo?

No. Eligibility depends on manufacturer, profile, accessories, installation, substrate, documentation, and exclusions. Review current product instructions and warranty terms[3]. A photo cannot establish concealed conditions or eligibility.

References

Sources

  1. Manufactured Housing Homeowner Resources — U.S. Department of Housing and Urban Development
  2. Manufactured Housing HUD Labels (Tags) — U.S. Department of Housing and Urban Development
  3. DECRA Installation Guide – Shake XD — DECRA Roofing Systems
  4. HUD’s Model Installation Standards for Manufactured Homes — International Code Council
  5. Replacing the roof on your manufactured or mobile home — Washington State Department of Labor & Industries

Built to last. Backed by Bishop's.

Make your next roof your last.

Two metal systems, one installation standard. In a consultation we inspect the roof, explain which system fits the house, and put the scope, warranty and financing options in writing.

Schedule consultation Call now