Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Jefferson County, Illinois

Metal Roofing in Belle Rive, IL

Stone-coated steel and standing seam roofs for Belle Rive homes, specified against 3 days of 1-inch hail, 12 days of severe wind and zone 4A winters on record.

Quick answer

Homes in Belle Rive, IL can choose Stone-Coated Steel Shingles and Standing Seam Metal Roofing from Bishop's Metal Roofing, and given 3 days of 1-inch-plus hail and 12 days of 58-mph-plus wind within 10 miles from 2016 through 2025, a full tear-off and deck check on homes built around 1978 should come first.

Population
3072025 Census estimate
Median home built
1978ACS 2020–2024
1-inch hail days
3Within 10 mi, 2016–2025
Climate zone
4AIECC 2021
01

Local roof brief

What should you check before putting a metal roof on a home in Belle Rive?

Belle Rive’s housing is older on average—median year built 1978 with 52% of homes built before 1980—which increases the chance that roof decking and flashings will need close inspection or full tear-off before a metal re-roof. The village is in IECC climate zone 4A and Jefferson County logged 10 winter storm event days from 2016–2025, so install ice-barrier at eaves and consider snow retention near entries. Severe winds occurred on 12 days and the highest estimated wind was 81 mph, so pay attention to edge, rake and ridge fastening details. Hail measurements show three days with 1.0-inch hail and a largest reported 1.25-inch storm, so ask about UL 2218 Class 4 impact-rated products. For Belle Rive’s predominantly single-family detached stock, Stone-Coated Steel often fits the neighborhood aesthetic while standing seam is appropriate where a sleeker, low-slope solution is needed.

02

What it means

What do these numbers mean for roofs in Belle Rive?

  1. Mid-century homes: inspect the deck

    Half of Belle Rive's 197 housing units were built in or before 1978, and 31% predate 1960. On 1970s-era houses, expect to find more than one layer of shingles and board decking; a full tear-off lets the crew re-deck where needed and fix ventilation before metal goes on.

  2. Winter: underlayment at the eaves

    Belle Rive is in IECC climate zone 4A, and Jefferson County recorded 10 winter-storm days from 2016 through 2025. Snow leaves a metal roof in sheets, so mark the doors, walks and lower roofs that need snow retention, and confirm ice barrier at eaves and valleys.

  3. Wind: ask about edge fastening

    From 2016 through 2025, 12 days brought severe wind within 10 miles of Belle Rive, with an estimated peak of 81 mph on July 1, 2023. That peak matches hurricane-force speed. 2 tornado tracks passed within 10 miles; the strongest was rated EF1 on March 19, 2020. Wind gets under trim before it lifts panels, so the fastening pattern at eaves, rakes and ridges belongs in the written proposal.

  4. Hail: know the local stone size

    3 days brought hail 1 inch or larger within 10 miles of Belle Rive from 2016 through 2025, topped by 1.25-inch (half dollar-size) stones on August 29, 2022. August has the most reports in the local record. The most recent 1-inch event was March 30, 2025. None of the reports reached 1.75 inches, so impact rating is a tiebreaker here rather than the deciding spec. Hail and impact ratings explained.

03

Roof report

The Belle Rive roof record: storms, climate and homes

Hail, 2016–2025, within 10 miles of Belle Rive
Days with hail 1 inch or larger34 reports
Days with hail 1.75 inches or larger0
Days with hail 2 inches or larger0
Largest hail reported1.25 inAugust 29, 2022
Most recent 1-inch hailMarch 30, 2025
Peak hail monthAugust
Wind and tornadoes, 2016–2025
Days with wind 58 mph or stronger1213 reports
Highest wind81 mphEstimated, July 1, 2023
Tornado tracks within 10 miles2Strongest EF1, March 19, 2020
Winter and climate
IECC climate zone4AMixed, humid
Winter-storm days (Jefferson County)10
Ice-storm days (Jefferson County)0
Housing snapshot (ACS 2020–2024)
Median year built1978
Built before 196031%
Built before 198052%
Built 2000 or later15%
Median home value$95,000
Housing units197
Owner-occupied67%
Single-family detached77%

Storm counts are NOAA Storm Events reports within 10 miles of Belle Rive's Census center point, January 2016 through December 2025; winter days are coded to Jefferson County. Reports depend on spotters and population, so rural totals run low. How we measure.

04

Two systems

Which of the two metal systems works best in Belle Rive?

Stone-Coated Steel Shingles in Belle Rive

Steel panels with a bonded stone granule finish that look like shingles, shake or tile. The natural fit for traditional pitched roofs, HOA neighborhoods and owners who want a familiar look with a steel core.

Standing Seam Metal Roofing in Belle Rive

Continuous vertical panels with raised, concealed-fastener seams. The fit for clean modern lines, farmhouse and lake homes, low-slope sections and fast snow shedding.

05

Community

About Belle Rive, Illinois

Belle Rive is an incorporated village in Jefferson County, southern Illinois, with an estimated 2025 population of 307. Jefferson County was established March 26, 1819; Mount Vernon serves as the county seat.

Community sources: Jefferson County, Illinois official website · Illinois Secretary of State IRAD: Jefferson County · National Weather Service point forecast for Belle Rive · NOAA National Centers for Environmental Information past weather · FEMA Flood Maps

FAQ

Belle Rive metal roofing questions

What is the strongest storm wind recorded near Belle Rive?

Severe wind events within 10 miles included 12 days with winds of 58 mph or higher and a highest estimated wind of 81 mph (July 1, 2023). That wind history means fastening and perimeter detailing should be designed for higher gust exposure.

Do metal roofs in Belle Rive need snow guards or extra ice protection?

Yes. Belle Rive is in IECC climate zone 4A and Jefferson County recorded 10 winter storm event days from 2016–2025, indicating a need for ice-barrier at eaves and consideration of snow retention or guards over entrances and walkways.

What should a mid-century Belle Rive homeowner check before switching to metal?

Owners of homes with a median build year of 1978 and 52% of homes built before 1980 should inspect roof decking, framing and existing underlayment. Expect to document roof geometry, ventilation and drainage and plan for possible full tear-off if multiple layers or deteriorated decking are found.

Should homes in Belle Rive get Stone-Coated Steel or Standing Seam?

Both systems are viable, but Stone-Coated Steel often suits Belle Rive’s predominantly single-family detached houses and conventional roof slopes because it offers a familiar shingle-like appearance. Standing seam is appropriate where a sleeker, low-slope or modern aesthetic is desired.

Consultation

Schedule your Belle Rive roofing consultation

Tell us about the house. We'll inspect the roof, recommend Stone-Coated Steel or Standing Seam for it, and put the scope, warranty and financing options in writing.

We use your details only to schedule your consultation. See our privacy policy.
Schedule consultation Call now