Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Maintenance & Repair

Can roofing cement or tar be used to patch a metal roof?

Quick answer

Usually no: generic roofing cement or tar is not a system-approved default for a residential metal roof. Repairs depend on the exact system, finish, and thermal movement, with manufacturers favoring documented, system-specific details. For active leaks, protect interiors and arrange professional evaluation rather than applying an improvised patch.

What determines whether cement can patch a metal roof?

Installed system and profile
Standing-seam panels and stone-coated steel shingles use different interfaces. The installed manufacturer’s drawings and repair instructions control what belongs at a lap, penetration, flashing, or damaged component[1][2].
Substrate and finish
A sealant must adhere to the actual metal and factory finish without harming coating performance. Verify the specific paint system rather than infer compatibility from a generic roofing label[3][4].
Thermal movement
Metal expands and contracts with temperature. NRCA identifies movement at panels, attachments, joints, flashings, and substrates; a rigid or misplaced patch can stress those interfaces[2].
Repair versus concealment
Sealant is generally secondary defense at designed interfaces, not a cure-all or primary water barrier. A surface patch can hide damage and complicate later evaluation[3].
Records and warranty
Keep system identification, product data, photographs, weather timing, and repair records. The current written warranty controls; no generic product can be promised to preserve coverage[1][5].
Patch-material decision screen
Proposed patch materialCompatibility evidence available?Risk if used genericallyAppropriate next step
Generic asphaltic cement or tarUsually no system evidence[1][3]May fail under movement and obscure the original condition[2][3]Do not use as an approved repair; preserve evidence and seek review
Documented metal-roof sealantOnly if substrate, finish, location, and data agree[3][4]Wrong chemistry or exposed use can fail or harm finish[3][4]Have the repair party confirm the exact detail
Replacement metal or flashing detailRequires exact system documentation[1][2]An unmatched part can disrupt drainage, movement, or corrosion control[1][2]Use the manufacturer repair path and written scope

When metal makes sense

  • The installed system is identified and its manufacturer provides a repair path[1].
  • The material has written compatibility evidence for the actual substrate, finish, and location[3][4].
  • A professional can evaluate movement, flashing, drainage, and concealed conditions first[1][2].

When it is not recommended

  • A generic asphaltic patch is considered only because it is available; that is not compatibility evidence[3].
  • The documented system calls for replacement, formed flashing, profile-specific accessory, or another path[1][2].
  • The warranty or manufacturer documents cannot be reviewed before altering the system; do not assume approval[5].

This educational page does not diagnose a roof, identify a leak source, provide patch application steps, direct roof access, interpret a warranty, or replace a qualified professional’s system-specific repair evaluation.

FAQ

Can roofing cement or tar be used to patch a metal roof: common questions

Is tar the same as a metal-roof sealant?

No. “Tar,” asphaltic cement, and metal-roof sealant are different categories. Metal-roof guidance distinguishes chemistry, movement, substrate, finish, and location; sealant is not a cure-all or primary water barrier[3][4].

What should I do if water is entering right now?

Stay off the roof. From inside, move belongings away, use containers where safe, and document time, weather, visible effects, and pre-existing conditions. Arrange professional stabilization and evaluation; do not assume a generic patch is safe[1][2].

Can a product labeled for metal be used anywhere on a metal roof?

No. A “for metal” label does not establish suitability for every finish, profile, joint, flashing, or exposure. Match current technical data and the exact manufacturer detail to the installed system[1][3][4].

Will a cement patch stop a leak temporarily?

A patch may cover a symptom while leaving the water path, movement issue, flashing defect, or corrosion unresolved[1][2][3].

Can applying tar void my metal-roof warranty?

Warranty requirements, exclusions, approved materials, and documentation vary; the current written warranty controls. Record conditions before alteration and ask the responsible manufacturer or qualified professional about documentation[5].

References

Sources

  1. The NRCA Roofing Manual: Metal Panel and SPF Roof Systems—2012 overview — National Roofing Contractors Association
  2. Roofing Guidelines — National Roofing Contractors Association
  3. What is Metal Roof & Wall Sealant? Types, Uses, & Applications — Sheffield Metals
  4. How to Choose a Metal Roof Sealant — H.B. Fuller
  5. Metal Roofing Alliance homeowner resource — Metal Roofing Alliance

Built to last. Backed by Bishop's.

Make your next roof your last.

Two metal systems, one installation standard. In a consultation we inspect the roof, explain which system fits the house, and put the scope, warranty and financing options in writing.

Schedule consultation Call now