Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Wabash County, Illinois

Metal Roofing in Allendale, IL

Stone-coated steel and standing seam roofs for Allendale homes, specified against 5 days of 1-inch hail, 14 days of severe wind and zone 4A winters on record.

Quick answer

Bishop's Metal Roofing installs Stone-Coated Steel Shingles and Standing Seam Metal Roofing on Allendale, IL homes, and with 5 days of 1-inch-plus hail and 14 days of 58-mph-plus wind within 10 miles from 2016 through 2025, the detail to get right here is a tested uplift rating and secure perimeter trim.

Population
4372025 Census estimate
Median home built
1980ACS 2020–2024
1-inch hail days
5Within 10 mi, 2016–2025
Climate zone
4AIECC 2021
01

Local roof brief

What should Allendale homeowners know before choosing a metal roof?

Allendale homeowners face notable wind and tornado exposure: 14 days with 58+ mph winds and an estimated peak gust of 85 mph, which makes edge, rake and ridge fastening critical for any metal roof. Winter exposure is modest with 8 winter-storm event days in Wabash County, supporting use of ice-barrier underlayment at eaves and targeted snow retention above entries. Hail has occurred five days with 1.0-inch hail (largest 1.0 in on February 26, 2025), so impact-rated products tested to UL 2218 Class 4 are worth discussing. Half the housing in town was built before 1980 and the median year built is 1980, so decking inspection and a careful tear‑off decision are common on re-roofs. For Allendale’s predominantly single-family stock, Stone-Coated Steel often matches traditional roof lines, while Standing Seam suits simpler modern profiles; an on-site review will determine the best fit. Bishop's can review options tied to the individual roof.

02

Roof report

Allendale roof weather and housing report

Hail, 2016–2025, within 10 miles of Allendale
Days with hail 1 inch or larger57 reports
Days with hail 1.75 inches or larger0
Days with hail 2 inches or larger0
Largest hail reported1 inFebruary 26, 2025
Most recent 1-inch hailFebruary 26, 2025
Peak hail monthJune
Wind and tornadoes, 2016–2025
Days with wind 58 mph or stronger1420 reports
Highest wind85 mphEstimated, July 1, 2023
Tornado tracks within 10 miles6Strongest EF2, May 19, 2022
Winter and climate
IECC climate zone4AMixed, humid
Winter-storm days (Wabash County)8
Ice-storm days (Wabash County)0
Housing snapshot (ACS 2020–2024)
Median year built1980
Built before 196028%
Built before 198050%
Built 2000 or later18%
Median home value$91,000
Housing units208
Owner-occupied87%
Single-family detached69%

Storm counts are NOAA Storm Events reports within 10 miles of Allendale's Census center point, January 2016 through December 2025; winter days are coded to Wabash County. Reports depend on spotters and population, so rural totals run low. How we measure.

03

What it means

What does Allendale's record mean for a metal roof?

  1. Wind: the perimeter matters most

    Severe wind (58 mph or stronger) reached within 10 miles on 14 days, peaking at 85 mph (estimated) on July 1, 2023. That peak matches hurricane-force speed. 6 tornado tracks passed within 10 miles; the strongest was rated EF2 on May 19, 2022. Ask which tested uplift rating covers the whole assembly — panels, clips or nails, and trim — not just the panel itself.

  2. Winter: protect the eaves

    Allendale is in IECC climate zone 4A, and Wabash County recorded 8 winter-storm days from 2016 through 2025. Winters here are milder than northern Illinois, but self-adhered underlayment at the eaves and snow guards over entries still belong in the scope.

  3. Hail: check the impact rating

    5 days brought hail 1 inch or larger within 10 miles of Allendale from 2016 through 2025, topped by 1 inch (quarter-size) stones on February 26, 2025. June has the most reports in the local record. Most reported hail here stayed under 1.75 inches, which a properly installed steel roof handles without functional damage. Hail and impact ratings explained.

  4. 1980s housing: confirm layers and venting

    Allendale has 208 housing units; the median one was built in 1980 and 50% were built before 1980. Many of these houses are on a second or third roof by now, so plan on a tear-off and a look at the deck and attic venting before metal goes on.

  5. Owners who stay: buy the roof once

    87% of homes in Allendale are owner-occupied. For owners staying put, the question is lifetime cost: one metal installation versus repeated asphalt tear-offs. Compare lifetime cost.

04

Two systems

Which metal roof fits homes in Allendale?

Stone-Coated Steel Shingles in Allendale

Steel panels with a bonded stone granule finish that look like shingles, shake or tile. The natural fit for traditional pitched roofs, HOA neighborhoods and owners who want a familiar look with a steel core.

Standing Seam Metal Roofing in Allendale

Continuous vertical panels with raised, concealed-fastener seams. The fit for clean modern lines, farmhouse and lake homes, low-slope sections and fast snow shedding.

05

Community

About Allendale, Illinois

Allendale is an incorporated village in Wabash County, Illinois (Census place FIPS 00815) with an estimated population of 437. Wabash County was established in 1824, is named for the Wabash River, and has Mount Carmel as its county seat. The county uses precincts rather than township government.

Community sources: U.S. Census Bureau, Gazetteer Files · Illinois Regional Archives Depository: Wabash County · National Weather Service, Wabash River at Mount Carmel · Illinois Department of Transportation, FY2024 Motor Fuel Tax Fund

FAQ

Allendale metal roofing questions

What is the strongest storm wind recorded near Allendale?

Severe wind events within 10 miles include 14 days with winds of 58 mph or higher and an estimated peak wind of 85 mph (July 1, 2023). Those figures indicate attention to edge and fastener details and uplift resistance when specifying a metal roof.

Which metal roof suits homes in Allendale: Stone-Coated Steel or Standing Seam?

Both systems are used, but Stone-Coated Steel often suits the town’s predominantly single-family, traditionally styled homes and the local median year built of 1980. Standing Seam tends to suit simpler, modern rooflines; an on-site review of slope, penetrations and decking will determine the better match.

How does Allendale's climate zone change the underlayment under a metal roof?

Allendale is in IECC climate zone 4A and Wabash County recorded 8 winter-storm event days (2016–2025). That supports installing ice-barrier underlayment at eaves and considering snow retention near entries for winter performance.

Consultation

Schedule your Allendale roofing consultation

Tell us about the house. We'll inspect the roof, recommend Stone-Coated Steel or Standing Seam for it, and put the scope, warranty and financing options in writing.

We use your details only to schedule your consultation. See our privacy policy.
Schedule consultation Call now