Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Platte County, Missouri

Metal Roofing in Platte Woods, MO

Metal roofs for Platte Woods's 1960s-era housing, matched to the hail, wind and zone 4A winters recorded here.

Quick answer

Bishop's Metal Roofing installs Stone-Coated Steel Shingles and Standing Seam Metal Roofing on Platte Woods, MO homes, and with 28 days of 1-inch-plus hail and 46 days of 58-mph-plus wind within 10 miles from 2016 through 2025, the detail to get right here is impact-rated steel.

Population
3952025 Census estimate
Median home built
1962ACS 2020–2024
1-inch hail days
28Within 10 mi, 2016–2025
Climate zone
4AIECC 2021
01

Local roof brief

What should you check before putting a metal roof on a home in Platte Woods?

Platte Woods sees frequent hail within 10 miles: 28 days of hail ≥1.0 inch, including 5 days ≥1.75 inch and one 2.0-inch event (March 6, 2017), so ask about impact-rated products tested to UL 2218 Class 4. Much of the housing stock is older (median year built 1962; 92% built before 1980), which means deck inspection and likely full tear-off of old layers. Severe winds have produced 46 days ≥58 mph and an estimated gust to 81 mph, so pay attention to edge, rake and ridge fastening details. County records show three ice-storm days and winter-storm activity, and the area is IECC climate zone 4A; consider ice-barrier underlayment at eaves and snow retention above entries. Stone-Coated Steel often matches the established residential character of Platte Woods, while Standing Seam suits cleaner, low-slope profiles and contemporary additions.

02

Roof report

The Platte Woods roof record: storms, climate and homes

Hail, 2016–2025, within 10 miles of Platte Woods
Days with hail 1 inch or larger2889 reports
Days with hail 1.75 inches or larger5
Days with hail 2 inches or larger1
Largest hail reported2 inMarch 6, 2017
Most recent 1-inch hailSeptember 16, 2025
Peak hail monthMay
Wind and tornadoes, 2016–2025
Days with wind 58 mph or stronger46149 reports
Highest wind81 mphEstimated, July 30, 2023
Tornado tracks within 10 miles0
Winter and climate
IECC climate zone4AMixed, humid
Winter-storm days (Platte County)7
Ice-storm days (Platte County)3Latest January 2020
Housing snapshot (ACS 2020–2024)
Median year built1962
Built before 196044%
Built before 198092%
Built 2000 or later3%
Median home value$334,000
Housing units214
Owner-occupied73%
Single-family detached100%

Storm counts are NOAA Storm Events reports within 10 miles of Platte Woods's Census center point, January 2016 through December 2025; winter days are coded to Platte County. Reports depend on spotters and population, so rural totals run low. How we measure.

03

What it means

What do these numbers mean for roofs in Platte Woods?

  1. Hail: impact class comes first

    NOAA logged 1-inch-or-larger hail on 28 days within 10 miles of Platte Woods between 2016 and 2025; the biggest stones, 2 inches across (about a hen egg), fell on March 6, 2017. Most of those reports came in May. The most recent 1-inch event was September 16, 2025. Stones that size dent most roofing, so ask for a product tested to UL 2218 Class 4 and read how the warranty treats cosmetic denting versus leaks. Hail and impact ratings explained.

  2. Older homes: plan the tear-off and deck check

    Half of Platte Woods's 214 housing units were built in or before 1962, and 44% predate 1960. On 1960s-era houses, expect to find more than one layer of shingles and board decking; a full tear-off lets the crew re-deck where needed and fix ventilation before metal goes on.

  3. Wind: the perimeter matters most

    NOAA recorded 58-mph-plus wind within 10 miles of Platte Woods on 46 days; the top gust, 81 mph (estimated), came on July 30, 2023. That peak matches hurricane-force speed. Ask which tested uplift rating covers the whole assembly — panels, clips or nails, and trim — not just the panel itself.

  4. Snow and ice: retention and ice barrier

    Platte Woods is in IECC climate zone 4A, and Platte County recorded 7 winter-storm days and 3 ice-storm days from 2016 through 2025 (most recent ice storm: January 2020). Winters here are milder than northern Illinois, but self-adhered underlayment at the eaves and snow guards over entries still belong in the scope.

04

Two systems

Which metal roof fits homes in Platte Woods?

Stone-Coated Steel Shingles in Platte Woods

Steel panels with a bonded stone granule finish that look like shingles, shake or tile. The natural fit for traditional pitched roofs, HOA neighborhoods and owners who want a familiar look with a steel core.

Standing Seam Metal Roofing in Platte Woods

Continuous vertical panels with raised, concealed-fastener seams. The fit for clean modern lines, farmhouse and lake homes, low-slope sections and fast snow shedding.

05

Community

About Platte Woods, Missouri

Platte Woods is a Missouri city in Platte County with an estimated 2025 population of 395. The municipal government includes a mayor and a four-member Board of Aldermen covering two wards; planning and zoning bodies handle local development. The community was developed in the 1930s on full-acre-or-larger lots and now contains both residential and business zones.

Community sources: Platte Woods official city overview · History of Platte Woods (official city website) · National Weather Service forecast for Platte Woods · Platte County, Missouri official government · Platte County official county maps

FAQ

Platte Woods metal roofing questions

How often does damaging hail reach Platte Woods, and does it matter for a metal roof?

Within 10 miles from 2016 through 2025 there were 28 days of hail 1.0 inch or larger, including 5 days ≥1.75 inch and one 2.0-inch event. That frequency and size make impact-rated products tested to UL 2218 Class 4 worth considering for material selection and warranty discussions.

How strong have severe storm winds been around Platte Woods?

Storm records within 10 miles show 46 severe-wind days of 58 mph or higher and an estimated peak gust of 81 mph. Those wind levels affect fastening strategy at eaves, rakes and ridges and require attention to engineered attachment details for metal roofing systems.

Should metal roofs in Platte Woods have snow guards and ice-barrier underlayment?

Platte Woods is in IECC climate zone 4A and the county logged 7 winter-storm days and 3 ice-storm days (latest ice storm January 2020). Ice-barrier underlayment at eaves and consideration of snow retention above entries are appropriate for local winter and ice conditions.

Is an older Platte Woods home ready for a metal roof as it stands?

Many homes in Platte Woods are older (median year built 1962; 92% built before 1980), so a roof deck inspection is needed and full tear-off of existing layers is often required before installing metal. Structural framing is not automatically disqualifying, but condition and loads must be evaluated.

Consultation

Schedule your Platte Woods roofing consultation

Tell us about the house. We'll inspect the roof, recommend Stone-Coated Steel or Standing Seam for it, and put the scope, warranty and financing options in writing.

We use your details only to schedule your consultation. See our privacy policy.
Schedule consultation Call now