Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Nodaway County, Missouri

Metal Roofing in Burlington Junction, MO

Two metal roof systems, one local record: 3 days of 1-inch hail and 9 days of 58-mph wind within 10 miles of Burlington Junction since 2016.

Quick answer

Bishop's Metal Roofing installs Stone-Coated Steel Shingles and Standing Seam Metal Roofing on Burlington Junction, MO homes, and with 3 days of 1-inch-plus hail and 9 days of 58-mph-plus wind within 10 miles from 2016 through 2025, the detail to get right here is zone 5A snow and ice details.

Population
4832025 Census estimate
1-inch hail days
3Within 10 mi, 2016–2025
Climate zone
5AIECC 2021
01

Local roof brief

What matters most for a metal roof in Burlington Junction?

Burlington Junction sits in IECC Climate Zone 5A with 10 winter-storm event days and one recorded ice-storm day since 2016. That climate means ice-barrier underlayment at eaves and targeted snow retention above entries should be part of decisions for a metal roof. Sixty percent of homes were built before 1960, so deck condition and the likelihood of full tear-off deserve early attention. Nine days of severe wind (58+ mph) and a recorded peak gust of 76 mph suggest careful edge, rake and ridge fastening and through-fastening where appropriate. Hail has produced 1.0-inch stones (largest on May 6, 2023), so ask about impact-rated finishes tested to UL 2218 Class 4. For Burlington Junction’s mix of older single-family housing and small-town properties, stone-coated steel shingles often matches traditional roof shapes and neighborhood appearance, while standing seam suits simple low-slope or contemporary profiles.

02

What it means

What do these numbers mean for roofs in Burlington Junction?

  1. Snow and ice: retention and ice barrier

    Burlington Junction is in IECC climate zone 5A, and Nodaway County recorded 10 winter-storm days and 1 ice-storm day from 2016 through 2025 (most recent ice storm: January 2017). Metal sheds snow fast, so plan snow retention above entries, walkways and lower roofs, and self-adhered ice-barrier underlayment at the eaves and valleys.

  2. Wind: the perimeter matters most

    NOAA recorded 58-mph-plus wind within 10 miles of Burlington Junction on 9 days; the top gust, 76 mph (measured), came on June 11, 2018. That peak matches hurricane-force speed. 2 tornado tracks passed within 10 miles; the strongest was rated EF0 on October 8, 2018. Edge and ridge fastening is still the detail to ask about; it is where wind gets under any roof first.

  3. Hail: check the impact rating

    3 days brought hail 1 inch or larger within 10 miles of Burlington Junction from 2016 through 2025, topped by 1 inch (quarter-size) stones on May 6, 2023. April is the peak month here. Reported stones here stayed below golf-ball size; installed correctly, a steel roof rides out hail in that range without leaks. Hail and impact ratings explained.

  4. Owners who stay: buy the roof once

    81% of homes in Burlington Junction are owner-occupied. If you plan to stay, compare one metal roof against the two or three asphalt roofs the same 50 years would otherwise take. Compare lifetime cost.

03

Roof report

Burlington Junction storm, climate and housing data

Hail, 2016–2025, within 10 miles of Burlington Junction
Days with hail 1 inch or larger34 reports
Days with hail 1.75 inches or larger0
Days with hail 2 inches or larger0
Largest hail reported1 inMay 6, 2023
Most recent 1-inch hailMay 6, 2023
Peak hail monthApril
Wind and tornadoes, 2016–2025
Days with wind 58 mph or stronger915 reports
Highest wind76 mphMeasured, June 11, 2018
Tornado tracks within 10 miles2Strongest EF0, October 8, 2018
Winter and climate
IECC climate zone5ACold, moist
Winter-storm days (Nodaway County)10
Ice-storm days (Nodaway County)1Latest January 2017
Housing snapshot (ACS 2020–2024)
Built before 196060%
Built before 198085%
Built 2000 or later7%
Median home value$91,000
Housing units252
Owner-occupied81%
Single-family detached80%

Storm counts are NOAA Storm Events reports within 10 miles of Burlington Junction's Census center point, January 2016 through December 2025; winter days are coded to Nodaway County. Reports depend on spotters and population, so rural totals run low. How we measure.

04

Two systems

Stone-coated steel or standing seam: which suits Burlington Junction?

Stone-Coated Steel Shingles in Burlington Junction

Steel panels with a bonded stone granule finish that look like shingles, shake or tile. The natural fit for traditional pitched roofs, HOA neighborhoods and owners who want a familiar look with a steel core.

Standing Seam Metal Roofing in Burlington Junction

Continuous vertical panels with raised, concealed-fastener seams. The fit for clean modern lines, farmhouse and lake homes, low-slope sections and fast snow shedding.

05

Community

About Burlington Junction, Missouri

Burlington Junction is a city in Nodaway County with a Third Class County Township form of government; the county seat is Maryville. The area includes agricultural and industrial businesses, and recent state-supported wastewater-treatment improvements were reported in 2024.

Community sources: Nodaway County, Missouri official website · National Weather Service Burlington Junction forecast · Missouri Department of Natural Resources: Burlington Junction wastewater assistance · Missouri Department of Transportation Burlington Junction map

FAQ

Burlington Junction metal roofing questions

Should metal roofs in Burlington Junction have snow guards and ice-barrier underlayment?

Yes. Climate Zone 5A and 10 winter-storm event days with one recorded ice event indicate the need for ice-barrier underlayment at eaves and selective snow retention or guards above entries to manage drifting and roof-runoff.

Will an older house in Burlington Junction need structural work for a metal roof?

Possibly, but 60% of homes were built before 1960 so many roofs will need deck inspection and may require full tear-off or deck reinforcement before installing metal to ensure fastening and load support are adequate.

Stone-Coated Steel or Standing Seam — which fits Burlington Junction houses better?

Both can work; stone-coated steel shingles tend to match the town’s older single-family character and common roof geometries, while standing seam is appropriate for simpler, low-slope or more contemporary roof forms and agricultural or outbuilding uses.

Consultation

Schedule your Burlington Junction roofing consultation

Tell us about the house. We'll inspect the roof, recommend Stone-Coated Steel or Standing Seam for it, and put the scope, warranty and financing options in writing.

We use your details only to schedule your consultation. See our privacy policy.
Schedule consultation Call now