Vermilion County, Illinois
Metal Roofing in Danville, IL
Two metal roof systems, one local record: 10 days of 1-inch hail and 35 days of 58-mph wind within 10 miles of Danville since 2016.
Homes in Danville, IL can choose Stone-Coated Steel Shingles and Standing Seam Metal Roofing from Bishop's Metal Roofing, and given 10 days of 1-inch-plus hail and 35 days of 58-mph-plus wind within 10 miles from 2016 through 2025, ice-barrier underlayment and snow retention for zone 5A winters should come first.
- Population
- 28,1382025 Census estimate
- Median home built
- 1951ACS 2020–2024
- 1-inch hail days
- 10Within 10 mi, 2016–2025
- Climate zone
- 5AIECC 2021
Local roof brief
What matters most for a metal roof in Danville?
Danville sits in IECC climate zone 5A and has an estimated population of 28,138, which helps frame local roofing exposure. With 60% of homes built before 1960 and a median year built of 1951, many roofs need deck inspection and often full tear-off of old layers before installing metal. Storms recorded 35 days with 58+ mph winds and a highest estimated wind of 90 mph, so edge, rake and ridge fastening details matter. Hail has occurred 10 days of 1.00"+ size and a largest reported hail of 2.75", so ask about impact-tested products to UL 2218 Class 4. For Danville’s in-town, older housing, Stone-Coated Steel Shingles often matches traditional roof lines, while Standing Seam suits simpler slopes and modern replacements.
What it means
What does Danville's record mean for a metal roof?
- Snow load: plan retention and ice barrier
Danville is in IECC climate zone 5A, and Vermilion County recorded 9 winter-storm days from 2016 through 2025. Metal sheds snow fast, so plan snow retention above entries, walkways and lower roofs, and self-adhered ice-barrier underlayment at the eaves and valleys.
- Older homes: plan the tear-off and deck check
Half of Danville's 13,948 housing units were built in or before 1951, and 60% predate 1960. On 1950s-era houses, expect to find more than one layer of shingles and board decking; a full tear-off lets the crew re-deck where needed and fix ventilation before metal goes on.
- Wind: ask about edge fastening
NOAA recorded 58-mph-plus wind within 10 miles of Danville on 35 days; the top gust, 90 mph (estimated), came on May 20, 2025. That peak matches hurricane-force speed. 5 tornado tracks passed within 10 miles; the strongest was rated EF1 on September 9, 2016. Roofs fail at the edges first in wind like that; get the eave, rake and ridge fastening schedule and the assembly's uplift rating in the scope.
- Hail: know the local stone size
10 days brought hail 1 inch or larger within 10 miles of Danville from 2016 through 2025, topped by 2.75-inch (baseball-size) stones on May 16, 2019. May is the peak month here. The most recent 1-inch event was August 16, 2025. Hail in that range marks nearly any roof surface; specify a UL 2218 Class 4 product and get the warranty's cosmetic-damage language in writing. Hail and impact ratings explained.
Roof report
Danville storm, climate and housing data
| Days with hail 1 inch or larger | 1021 reports |
|---|---|
| Days with hail 1.75 inches or larger | 2 |
| Days with hail 2 inches or larger | 2 |
| Largest hail reported | 2.75 inMay 16, 2019 |
| Most recent 1-inch hail | August 16, 2025 |
| Peak hail month | May |
| Days with wind 58 mph or stronger | 3582 reports |
|---|---|
| Highest wind | 90 mphEstimated, May 20, 2025 |
| Tornado tracks within 10 miles | 5Strongest EF1, September 9, 2016 |
| IECC climate zone | 5ACold, moist |
|---|---|
| Winter-storm days (Vermilion County) | 9 |
| Ice-storm days (Vermilion County) | 0 |
| Median year built | 1951 |
|---|---|
| Built before 1960 | 60% |
| Built before 1980 | 86% |
| Built 2000 or later | 4% |
| Median home value | $79,000 |
| Housing units | 13,948 |
| Owner-occupied | 57% |
| Single-family detached | 73% |
Storm counts are NOAA Storm Events reports within 10 miles of Danville's Census center point, January 2016 through December 2025; winter days are coded to Vermilion County. Reports depend on spotters and population, so rural totals run low. How we measure.
Two systems
Stone-coated steel or standing seam: which suits Danville?
Stone-Coated Steel Shingles in Danville
Steel panels with a bonded stone granule finish that look like shingles, shake or tile. The natural fit for traditional pitched roofs, HOA neighborhoods and owners who want a familiar look with a steel core.
Standing Seam Metal Roofing in Danville
Continuous vertical panels with raised, concealed-fastener seams. The fit for clean modern lines, farmhouse and lake homes, low-slope sections and fast snow shedding.
Community
About Danville, Illinois
Danville is an incorporated city and the county seat of Vermilion County, Illinois, with a 2025 population estimate of 28,138 and 17.86 square miles of land. Nearby incorporated places include Tilton, Westville, and Georgetown.
Community sources: U.S. Census Bureau QuickFacts: Danville city, Illinois · City of Danville, Illinois Official Website · National Weather Service Central Illinois · FEMA Flood Maps · Illinois Flood Maps: Vermilion County
FAQ
Danville metal roofing questions
How common is damaging hail in Danville, and what does it mean for a metal roof?
Hail of 1.00" or larger occurred on 10 days within 10 miles from 2016 through 2025, with the largest hail at 2.75" on May 16, 2019. That frequency and size make impact-tested products relevant; UL 2218 Class 4 impact performance is an appropriate standard to consider.
What is the strongest storm wind recorded near Danville?
There were 35 severe-wind days of 58 mph or higher within 10 miles from 2016 through 2025, with the highest estimated wind at 90 mph on May 20, 2025. These wind figures point to the need for robust edge, rake and ridge fastening details on a metal roof.
Do metal roofs in Danville need snow guards or extra ice protection?
Danville is in IECC climate zone 5A and Vermilion County recorded 9 winter-storm event days from 2016–2025. That climate and winter activity support using ice-barrier underlayment at eaves and considering snow retention above entries and walkways.
Can an older Danville home take a metal roof without major structural work?
With 60% of housing built before 1960 and a median year built of 1951, many older Danville homes need deck inspection and may require full tear-off of existing layers prior to metal installation. Structural adequacy should be verified during assessment.
Nearby
Communities near Danville
Consultation
Schedule your Danville roofing consultation
Tell us about the house. We'll inspect the roof, recommend Stone-Coated Steel or Standing Seam for it, and put the scope, warranty and financing options in writing.