Office: 1700 Scherer Pkwy, St Charles, MO Mon–Fri 8–6 · Sat 9–2 · Sun closed (314) 730-4080

Platte County, Missouri

Metal Roofing in Riverside, MO

Metal roofs for Riverside's 1970s-era housing, matched to the hail, wind and zone 4A winters recorded here.

Quick answer

For Riverside, MO, Bishop's Metal Roofing offers Stone-Coated Steel Shingles and Standing Seam Metal Roofing; the local record — 30 days of 1-inch-plus hail and 49 days of 58-mph-plus wind within 10 miles from 2016 through 2025 — makes impact-rated steel the first thing to confirm.

Population
4,5812025 Census estimate
Median home built
1977ACS 2020–2024
1-inch hail days
30Within 10 mi, 2016–2025
Climate zone
4AIECC 2021
01

Local roof brief

What should Riverside homeowners know before choosing a metal roof?

Riverside sees frequent hail: 30 days with hail 1.0 inch or larger and a largest reported hail size of 2.0 inches, so consider impact-rated products tested to UL 2218 Class 4. Severe wind is also a local factor: 49 severe-wind days at 58 mph or higher and a peak measured gust of 81 mph mean attention to edge, rake and ridge fastening details. Winters matter moderately: 7 winter-storm event days and 3 ice-storm days in Platte County suggest ice-barrier underlayment at eaves and snow retention above entries. Riverside sits in IECC climate zone 4A. With a median home build year of 1977 and 58% built before 1980, deck inspection and likely full tear-off of old layers are prudent. Stone-Coated Steel Shingles often fits Riverside home styles; Standing Seam suits more-modern or industrial roofs but site-specific review is required.

02

Roof report

Riverside storm, climate and housing data

Hail, 2016–2025, within 10 miles of Riverside
Days with hail 1 inch or larger30107 reports
Days with hail 1.75 inches or larger5
Days with hail 2 inches or larger1
Largest hail reported2 inMarch 6, 2017
Most recent 1-inch hailSeptember 16, 2025
Peak hail monthMay
Wind and tornadoes, 2016–2025
Days with wind 58 mph or stronger49198 reports
Highest wind81 mphMeasured, July 31, 2024
Tornado tracks within 10 miles0
Winter and climate
IECC climate zone4AMixed, humid
Winter-storm days (Platte County)7
Ice-storm days (Platte County)3Latest January 2020
Housing snapshot (ACS 2020–2024)
Median year built1977
Built before 196010%
Built before 198058%
Built 2000 or later31%
Median home value$411,000
Housing units1,692
Owner-occupied42%
Single-family detached41%

Storm counts are NOAA Storm Events reports within 10 miles of Riverside's Census center point, January 2016 through December 2025; winter days are coded to Platte County. Reports depend on spotters and population, so rural totals run low. How we measure.

03

What it means

What do these numbers mean for roofs in Riverside?

  1. Hail: impact class comes first

    30 days brought hail 1 inch or larger within 10 miles of Riverside from 2016 through 2025, topped by 2-inch (hen egg-size) stones on March 6, 2017. Most of those reports came in May. The most recent 1-inch event was September 16, 2025. Stones that size dent most roofing, so ask for a product tested to UL 2218 Class 4 and read how the warranty treats cosmetic denting versus leaks. Hail and impact ratings explained.

  2. Wind: the perimeter matters most

    Severe wind (58 mph or stronger) reached within 10 miles on 49 days, peaking at 81 mph (measured) on July 31, 2024. That peak matches hurricane-force speed. Ask which tested uplift rating covers the whole assembly — panels, clips or nails, and trim — not just the panel itself.

  3. Snow and ice: retention and ice barrier

    Riverside is in IECC climate zone 4A, and Platte County recorded 7 winter-storm days and 3 ice-storm days from 2016 through 2025 (most recent ice storm: January 2020). Ice-barrier underlayment at eaves and valleys is cheap insurance here, and snow guards are worth it over doors and walkways.

  4. 1970s homes: check the deck first

    Half of Riverside's 1,692 housing units were built in or before 1977, and 10% predate 1960. On 1970s-era houses, expect to find more than one layer of shingles and board decking; a full tear-off lets the crew re-deck where needed and fix ventilation before metal goes on.

04

Two systems

Stone-coated steel or standing seam: which suits Riverside?

Stone-Coated Steel Shingles in Riverside

Steel panels with a bonded stone granule finish that look like shingles, shake or tile. The natural fit for traditional pitched roofs, HOA neighborhoods and owners who want a familiar look with a steel core.

Standing Seam Metal Roofing in Riverside

Continuous vertical panels with raised, concealed-fastener seams. The fit for clean modern lines, farmhouse and lake homes, low-slope sections and fast snow shedding.

05

Community

About Riverside, Missouri

Riverside is a city in Platte County, incorporated June 21, 1951, with a setting shaped by the Missouri River valley, Line Creek Valley, surrounding ridges and the Belgium Bottoms. The community notes a growing industrial park, a riverboat casino and a high school.

Community sources: City History - Riverside, MO · National Weather Service Platte County forecast · FEMA Flood Maps · City of Parkville: About Parkville · Platte County Planning & Zoning: County Maps

FAQ

Riverside metal roofing questions

How common is damaging hail in Riverside, and what does it mean for a metal roof?

Riverside recorded 30 days with hail 1.0 inch or larger (2016–2025) and a largest reported hail of 2.0 inches. That frequency and size support specifying impact-rated metal roofing tested to UL 2218 Class 4 to reduce risk of visible damage and warranty issues.

What is the strongest storm wind recorded near Riverside?

NOAA records show 49 severe-wind days of 58 mph or higher and a highest measured gust of 81 mph. Those wind conditions require careful edge, rake and ridge fastening details and attention to clip and seam attachment for metal panels or shingles.

Should metal roofs in Riverside have snow guards and ice-barrier underlayment?

Platte County had 7 winter-storm event days and 3 ice-storm event days (latest ice storm January 2020), and Riverside is in IECC climate zone 4A. Install ice-barrier underlayment at eaves and consider snow retention above entries where roof slope and exposures concentrate snow.

What should owners of Riverside's mid-century homes check before a metal roof replacement?

With a median year built of 1977 and 58% built before 1980, inspect the roof deck for rot, flatness and fastening soundness. Expect a likely full tear-off of old layers and repair or replacement of decking before installing metal roofing to meet performance expectations.

Consultation

Schedule your Riverside roofing consultation

Tell us about the house. We'll inspect the roof, recommend Stone-Coated Steel or Standing Seam for it, and put the scope, warranty and financing options in writing.

We use your details only to schedule your consultation. See our privacy policy.
Schedule consultation Call now