Newton County, Missouri
Metal Roofing in Redings Mill, MO
Two metal roof systems, one local record: 29 days of 1-inch hail and 57 days of 58-mph wind within 10 miles of Redings Mill since 2016.
For Redings Mill, MO, Bishop's Metal Roofing offers Stone-Coated Steel Shingles and Standing Seam Metal Roofing; the local record — 29 days of 1-inch-plus hail and 57 days of 58-mph-plus wind within 10 miles from 2016 through 2025 — makes impact-rated steel the first thing to confirm.
- Population
- 1592025 Census estimate
- 1-inch hail days
- 29Within 10 mi, 2016–2025
- Climate zone
- 4AIECC 2021
Local roof brief
What should you check before putting a metal roof on a home in Redings Mill?
Redings Mill homeowners face frequent hail and strong wind when choosing a metal roof. The area recorded 29 days of hail 1.0" or larger (2016–2025) and a largest reported hailstone of 2.75", so impact-rated products tested to UL 2218 Class 4 are a sensible consideration. Storm winds were recorded on 57 days at 58 mph or higher and a measured peak of 79 mph, which calls for careful edge, rake and ridge fastening. With 55% of homes built before 1960, expect deck inspection and possible full tear-off of old layers on older houses. County winter data show 8 winter-storm days and IECC Climate Zone 4A, suggesting attention to snow retention and ice-barrier at eaves. For this village scale and older housing, Stone-Coated Steel Shingles often fits neighborhood aesthetics, while Standing Seam suits more contemporary rooflines.
Roof report
Redings Mill storm, climate and housing data
| Days with hail 1 inch or larger | 2961 reports |
|---|---|
| Days with hail 1.75 inches or larger | 7 |
| Days with hail 2 inches or larger | 1 |
| Largest hail reported | 2.75 inMarch 9, 2017 |
| Most recent 1-inch hail | September 16, 2025 |
| Peak hail month | May |
| Days with wind 58 mph or stronger | 5796 reports |
|---|---|
| Highest wind | 79 mphMeasured, March 30, 2025 |
| Tornado tracks within 10 miles | 7Strongest EF3, May 22, 2019 |
| IECC climate zone | 4AMixed, humid |
|---|---|
| Winter-storm days (Newton County) | 8 |
| Ice-storm days (Newton County) | 0 |
| Built before 1960 | 55% |
|---|---|
| Built before 1980 | 84% |
| Built 2000 or later | 2% |
| Median home value | $166,000 |
| Housing units | 56 |
| Owner-occupied | 91% |
| Single-family detached | 100% |
Storm counts are NOAA Storm Events reports within 10 miles of Redings Mill's Census center point, January 2016 through December 2025; winter days are coded to Newton County. Reports depend on spotters and population, so rural totals run low. How we measure.
What it means
What do these numbers mean for roofs in Redings Mill?
- Hail: impact class comes first
Within 10 miles of Redings Mill, hail of at least 1 inch fell on 29 days from 2016 through 2025, and the largest report was 2.75 inches on March 9, 2017. May is the peak month here. The most recent 1-inch event was September 16, 2025. At that size, confirm UL 2218 Class 4 testing for the exact panel or shingle being quoted, and ask whether cosmetic dents are excluded from coverage. Hail and impact ratings explained.
- Wind: the perimeter matters most
NOAA recorded 58-mph-plus wind within 10 miles of Redings Mill on 57 days; the top gust, 79 mph (measured), came on March 30, 2025. That peak matches hurricane-force speed. 7 tornado tracks passed within 10 miles; the strongest was rated EF3 on May 22, 2019. Wind failures start at the perimeter, so ask how eave, rake and ridge trim is fastened and which uplift rating the full assembly carries.
- Winter: protect the eaves
Redings Mill is in IECC climate zone 4A, and Newton County recorded 8 winter-storm days from 2016 through 2025. Winters here are milder than northern Illinois, but self-adhered underlayment at the eaves and snow guards over entries still belong in the scope.
- Owners who stay: buy the roof once
91% of homes in Redings Mill are owner-occupied. For owners staying put, the question is lifetime cost: one metal installation versus repeated asphalt tear-offs. Compare lifetime cost.
Two systems
Which of the two metal systems works best in Redings Mill?
Stone-Coated Steel Shingles in Redings Mill
Steel panels with a bonded stone granule finish that look like shingles, shake or tile. The natural fit for traditional pitched roofs, HOA neighborhoods and owners who want a familiar look with a steel core.
Standing Seam Metal Roofing in Redings Mill
Continuous vertical panels with raised, concealed-fastener seams. The fit for clean modern lines, farmhouse and lake homes, low-slope sections and fast snow shedding.
Community
About Redings Mill, Missouri
Redings Mill is a village in Newton County, part of the Joplin metropolitan area; the county seat is Neosho. The village is known for a historic 1930s-era pedestrian bridge over Shoal Creek; county documents include a rehabilitation plan addressing water damage, concrete repairs, and preventative sealing. Missouri’s Department of Natural Resources lists the Redings Mill Public Water System as a Newton County permit-to-dispense facility issued in 2023.
Community sources: Newton County, Missouri — About Newton County · Newton County Outlines Rehabilitation Plan for Historic Redings Mill Bridge · Missouri DNR — Redings Mill Public Water System · National Weather Service Springfield — Monthly Climate Normals · National Weather Service Springfield — Severe Weather Climatology
FAQ
Redings Mill metal roofing questions
How often does damaging hail reach Redings Mill, and does it matter for a metal roof?
Damaging hail is relatively frequent: 29 days with hail 1.0" or larger occurred within 10 miles from 2016–2025, including a largest hailstone of 2.75". That frequency and size matter because impact-rated metal roofing tested to UL 2218 Class 4 can reduce the chance of visible shingle damage and improve long-term performance in this hail environment.
What is the strongest storm wind recorded near Redings Mill?
Severe storm winds were recorded on 57 days at 58 mph or higher within 10 miles from 2016–2025, with a measured peak wind of 79 mph. These wind levels make secure edge, rake and ridge fastening, properly specified clips or fasteners, and attention to perimeter details important for metal roof performance during high-wind events.
Will an older house in Redings Mill need structural work for a metal roof?
Possibly, but plan for inspection: 55% of housing in Redings Mill was built before 1960, so many roofs may have aging decking or multiple layers. Older homes often require deck inspection and sometimes a full tear-off before installing a metal roof to ensure a sound substrate and proper attachment.
Which metal roof suits homes in Redings Mill: Stone-Coated Steel or Standing Seam?
Both systems are viable, but Stone-Coated Steel Shingles often suits the local housing character given the village scale and older, predominantly single-family detached stock. Standing Seam is a strong option for contemporary or high-slope profiles; final choice depends on roof geometry and aesthetic preferences.
Nearby
Communities near Redings Mill
Consultation
Schedule your Redings Mill roofing consultation
Tell us about the house. We'll inspect the roof, recommend Stone-Coated Steel or Standing Seam for it, and put the scope, warranty and financing options in writing.