Homeowner Decision Guides
Can Metal Roofing Withstand Illinois Hail?
Illinois metal roofing can handle many hail events, but no metal roof is hail-proof. Compare tested assemblies, installation details, and post-storm inspection needs before deciding.
Properly specified and installed metal roofing can withstand many Illinois hail events, but it is not hail-proof. Performance depends on the tested product or assembly, profile, steel substrate and finish, roof deck, fastening and flashing details, and the storm’s size and severity. Inspect for coating damage, displaced trim, dents, and leaks.
Key takeaways
- An impact rating is evidence for a documented product or assembly, not a promise that a roof will never dent or leak.
- Illinois hail varies by storm and location; NWS records include a 4.75-inch state record near Minooka.[1]
- Standing seam and stone-coated steel shingles need separate review of their deck, profile, details, and installation instructions.
- After hail, separate appearance from coating, attachment, flashing, water-shedding, and deck concerns.
How common and how large is hail in Illinois?
In the NWS Chicago forecast area, certified StormData from 1950–2024 shows about half of reported hail was 1 inch, roughly one-quarter was golf-ball size, and roughly 1 in 20 reports exceeded 2 inches.[1]
Exposure is not uniform across Illinois. NWS Lincoln directs central and southeast Illinois users to NOAA’s certified Storm Events Database for official reports.[2] Consider the storm track, reported date, roof orientation, and evidence at the address instead of relying on a statewide label.
| Factor | Standing Seam Metal Roofing | Stone-Coated Steel Shingles |
|---|---|---|
| Impact evidence | Request documentation for the proposed panel and assembly. | Request documentation for the proposed shingle and system. |
| Site review | Confirm deck, underlayment, attachment, penetrations, and flashings. | Confirm deck, underlayment, fastening, interlocks, penetrations, and flashings. |
| After hail | Review surfaces, seams, trim, coating, flashings, and interior signs. | Review courses, caps, alignment, coating, flashings, and interior signs. |
| Decision input | Use complete scope, data, geometry, and qualified site review. | Use complete scope, data, geometry, and qualified site review. |
What does an impact rating tell me about hail resistance?
UL 2218 is an impact-resistance standard for prepared roof-covering materials. Its four classes use steel balls dropped from specified heights to reproduce impact energies.[3] Request documentation naming the exact proposed product, test configuration, rating, and stated conditions—not merely a “Class 4” sales claim.
A rating is not a hail-proof promise. UL explains that its traditional method evaluates physical breach from the back side and does not account for every visible effect, including denting.[3] A dent, coating fracture, loose trim, puncture, and water-entry pathway are separate conditions.
Why do substrate, profile, and assembly affect performance?
A metal roof is an assembly: surface and finish, deck, underlayment, clips or fasteners, seams, flashings, valleys, penetrations, and transitions all matter. IBHS says metal panel systems may be evaluated with prescribed steel-ball or ice-ball impacts and must meet applicable code requirements.[4]
Bishop's installs Standing Seam Metal Roofing and Stone-Coated Steel Shingles. Neither is automatically right for every Illinois home. Slope, plane length, valleys, skylights, chimney details, deck condition, and manufacturer instructions determine fit. Stone-coated steel instructions separately address layout, fastening, valleys, ridges, vents, and penetrations.[5]
Can storm severity make a metal roof fail despite a good product?
Diameter is only one variable. Ice hardness, wind, travel direction, impact angle, repeat strikes, and hit location can change results across a single roof. The Minooka record confirms that unusually large hail can occur even though it is uncommon in the long report record.[1]
Record the storm date and safely take ground photographs. A qualified reviewer can compare observed conditions with product and installation documents. A useful report distinguishes what was observed from what could not be verified without safe access or further investigation.
What is the difference between cosmetic dents and functional damage?
Visible dents can matter to an owner, even when water shedding remains intact. IBHS says small dents without cracked or flaked paint typically do not affect a metal panel’s weatherability or structural performance; cracked or flaked paint can create corrosion concerns.[4] This is guidance, not a conclusion about any one home.
Ground-level appearance is not conclusive. Review surfaces and finish, seams or courses, ridge and hip pieces, flashings, penetrations, drainage areas, and interior moisture indicators. Do not walk a roof solely to inspect it; safe access, slope, weather, and manufacturer instructions set real limits.
How do installation, permits, and documentation affect outcomes?
Installation quality is performance work. The Metal Construction Association maintains resources on clips, seaming, flashings, sealants, fasteners, snow retention, solar attachments, cold-climate design, and repairs.[6] A scope should identify deck repairs, underlayment, flashing, trim, penetrations, ventilation, and closeout records—not just the covering name.
Illinois says existing-home repairs may be regulated by the local authority having jurisdiction and advises checking the city, village, or county.
What practical steps should Illinois homeowners take after hail?
First document the roof’s age, repairs, deck and ventilation observations, geometry, penetrations, and storm evidence. Then compare complete written scopes for Standing Seam Metal Roofing and Stone-Coated Steel Shingles. Ask for named components and current product-specific impact, wind, and code documentation relevant to the selected system.
Keep the final scope, change orders, photos, permit records if applicable, product data, care instructions, and written warranty. Bishop's states a 50-year warranty, but the current written warranty controls every term, condition, exclusion, remedy, transfer rule, and claim process. Hail resistance, appearance, water performance, and warranty coverage are not interchangeable.
When it fits
- You want product-specific documentation and a complete installation scope.
- Deck, geometry, drainage, and penetrations can be evaluated before selection.
- You accept that hail resilience does not eliminate cosmetic or functional storm risk.
- You will retain inspection, permit, product, warranty, and storm records.
When it may not fit
- You need a promise that a roof will never dent, leak, or need inspection.
- The project cannot accommodate needed deck, flashing, ventilation, or transition corrections.
- The property cannot be safely assessed for existing conditions and local requirements.
- You will choose only from a generic impact class rather than the proposed product and assembly.
This educational page is not an engineering report, forecast, code interpretation, insurance opinion, warranty determination, or quote. Hail performance and repair decisions are property-specific. Verify current product documents, written warranty terms, local requirements, and safe inspection findings for the home.