Jersey County, Illinois
Metal Roofing in Grafton, IL
Stone-coated steel and standing seam roofs for Grafton homes, specified against 3 days of 1-inch hail, 24 days of severe wind and zone 5A winters on record.
Homes in Grafton, IL can choose Stone-Coated Steel Shingles and Standing Seam Metal Roofing from Bishop's Metal Roofing, and given 3 days of 1-inch-plus hail and 24 days of 58-mph-plus wind within 10 miles from 2016 through 2025, ice-barrier underlayment and snow retention for zone 5A winters should come first.
- Population
- 7732025 Census estimate
- Median home built
- 1994ACS 2020–2024
- 1-inch hail days
- 3Within 10 mi, 2016–2025
- Climate zone
- 5AIECC 2021
Local roof brief
What should you check before putting a metal roof on a home in Grafton?
Grafton sits in IECC climate zone 5A with 7 county winter-storm event days and no recorded ice-storm days (2016–2025). That climate profile supports ice-barrier underlayment at eaves and targeted snow retention above entries. The median home build year is 1994 and 45% of homes were built 2000 or later, so deck inspection and possible full tear-off are common concerns for older roofs while newer houses may trigger HOA or appearance checks. Severe winds have produced 24 days of 58+ mph events and an estimated 90 mph peak, so pay attention to edge, rake and ridge fastening and secure attachments for wind uplift; three nearby tornado tracks argue for robust fastening details. Three hail days ≥1.0" (largest 1.0" on March 30, 2025) suggests asking about UL 2218 Class 4 impact-rated options. Stone-Coated Steel often suits the local single-family, river-town character; Standing Seam can suit elevated or modern designs, but inspect the property before deciding.
What it means
How should Grafton's storm and housing record shape your roof?
- Snow load: plan retention and ice barrier
Grafton is in IECC climate zone 5A, and Jersey County recorded 7 winter-storm days from 2016 through 2025. Codes in snow country commonly require ice-barrier underlayment at the eaves; on metal, add snow guards wherever sliding snow would land on people, cars or a lower roof.
- Newer neighborhoods: clear the HOA first
45% of the 464 housing units in Grafton were built in 2000 or later (median year built 1994). Newer neighborhoods often have architectural review rules, so get the color and profile approved before ordering — Stone-Coated Steel's shingle and shake profiles usually clear appearance standards.
- Wind: ask about edge fastening
NOAA recorded 58-mph-plus wind within 10 miles of Grafton on 24 days; the top gust, 90 mph (estimated), came on April 29, 2017. That peak matches hurricane-force speed. 3 tornado tracks passed within 10 miles; the strongest was rated EF0 on March 14, 2024. Roofs fail at the edges first in wind like that; get the eave, rake and ridge fastening schedule and the assembly's uplift rating in the scope.
- Hail: know the local stone size
NOAA logged 1-inch-or-larger hail on 3 days within 10 miles of Grafton between 2016 and 2025; the biggest stones, 1 inch across (about a quarter), fell on March 30, 2025. February has the most reports in the local record. None of the reports reached 1.75 inches, so impact rating is a tiebreaker here rather than the deciding spec. Hail and impact ratings explained.
- Long ownership favors a last roof
87% of homes in Grafton are owner-occupied. If you plan to stay, compare one metal roof against the two or three asphalt roofs the same 50 years would otherwise take. Compare lifetime cost.
Roof report
Grafton storm, climate and housing data
| Days with hail 1 inch or larger | 33 reports |
|---|---|
| Days with hail 1.75 inches or larger | 0 |
| Days with hail 2 inches or larger | 0 |
| Largest hail reported | 1 inMarch 30, 2025 |
| Most recent 1-inch hail | March 30, 2025 |
| Peak hail month | February |
| Days with wind 58 mph or stronger | 2426 reports |
|---|---|
| Highest wind | 90 mphEstimated, April 29, 2017 |
| Tornado tracks within 10 miles | 3Strongest EF0, March 14, 2024 |
| IECC climate zone | 5ACold, moist |
|---|---|
| Winter-storm days (Jersey County) | 7 |
| Ice-storm days (Jersey County) | 0 |
| Median year built | 1994 |
|---|---|
| Built before 1960 | 24% |
| Built before 1980 | 38% |
| Built 2000 or later | 45% |
| Median home value | $276,000 |
| Housing units | 464 |
| Owner-occupied | 87% |
| Single-family detached | 65% |
Storm counts are NOAA Storm Events reports within 10 miles of Grafton's Census center point, January 2016 through December 2025; winter days are coded to Jersey County. Reports depend on spotters and population, so rural totals run low. How we measure.
Two systems
Stone-coated steel or standing seam: which suits Grafton?
Stone-Coated Steel Shingles in Grafton
Steel panels with a bonded stone granule finish that look like shingles, shake or tile. The natural fit for traditional pitched roofs, HOA neighborhoods and owners who want a familiar look with a steel core.
Standing Seam Metal Roofing in Grafton
Continuous vertical panels with raised, concealed-fastener seams. The fit for clean modern lines, farmhouse and lake homes, low-slope sections and fast snow shedding.
Community
About Grafton, Illinois
Grafton is a city in Jersey County, Illinois, at the confluence of the Mississippi and Illinois Rivers and lying below limestone bluffs. Route 100, part of the Great River Road and a National Scenic Byway, runs through the city. Population 773; land area 3.712 square miles.
Jersey County’s hazard mitigation plan assesses flooding, severe storms, severe winter storms, and tornadoes among its hazards. It also explains that riverine flooding affects identified areas while severe storms can be area-wide, and includes a Grafton map for pre-1999 structures in its severe-storm discussion. These are planning considerations, not a prediction about a particular home or a promise of roof performance. Before selecting a system, inspect the roof deck, flashing, penetrations, drainage, attic conditions, surrounding vegetation, and access. For a river-adjacent or older property, confirm site-specific flood information and any applicable local requirements with the appropriate officials and professionals; Bishop's can then discuss the roofing scope rather than assume hazard, code, or permit conclusions.
Community sources: Grafton Chamber of Commerce — About Grafton · Jersey County Tourism · U.S. Census Bureau QuickFacts — Jersey County, Illinois · Jersey County Hazard Mitigation Plan
FAQ
Grafton metal roofing questions
How strong have severe storm winds been around Grafton?
Severe storms near Grafton produced 24 days with winds of 58 mph or higher from 2016 through 2025, with the highest estimated wind at 90 mph on April 29, 2017. Those numbers indicate a need for wind-resistant fastening at edges, rakes and ridges on a metal roof and attention to uplift details.
How much snow and ice protection does a metal roof need in Grafton?
Grafton is in IECC climate zone 5A and Jersey County recorded 7 winter-storm event days (2016–2025) with zero ice-storm event days. That climate and winter-storm frequency support using an ice-barrier underlayment at eaves and considering snow retention or guards above entries and walkways where snow shed could create hazards.
Is a metal roof worth it on a newer home in Grafton?
Forty-five percent of Grafton homes were built in 2000 or later, so metal roofing is often compatible with newer construction aesthetic and roof decks, but check HOA or subdivision appearance requirements. A roof inspection will confirm whether a straightforward replacement or additional deck work is needed.
Should homes in Grafton get Stone-Coated Steel or Standing Seam?
Stone-Coated Steel often aligns with Grafton’s single-family, river-town character (65% single-family detached) and is commonly used in retrofit scenarios; Standing Seam is appropriate for more modern or elevated designs. Final choice depends on roof geometry, site conditions and local appearance requirements.
Nearby
Communities near Grafton
Consultation
Schedule your Grafton roofing consultation
Tell us about the house. We'll inspect the roof, recommend Stone-Coated Steel or Standing Seam for it, and put the scope, warranty and financing options in writing.