Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Franklin County, Illinois

Metal Roofing in Benton, IL

Metal roofs for Benton's 1950s-era housing, matched to the hail, wind and zone 4A winters recorded here.

Quick answer

Bishop's Metal Roofing installs Stone-Coated Steel Shingles and Standing Seam Metal Roofing on Benton, IL homes, and with 13 days of 1-inch-plus hail and 29 days of 58-mph-plus wind within 10 miles from 2016 through 2025, the detail to get right here is impact-rated steel.

Population
6,5582025 Census estimate
Median home built
1959ACS 2020–2024
1-inch hail days
13Within 10 mi, 2016–2025
Climate zone
4AIECC 2021
01

Local roof brief

What should Benton homeowners know before choosing a metal roof?

Benton sees frequent hail and an older housing stock that affect metal roofing choices. Within 10 miles there were 13 days of 1.0-inch-or-larger hail and a largest reported hail size of 3.0 inches, so impact-rated products tested to UL 2218 Class 4 are worth considering. About 51% of homes were built before 1960 (median year built 1959), which raises the likelihood of needing deck inspection and full tear-off of worn layers. Wind has been notable too: 29 severe-wind days and an estimated peak of 96 mph call for secure edge, rake and ridge fastening. Winter is moderate (IECC 4A and 10 county winter-storm days), suggesting ice-barrier at eaves and focused snow retention above entries. For Benton’s predominantly single-family, established housing, Stone-Coated Steel Shingles often suits the neighborhood appearance, while Standing Seam can fit where a sleeker modern profile is desired.

02

Roof report

Benton storm, climate and housing data

Hail, 2016–2025, within 10 miles of Benton
Days with hail 1 inch or larger1317 reports
Days with hail 1.75 inches or larger3
Days with hail 2 inches or larger1
Largest hail reported3 inFebruary 28, 2017
Most recent 1-inch hailSeptember 14, 2025
Peak hail monthMarch
Wind and tornadoes, 2016–2025
Days with wind 58 mph or stronger2938 reports
Highest wind96 mphEstimated, October 19, 2025
Tornado tracks within 10 miles5Strongest EF3, February 28, 2017
Winter and climate
IECC climate zone4AMixed, humid
Winter-storm days (Franklin County)10
Ice-storm days (Franklin County)0
Housing snapshot (ACS 2020–2024)
Median year built1959
Built before 196051%
Built before 198079%
Built 2000 or later11%
Median home value$87,000
Housing units3,462
Owner-occupied63%
Single-family detached77%

Storm counts are NOAA Storm Events reports within 10 miles of Benton's Census center point, January 2016 through December 2025; winter days are coded to Franklin County. Reports depend on spotters and population, so rural totals run low. How we measure.

03

What it means

What does Benton's record mean for a metal roof?

  1. Hail: check the impact rating

    NOAA logged 1-inch-or-larger hail on 13 days within 10 miles of Benton between 2016 and 2025; the biggest stones, 3 inches across (about a teacup), fell on February 28, 2017. March has the most reports in the local record. The most recent 1-inch event was September 14, 2025. Stones that size dent most roofing, so ask for a product tested to UL 2218 Class 4 and read how the warranty treats cosmetic denting versus leaks. Hail and impact ratings explained.

  2. Older homes: plan the tear-off and deck check

    Half of Benton's 3,462 housing units were built in or before 1959, and 51% predate 1960. Houses from that period were often re-roofed over the original layer, so the proposal should price a complete tear-off, per-sheet deck replacement and balanced attic ventilation.

  3. Wind: the perimeter matters most

    From 2016 through 2025, 29 days brought severe wind within 10 miles of Benton, with an estimated peak of 96 mph on October 19, 2025. That peak matches hurricane-force speed. 5 tornado tracks passed within 10 miles; the strongest was rated EF3 on February 28, 2017. Ask which tested uplift rating covers the whole assembly — panels, clips or nails, and trim — not just the panel itself.

  4. Winter: protect the eaves

    Benton is in IECC climate zone 4A, and Franklin County recorded 10 winter-storm days from 2016 through 2025. Codes in snow country commonly require ice-barrier underlayment at the eaves; on metal, add snow guards wherever sliding snow would land on people, cars or a lower roof.

04

Two systems

Which of the two metal systems works best in Benton?

Stone-Coated Steel Shingles in Benton

Steel panels with a bonded stone granule finish that look like shingles, shake or tile. The natural fit for traditional pitched roofs, HOA neighborhoods and owners who want a familiar look with a steel core.

Standing Seam Metal Roofing in Benton

Continuous vertical panels with raised, concealed-fastener seams. The fit for clean modern lines, farmhouse and lake homes, low-slope sections and fast snow shedding.

05

Community

About Benton, Illinois

Benton is an incorporated city and the county seat of Franklin County, Illinois. The city was organized in 1841 and became a city in 1902. The U.S. Census Bureau estimates Benton’s 2025 population at 6,558 and its 2020 land area at about 5.48 square miles; nearby features include Rend Lake in the county.

Community sources: U.S. Census Bureau QuickFacts: Benton city, Illinois · City of Benton: Benton History · Illinois State Archives IRAD: Franklin County · Franklin County, Illinois: County History · National Weather Service: Benton, IL forecast

FAQ

Benton metal roofing questions

Does Benton get enough hail to matter when choosing a metal roof?

Within 10 miles, Benton had 13 days with hail 1.0 inch or larger from 2016 through 2025, with the largest hail at 3.0 inches. That frequency and size make impact-rated materials (UL 2218 Class 4) a relevant consideration when selecting metal roofing.

What is the strongest storm wind recorded near Benton?

There were 29 severe-wind days within 10 miles in 2016–2025 and an estimated peak wind of 96 mph. Those wind conditions point to the need for robust edge, rake and ridge fastening details and properly specified attachment for any metal roof.

How much snow and ice protection does a metal roof need in Benton?

Franklin County recorded 10 winter-storm event days and Benton is in IECC climate zone 4A. That climate and the recorded winter events support using ice-barrier at eaves and targeted snow retention like guards above entries where downhill or pedestrian risk exists.

Is an older Benton home ready for a metal roof as it stands?

About 51% of Benton housing was built before 1960 (median year built 1959), so many older homes benefit from a deck inspection and often a full tear-off of old roofing layers. Whether major structural work is needed depends on the specific deck and framing condition revealed by that inspection.

Consultation

Schedule your Benton roofing consultation

Tell us about the house. We'll inspect the roof, recommend Stone-Coated Steel or Standing Seam for it, and put the scope, warranty and financing options in writing.

We use your details only to schedule your consultation. See our privacy policy.
Schedule consultation Call now