Texas County, Missouri
Metal Roofing in Licking, MO
Stone-coated steel and standing seam roofs for Licking homes, specified against 5 days of 1-inch hail, 12 days of severe wind and zone 4A winters on record.
Homes in Licking, MO can choose Stone-Coated Steel Shingles and Standing Seam Metal Roofing from Bishop's Metal Roofing, and given 5 days of 1-inch-plus hail and 12 days of 58-mph-plus wind within 10 miles from 2016 through 2025, zone 4A snow and ice details should come first.
- Population
- 2,9582025 Census estimate
- Median home built
- 1974ACS 2020–2024
- 1-inch hail days
- 5Within 10 mi, 2016–2025
- Climate zone
- 4AIECC 2021
Local roof brief
What should you check before putting a metal roof on a home in Licking?
Licking sits in IECC climate zone 4A and recorded 3 county ice-storm event days and 7 winter-storm event days from 2016–2025, so ice protection at eaves and snow retention above entries should be considered. About 5 hail days ≥1.0 inch and at least one 2.5-inch hail event (largest on June 2, 2018) mean homeowners should ask about impact-rated products tested to UL 2218 Class 4. Twelve severe-wind days and an estimated peak gust of 64 mph (April 30, 2019) point to firm edge, rake and ridge fastening details. The local housing stock has a median year built of 1974 and roughly 60% built before 1980, so deck condition and full tear-off planning are important. For Licking’s mix of mid-century single-family homes, Stone-Coated Steel Shingles often matches neighborhood appearance, while Standing Seam suits simpler roof profiles and long eave runs.
What it means
How should Licking's storm and housing record shape your roof?
- Snow and ice: retention and ice barrier
Licking is in IECC climate zone 4A, and Texas County recorded 7 winter-storm days and 3 ice-storm days from 2016 through 2025 (most recent ice storm: January 2025). Ask for ice-barrier membrane at the eaves and valleys even in zone 4A; freeze-thaw cycles find any gap at the roof edge.
- 1970s homes: check the deck first
Half of Licking's 760 housing units were built in or before 1974, and 27% predate 1960. On 1970s-era houses, expect to find more than one layer of shingles and board decking; a full tear-off lets the crew re-deck where needed and fix ventilation before metal goes on.
- Hail: check the impact rating
Within 10 miles of Licking, hail of at least 1 inch fell on 5 days from 2016 through 2025, and the largest report was 2.5 inches on June 2, 2018. Most of those reports came in April. The most recent 1-inch event was May 13, 2022. At that size, confirm UL 2218 Class 4 testing for the exact panel or shingle being quoted, and ask whether cosmetic dents are excluded from coverage. Hail and impact ratings explained.
- Wind: the perimeter matters most
From 2016 through 2025, 12 days brought severe wind within 10 miles of Licking, with an estimated peak of 64 mph on April 30, 2019. 5 tornado tracks passed within 10 miles; the strongest was rated EF1 on October 21, 2019. Edge and ridge fastening is still the detail to ask about; it is where wind gets under any roof first.
Roof report
The Licking roof record: storms, climate and homes
| Days with hail 1 inch or larger | 55 reports |
|---|---|
| Days with hail 1.75 inches or larger | 1 |
| Days with hail 2 inches or larger | 1 |
| Largest hail reported | 2.5 inJune 2, 2018 |
| Most recent 1-inch hail | May 13, 2022 |
| Peak hail month | April |
| Days with wind 58 mph or stronger | 1216 reports |
|---|---|
| Highest wind | 64 mphEstimated, April 30, 2019 |
| Tornado tracks within 10 miles | 5Strongest EF1, October 21, 2019 |
| IECC climate zone | 4AMixed, humid |
|---|---|
| Winter-storm days (Texas County) | 7 |
| Ice-storm days (Texas County) | 3Latest January 2025 |
| Median year built | 1974 |
|---|---|
| Built before 1960 | 27% |
| Built before 1980 | 60% |
| Built 2000 or later | 13% |
| Median home value | $117,000 |
| Housing units | 760 |
| Owner-occupied | 53% |
| Single-family detached | 74% |
Storm counts are NOAA Storm Events reports within 10 miles of Licking's Census center point, January 2016 through December 2025; winter days are coded to Texas County. Reports depend on spotters and population, so rural totals run low. How we measure.
Two systems
Which of the two metal systems works best in Licking?
Stone-Coated Steel Shingles in Licking
Steel panels with a bonded stone granule finish that look like shingles, shake or tile. The natural fit for traditional pitched roofs, HOA neighborhoods and owners who want a familiar look with a steel core.
Standing Seam Metal Roofing in Licking
Continuous vertical panels with raised, concealed-fastener seams. The fit for clean modern lines, farmhouse and lake homes, low-slope sections and fast snow shedding.
Community
About Licking, Missouri
Licking is a city in Texas County, Missouri, with an estimated population of 2,958. U.S. Highway 63 and Missouri Highways 32 and 137 run through the city; Interstate 44 is 35 miles north via Highway 63. Licking is in south-central Missouri’s Ozark Heritage Region.
Community sources: City of Licking, Missouri — Community · U.S. Census Bureau QuickFacts — Texas County, Missouri · National Weather Service — Licking, MO forecast · Texas County, Missouri — County History
FAQ
Licking metal roofing questions
How common is damaging hail in Licking, and what does it mean for a metal roof?
Damaging hail has occurred in the area: 5 days with hail ≥1.0 inch and at least one 2.5-inch event (June 2, 2018) within 10 miles during 2016–2025. That frequency and size justify asking about impact-rated materials tested to UL 2218 Class 4 for a metal roof.
How much snow and ice protection does a metal roof need in Licking?
Yes; Licking is in climate zone 4A and the county had 7 winter-storm event days and 3 ice-storm event days from 2016–2025. Those winter and ice signals support using ice-barrier underlayment at eaves and considering snow retention or guards above entries.
What should owners of Licking's mid-century homes check before a metal roof replacement?
Owners should prioritize deck inspection and plan for a full tear-off when needed because the median year built is 1974 and about 60% of housing was built before 1980. Confirm roof deck condition, hidden layers, and flashing details before installation.
Stone-Coated Steel or Standing Seam — which fits Licking houses better?
Either system can work, but Stone-Coated Steel Shingles often aligns with the local single-family, mid-century appearance while Standing Seam is well suited to simpler roof geometries and long eave runs found on some properties. Choose based on roof shape and neighborhood style.
Nearby
Communities near Licking
Consultation
Schedule your Licking roofing consultation
Tell us about the house. We'll inspect the roof, recommend Stone-Coated Steel or Standing Seam for it, and put the scope, warranty and financing options in writing.