Montgomery County, Illinois
Metal Roofing in Taylor Springs, IL
Stone-coated steel and standing seam roofs for Taylor Springs homes, specified against 5 days of 1-inch hail, 21 days of severe wind and zone 4A winters on record.
For Taylor Springs, IL, Bishop's Metal Roofing offers Stone-Coated Steel Shingles and Standing Seam Metal Roofing; the local record — 5 days of 1-inch-plus hail and 21 days of 58-mph-plus wind within 10 miles from 2016 through 2025 — makes a tested uplift rating and secure perimeter trim the first thing to confirm.
- Population
- 7272025 Census estimate
- Median home built
- 1970ACS 2020–2024
- 1-inch hail days
- 5Within 10 mi, 2016–2025
- Climate zone
- 4AIECC 2021
Local roof brief
What should you check before putting a metal roof on a home in Taylor Springs?
Taylor Springs sits in a zone with notable wind and tornado exposure: 21 severe-wind days (≥58 mph) and nine tornado tracks within 10 miles, so edge, rake and ridge fastening details and seam attachment matter for a metal roof. Much of the housing stock is older: 40% built before 1960 and 66% built before 1980, which increases the chance that a deck inspection and full tear-off will be needed. Hail has produced stones up to 2.0 inches and five days ≥1.0 inch from 2016–2025, so consider impact-rated products tested to UL 2218 Class 4. Montgomery County recorded seven winter storm days, and IECC climate zone 4A supports using appropriate underlayment and snow retention near entries. For Taylor Springs homes, Stone-Coated Steel often matches local single-family roof profiles, while Standing Seam suits simpler roof planes and higher wind attachments; a property-specific evaluation is required.
Roof report
Taylor Springs roof weather and housing report
| Days with hail 1 inch or larger | 58 reports |
|---|---|
| Days with hail 1.75 inches or larger | 3 |
| Days with hail 2 inches or larger | 1 |
| Largest hail reported | 2 inMarch 14, 2024 |
| Most recent 1-inch hail | March 14, 2024 |
| Peak hail month | May |
| Days with wind 58 mph or stronger | 2124 reports |
|---|---|
| Highest wind | 81 mphEstimated, April 29, 2017 |
| Tornado tracks within 10 miles | 9Strongest EF2, December 1, 2018 |
| IECC climate zone | 4AMixed, humid |
|---|---|
| Winter-storm days (Montgomery County) | 7 |
| Ice-storm days (Montgomery County) | 0 |
| Median year built | 1970 |
|---|---|
| Built before 1960 | 40% |
| Built before 1980 | 66% |
| Built 2000 or later | 9% |
| Median home value | $67,000 |
| Housing units | 268 |
| Owner-occupied | 73% |
| Single-family detached | 73% |
Storm counts are NOAA Storm Events reports within 10 miles of Taylor Springs's Census center point, January 2016 through December 2025; winter days are coded to Montgomery County. Reports depend on spotters and population, so rural totals run low. How we measure.
What it means
How should Taylor Springs's storm and housing record shape your roof?
- Tornado country: secure the perimeter
NOAA recorded 58-mph-plus wind within 10 miles of Taylor Springs on 21 days; the top gust, 81 mph (estimated), came on April 29, 2017. That peak matches hurricane-force speed. 9 tornado tracks passed within 10 miles; the strongest was rated EF2 on December 1, 2018. Wind failures start at the perimeter, so ask how eave, rake and ridge trim is fastened and which uplift rating the full assembly carries.
- 1970s homes: check the deck first
Half of Taylor Springs's 268 housing units were built in or before 1970, and 40% predate 1960. On 1970s-era houses, expect to find more than one layer of shingles and board decking; a full tear-off lets the crew re-deck where needed and fix ventilation before metal goes on.
- Hail: check the impact rating
Within 10 miles of Taylor Springs, hail of at least 1 inch fell on 5 days from 2016 through 2025, and the largest report was 2 inches on March 14, 2024. May is the peak month here. At that size, confirm UL 2218 Class 4 testing for the exact panel or shingle being quoted, and ask whether cosmetic dents are excluded from coverage. Hail and impact ratings explained.
- Winter: protect the eaves
Taylor Springs is in IECC climate zone 4A, and Montgomery County recorded 7 winter-storm days from 2016 through 2025. Ice-barrier underlayment at eaves and valleys is cheap insurance here, and snow guards are worth it over doors and walkways.
Two systems
Which of the two metal systems works best in Taylor Springs?
Stone-Coated Steel Shingles in Taylor Springs
Steel panels with a bonded stone granule finish that look like shingles, shake or tile. The natural fit for traditional pitched roofs, HOA neighborhoods and owners who want a familiar look with a steel core.
Standing Seam Metal Roofing in Taylor Springs
Continuous vertical panels with raised, concealed-fastener seams. The fit for clean modern lines, farmhouse and lake homes, low-slope sections and fast snow shedding.
Community
About Taylor Springs, Illinois
Taylor Springs is an incorporated village in Montgomery County, Illinois, located just south of Hillsboro beside Illinois Routes 127 and 185 and near Interstate 55. The village has an estimated 2025 population of 727.
Community sources: The Village of Taylor Springs · Montgomery County Municipal Phone Numbers, Addresses & Meeting Information · Montgomery County Tornado History 1950–2026 · FEMA Flood Maps · The City of Hillsboro, Illinois
FAQ
Taylor Springs metal roofing questions
How common is damaging hail in Taylor Springs, and what does it mean for a metal roof?
Damaging hail has occurred: five days with hail ≥1.0 inch and one day with hail up to 2.0 inches within 10 miles from 2016–2025. Yes—those hail statistics support specifying impact-rated metal roofing tested to UL 2218 Class 4 if impact resistance is a priority.
What is the strongest storm wind recorded near Taylor Springs?
Severe winds reached ≥58 mph on 21 days within 10 miles from 2016–2025, with an estimated peak of 81 mph. That frequency and peak favor careful edge, rake and ridge fastening, plus attachment details suited for high-wind events.
What should a mid-century Taylor Springs homeowner check before switching to metal?
Owners should plan a deck inspection and expect a possible full tear-off because 40% of homes were built before 1960 and 66% before 1980. Older decks and multiple roof layers increase the chance that structural repairs or complete replacement of underlying materials will be needed.
Which metal roof suits homes in Taylor Springs: Stone-Coated Steel or Standing Seam?
Either system can work, but Stone-Coated Steel often fits the dominant single-family, detached home profiles in the village, while Standing Seam suits simpler roof planes where higher wind attachment and continuous seams are preferred. A property-specific assessment determines the best choice.
Nearby
Communities near Taylor Springs
Consultation
Schedule your Taylor Springs roofing consultation
Tell us about the house. We'll inspect the roof, recommend Stone-Coated Steel or Standing Seam for it, and put the scope, warranty and financing options in writing.